CC2540
- True Single-Chip BLE Solution: CC2540 Can Run Both Application and BLE Protocol
Stack, Includes Peripherals to Interface With Wide Range of Sensors, Etc. - 6-mm × 6-mm Package
- RF
- Bluetooth low energy technology Compatible
- Excellent Link Budget (up to 97 dB), Enabling Long-Range
Applications Without External Front End - Accurate Digital Received Signal-Strength Indicator (RSSI)
- Suitable for Systems Targeting Compliance With Worldwide
Radio Frequency Regulations: ETSI EN 300 328 and
EN 300 440 Class 2 (Europe), FCC CFR47
Part 15 (US), and ARIB STD-T66 (Japan)
- Layout
- Few External Components
- Reference Design Provided
- 6-mm × 6-mm QFN40 Package
- Low Power
- Active Mode RX Down to 19.6 mA
- Active Mode TX (–6 dBm): 24 mA
- Power Mode 1 (3-µs Wake-Up): 235 µA
- Power Mode 2 (Sleep Timer On): 0.9 µA
- Power Mode 3 (External Interrupts): 0.4 µA
- Wide Supply Voltage Range (2 V–3.6 V)
- Full RAM and Register Retention in All Power Modes
- TPS62730 Compatible
Low Power in Active Mode- RX Down to 15.8 mA (3 V Supply)
- TX (-6 dBm): 18.6 mA (3 V Supply)
- Microcontroller
- High-Performance and Low-Power 8051 Microcontroller Core
- In-System-Programmable Flash, 128 KB or 256 KB
- 8-KB SRAM
- Peripherals
- 12-Bit ADC with Eight Channels and Configurable Resolution
- Integrated High-Performance Op-Amp and Ultralow-Power Comparator
- General-Purpose Timers (One 16-Bit, Two 8-Bit)
- 21 General-Purpose I/O Pins (19× 4 mA, 2× 20 mA)
- 32-kHz Sleep Timer With Capture
- Two Powerful USARTs With Support for Several Serial Protocols
- Full-Speed USB Interface
- IR Generation Circuitry
- Powerful Five-Channel DMA
- AES Security Coprocessor
- Battery Monitor and Temperature Sensor
- Each CC2540 Contains a Unique 48-bit IEEE Address
- Software Features
- Bluetooth v4.0 Compliant Protocol Stack
for Single-Mode BLE Solution- Complete Power-Optimized Stack, Including Controller and
Host- GAP – Central, Peripheral, Observer, or Broadcaster
(Including Combination Roles) - ATT / GATT – Client and Server
- SMP – AES-128 Encryption and Decryption
- L2CAP
- GAP – Central, Peripheral, Observer, or Broadcaster
- Sample Applications and Profiles
- Generic Applications for GAP Central and Peripheral Roles
- Proximity, Accelerometer, Simple Keys, and Battery GATT Services
- Multiple Configuration options
- Single-Chip Configuration, Allowing Application to Run on CC2540
- Network Processor Interface for Applications Running on an External Microcontroller
- BTool – Windows PC Application for Evaluation, Development, and Test
- Complete Power-Optimized Stack, Including Controller and
- Development Tools
- CC2540 Mini Development Kit
- SmartRF Software
- Supported by IAR Embedded Workbench Software for 8051
- Bluetooth v4.0 Compliant Protocol Stack
- 2.4-GHz Bluetooth low energy Systems
- Mobile Phone Accessories
- Sports and Leisure Equipment
- Consumer Electronics
- Human Interface Devices (Keyboard, Mouse, Remote Control)
- USB Dongles
- Health Care and Medical
- TPS62730 is a 2 MHz Step Down Converter with Bypass Mode
- Extends Battery Lifetime by up to 20%
- Reduced Current in TX and RX
- 30 nA Bypass Mode Current to Support Low Power Modes
- RF Performance Unchanged
- Small Package Allows for Small Solution Size
- CC2540 Controllable
All other trademarks are the property of their respective owners
The CC2540 is a cost-effective, low-power, true system-on-chip (SoC) for Bluetooth low energy applications. It enables robust BLE master or slave nodes to be built with very low total bill-of-material costs. The CC2540 combines an excellent RF transceiver with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8-KB RAM, and many other powerful supporting features and peripherals. The CC2540 is suitable for systems where very low power consumption is required. Very low-power sleep modes are available. Short transition times between operating modes further enable low power consumption.
The CC2540 comes in two different versions: CC2540F128/F256, with 128 and 256 KB of flash memory, respectively.
Combined with the Bluetooth low energy protocol stack from Texas Instruments, the CC2540F128/F256 forms the market’s most flexible and cost-effective single-mode Bluetooth low energy solution.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ALGO-3P-UISP1-TI — 텍사스 인스트루먼트 장치용 Algocraft μISP1 프로그래머
μISP는 호스트 PC(RS-232, USB, LAN 연결 기능이 내장되어 있음)에 연결되어 작동하거나 단독 모드로 작동할 수 있습니다.
