16-pin (D) package image

TB5T1D アクティブ

5V、デュアル、全二重、PECL トランシーバ

価格

数量 価格
+

品質に関する情報

定格 Catalog
RoHS はい
REACH はい
リード端子の仕上げ / ボールの原材料 NIPDAU
MSL rating / リフローピーク温度 Level-2-250C-1YEAR/Level-1-220C-UNLIM
品質、信頼性
、パッケージングの情報

記載されている情報:

  • RoHS
  • REACH
  • デバイスのマーキング
  • リード端子の仕上げ / ボールの原材料
  • MSL rating / リフローピーク温度
  • MTBF/FIT 推定値
  • 使用原材料
  • 認定試験結果
  • 継続的な信頼性モニタ試験結果
表示またはダウンロード
製造に関する追加情報

記載されている情報:

  • ファブ拠点
  • アセンブリ拠点
表示

輸出分類

*参考用

  • US ECCN (米国輸出規制分類番号):5A991B1

パッケージ情報

パッケージ | ピン数 SOIC (D) | 16
動作温度範囲 (℃) -40 to 85
パッケージ数量 | キャリア 40 | TUBE

TB5T1 の特徴

  • Functional Replacement for the Agere BTF1A
  • Driver Features
    • Third-State Logic Low Output
    • ESD Protection HBM > 3 kV, CDM > 2 kV
    • No Line Loading when VCC = 0
    • Capable of Driving 50- loads
    • 2.0-ns Maximum Propagation Delay
    • 0.2-ns Output Skew (typical)
  • Receiver Features
    • High-Input Impedance Approximately 8 k
    • 4.0-ns Maximum Propagation Delay
    • 50-mV Hysteresis
    • Slew Rate Limited (1 ns min 80% to 20%)
    • ESD Protection HBM > 3 kV, CDM > 2 kV
    • -1.1-V to 7.1-V Input Voltage Range
  • Common Device Features
    • Common Enable for Each Driver/Receiver Pair
    • Operating Temperature Range: -40°C to 85°C
    • Single 5.0 V ± 10% Supply
    • Available in Gull-Wing SOIC (JEDEC MS-013, DW) and SOIC (D) Package

TB5T1 に関する概要

The TB5T1 device is a dual differential driver/receiver circuit that transmits and receives digital data over balanced transmission lines. The dual drivers translate input TTL logic levels to differential pseudo-ECL output levels. The dual receivers convert differential-input logic levels to TTL output levels. Each driver or receiver pair has its own common enable control allowing serial data and a control clock to be transmitted and received on a single integrated circuit. The TB5T1 requires the customer to supply termination resistors on the circuit board.

The power-down loading characteristics of the receiver input circuit are approximately 8 k relative to the power supplies; hence, it does not load the transmission line when the circuit is powered down.

In circuits with termination resistors, the line remains impedance- matched when the circuit is powered down. The driver does not load the line when it is powered down.

All devices are characterized for operation from -40°C to 85°C.

The logic inputs of this device include internal pull-up resistors of approximately 40 k that are connected to VCC to ensure a logical high level input if the inputs are open circuited.

価格

数量 価格
+

キャリア オプション

パーツの数量に応じて、リール全体、カスタム リール、カット テープ、チューブ、トレイを含め、さまざまなキャリア オプションを選択できます。

カスタム リールとは、ご注文の数量に正確に一致するように 1 本のリールからカットした一定の長さのテープのことであり、ロット コードと日付コードのトレーサビリティを維持できます。業界標準に従い、真鍮製のスペーサーを使用し、カット済みテープの両側に 1 本の 18 インチ (45cm) フラット リーダー (先行) テープと、1 本の 18 インチ (45cm) フラット トレーラ (後続) テープを取り付けた状態であり、自動アセンブリ マシンに直接供給することができます。カスタム リールをご注文になった場合、リール処理料金がかかります。

カット テープとは、リールから切り離した一定の長さのテープのことです。ご注文の数量にするために、納品時に複数のカット テープまたは複数の箱に分割されることがあります。

在庫状況により、多くの場合、チューブトレイ梱包デバイスは、箱、またはチューブやトレイに梱包された形態で出荷されます。すべてのテープ、チューブ、またはサンプル ボックスは、TI 社内の静電気放電 (ESD) 保護と湿度感度レベル (MSL) 保護の要件に従って梱包してあります。

詳細はこちら

ロットと日付コードの選択が可能な場合があります。

カートにご希望の数量を追加し、チェックアウト プロセスを開始すると、既存の在庫からロットまたは日付コードを選択できる各種オプションが表示されます。

詳細はこちら