製品詳細

Number of DAC channels (#) 4 DAC: resolution (Bits) 13 Temperature sensing Local, Remote Interface type I2C, SPI Features High current drive capability, EEPROM, Built-in sequencing control Operating temperature range (C) -40 to 125 Rating Catalog DAC: output full scale (Min) (V) -10 DAC: output full scale (Max) (V) 10
Number of DAC channels (#) 4 DAC: resolution (Bits) 13 Temperature sensing Local, Remote Interface type I2C, SPI Features High current drive capability, EEPROM, Built-in sequencing control Operating temperature range (C) -40 to 125 Rating Catalog DAC: output full scale (Min) (V) -10 DAC: output full scale (Max) (V) 10
VQFN (RGE) 24 16 mm² 4 x 4
  • Local and remote diode temperature sensor
    • ±2.5°C accuracy, maximum
    • 0.0625°C resolution
  • Internal EEPROM for autonomous operation
    • Four independent transfer functions storage
    • Device configuration storage
    • Open space for user storage
  • Four analog outputs
    • Four monotonic DACs: 1.22-mV resolution
    • Automatically configured output ranges:
      • Positive output voltage: 5.5 V, maximum
      • Negative output voltage: –10 V, minimum
    • High current drive capability:
      • Source up to 100 mA
      • Sink up to 20 mA
    • High capacitive load tolerant: up to 15 µF
  • Gate bias on and off control switches
    • Two programmable off voltages
      • Two auxiliary DACs: 1.22-mV resolution
    • Fast switching time: 50 ns, typical
    • Low resistance: 3 Ω, maximum
  • Built-in sequencing control
  • Internal 2.5-V reference
  • SPI and I2C interfaces: 1.7-V to 3.6-V operation
    • SPI: 4-wire Interface
    • I2C: Eight selectable slave addresses
  • Specified temperature range: –40°C to +125°C
  • Operating temperature range –40°C to +150°C
  • Local and remote diode temperature sensor
    • ±2.5°C accuracy, maximum
    • 0.0625°C resolution
  • Internal EEPROM for autonomous operation
    • Four independent transfer functions storage
    • Device configuration storage
    • Open space for user storage
  • Four analog outputs
    • Four monotonic DACs: 1.22-mV resolution
    • Automatically configured output ranges:
      • Positive output voltage: 5.5 V, maximum
      • Negative output voltage: –10 V, minimum
    • High current drive capability:
      • Source up to 100 mA
      • Sink up to 20 mA
    • High capacitive load tolerant: up to 15 µF
  • Gate bias on and off control switches
    • Two programmable off voltages
      • Two auxiliary DACs: 1.22-mV resolution
    • Fast switching time: 50 ns, typical
    • Low resistance: 3 Ω, maximum
  • Built-in sequencing control
  • Internal 2.5-V reference
  • SPI and I2C interfaces: 1.7-V to 3.6-V operation
    • SPI: 4-wire Interface
    • I2C: Eight selectable slave addresses
  • Specified temperature range: –40°C to +125°C
  • Operating temperature range –40°C to +150°C

The AFE10004 is a highly integrated, autonomous, power-amplifier (PA) precision analog front end (AFE) that includes four temperature compensation digital-to-analog converters (DACs), integrated EEPROM, and gate bias switches. The four DACs are programmed by four, independent, user-defined, temperature-to-voltage transfer functions stored in the internal EEPROM, allowing any temperature effects to be corrected without additional external circuitry. After start up, the device operates without intervention from a system controller to provide a complete system for setting and compensating bias voltages in control applications.

The AFE10004 has four gate bias outputs that are switched on and off through dedicated control pins. The gate bias switches are designed for fast response. In combination with the device PA_ON pin, this fast response enables correct power sequencing and protection of depletion-mode transistors, such as GaAs and GaN.

The function integration and wide operating temperature range make the AFE10004 an excellent choice as an all-in-one, autonomous bias control circuit for the power amplifiers found in RF systems. The flexible DAC output ranges and built-in sequencing features let the device be used as a biasing controller for a large variety of transistor technologies, such as LDMOS, GaAs, and GaN. Contact TI sales for the full data sheet.

The AFE10004 is a highly integrated, autonomous, power-amplifier (PA) precision analog front end (AFE) that includes four temperature compensation digital-to-analog converters (DACs), integrated EEPROM, and gate bias switches. The four DACs are programmed by four, independent, user-defined, temperature-to-voltage transfer functions stored in the internal EEPROM, allowing any temperature effects to be corrected without additional external circuitry. After start up, the device operates without intervention from a system controller to provide a complete system for setting and compensating bias voltages in control applications.

The AFE10004 has four gate bias outputs that are switched on and off through dedicated control pins. The gate bias switches are designed for fast response. In combination with the device PA_ON pin, this fast response enables correct power sequencing and protection of depletion-mode transistors, such as GaAs and GaN.

The function integration and wide operating temperature range make the AFE10004 an excellent choice as an all-in-one, autonomous bias control circuit for the power amplifiers found in RF systems. The flexible DAC output ranges and built-in sequencing features let the device be used as a biasing controller for a large variety of transistor technologies, such as LDMOS, GaAs, and GaN. Contact TI sales for the full data sheet.

ダウンロード
Information

Request more information

The full data sheet and other design resources are available. Request now

技術資料

star = TI が選定したこの製品の主要ドキュメント
結果が見つかりませんでした。検索条件をクリアして、もう一度検索を行ってください。
2 をすべて表示
種類 タイトル 最新の英語版をダウンロード 日付
* データシート AFE10004 4-Channel Power-Amplifier Precision Analog Front End With Integrated EEPROM and Gate Bias Switches データシート PDF | HTML 2020年 12月 8日
アプリケーション・ノート Temperature Compensation of Power Amplifier FET Bias Voltages PDF | HTML 2021年 4月 29日

設計および開発

追加の事項や他のリソースを参照するには、以下のタイトルをクリックすると、詳細ページを表示できます。

シミュレーション・ツール

PSPICE-FOR-TI TI Design / シミュレーション・ツール向け PSpice®

PSpice® for TI は、各種アナログ回路の機能評価に役立つ、設計とシミュレーション向けの環境です。設計とシミュレーションに適したこのフル機能スイートは、Cadence® のアナログ分析エンジンを使用しています。PSpice for TI は無償で使用でき、アナログや電源に関する TI の製品ラインアップを対象とする、業界でも有数の大規模なモデル・ライブラリが付属しているほか、選択された一部のアナログ動作モデルも利用できます。

設計とシミュレーション向けの環境である PSpice for TI (...)
パッケージ ピン数 ダウンロード
VQFN (RGE) 24 オプションの表示

購入と品質

記載されている情報:
  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL rating / リフローピーク温度
  • MTBF/FIT 推定値
  • 原材料組成
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果

推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス・デザインが存在する可能性があります。

サポートとトレーニング

TI E2E™ Forums (英語) では、TI のエンジニアからの技術サポートが活用できます

コンテンツは、TI 投稿者やコミュニティ投稿者によって「現状のまま」提供されるもので、TI による仕様の追加を意図するものではありません。使用条件をご確認ください。

TI 製品の品質、パッケージ、ご注文に関するお問い合わせは、TI サポートをご覧ください。​​​​​​​​​​​​​​

ビデオ