독립 실행형 모드의 프로그래밍 싸이클은 단순히 START 버튼을 누르거나 일부 TTL 제어 라인을 통해 실행될 수 있습니다.
컴팩트한 크기와 다양한 기능을 갖추고 있어 생산 환경, 수동 및 자동 프로세스에 간편하게 통합할 수 있습니다.
CC2541DK-MINI — CC2541 미니 개발 키트
CC2540EMK-USB — Bluetooth 저에너지 및 전용 무선 MCU
The CC2540 USB Evaluation Module Kit contains one CC2540 Bluetooth low energy USB Dongle. The dongle can be used to enable Bluetooth low energy on your PC. It can also be used as a packet sniffer for analyzing the BLE protocol and for software and system level debugging (use the free tool SmartRF (...)
CC-DEBUGGER — RF SoC(System-on-Chip)를 위한 디버거이자 프로그래머
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
ALGO-3P-WRITENOW — Algocraft WriteNow! 프로그래머
WriteNow! 시스템 내 프로그래머 시리즈는 프로그래밍 산업에서 획기적인 발전입니다. 프로그래머는 다양한 제조업체의 수많은 장치(마이크로컨트롤러, 메모리, CPLD 및 기타 프로그래머블 장치)를 지원하며 간편한 ATE/장치 통합을 위한 컴팩트한 크기를 가지고 있습니다. 이는 단독으로 작동하거나 호스트 PC(RS-232, LAN 및 USB 연결 기능이 내장되어 있음)에 연결되어 있으며 사용이 간편한 소프트웨어 유틸리티가 제공됩니다.
CCSTUDIO — Code Composer Studio integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)
BLE-STACK-1-X — II. BLE-STACK (Support for CC2540/CC2541)
TI의 ARM® Cortex®-M3 기반 무선 MCU(마이크로컨트롤러)의 SimpleLink™ Bluetooth® 저에너지 제품군을 위한 이 로열티 없는 BLE-Stack에는 단일 모드 BLE(Bluetooth 저에너지) 애플리케이션 개발을 빠르게 시작하는 데 필요한 모든 소프트웨어, 샘플 애플리케이션 및 설명서와 함께 모든 기능을 갖춘 블루투스 4.2 및 블루투스 5 인증 스택이 포함되어 있습니다.
특징
- 2Mbps 고속 모드, 장거리 모드(LE 코딩 PHY), 광고 확장(AE), 개인 정보 보호 1.2.1 및 채널 선택 알고리즘 (...)
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
RF-RANGE-ESTIMATOR — RF Range Estimator
SENSORTAG-SW — SimpleLink™ SensorTag 소프트웨어
The SensorTag includes an open hardware and software reference design for low cost and low power wireless IoT applications. The SensorTag is supplied with complete source code with everything you need to customize it for your application as well as source code examples for mobile apps.
BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx, CC23xx, and CC27xx devices
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio는 RF 시스템 설계자가 모든 TI CC1xxx 및 CC2xxx 저전력 RF 장치 설계 공정의 초기 단계에 무선 기능을 손쉽게 평가할 수 있도록 지원하는 Windows 애플리케이션입니다. 구성 레지스터 값 및 명령의 생성과 RF 시스템의 실무 테스트 및 디버깅을 간소화합니다.
SmartRF Studio는 다음과 같은 TI 장치를 지원합니다.
리소스
3P-WIRELESS-MODULES — 타사 무선 모듈 검색 툴
타사 무선 모듈 검색 툴은 개발자가 완제품 사양을 충족하는 제품을 식별하고 생산 준비가 완료된 무선 모듈을 조달하는 데 유용합니다. 검색 툴에 포함되어 있는 타사 모듈 공급업체는 TI 무선 연결 제품을 사용하여 무선 모듈을 설계 및 제조하는 전문성을 갖춘 독립 회사입니다.
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink™ CC2xxx 장치에 대한 하드웨어 설계 검토
SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 귀중한 피드백을 제공할 수 있는 주제 전문가와 일대일로 연락할 수 있는 방법을 제공합니다. 간단한 3단계 검토 요청 절차와 관련 기술 문서 및 리소스 링크는 여기서 확인할 수 있습니다.
시작하기
일반 설계 질문은 2.4GHz 하드웨어 설계 검토를 요청하기 전에 E2E 포럼에 게시해야 합니다.
하드웨어 설계 검토 요청 양식과 함께 전송할 다음 필수 문서가 준비되어 있는지 확인하세요:
- 데이터 시트, 설계 가이드, 사용 설명서 및 기타 하드웨어 리소스와 같이 제품 (...)
CC-ANTENNA-DK-RD — 1 GHz 미만 및 2.4 GHz 미만 안테나 레퍼런스 디자인
The Antenna Board reference design contains various low-cost antenna solutions for both sub-1 GHz and 2.4 GHz short range wireless systems.
CC2530TDKBALUN-RD — CC253x에 최적화된 TDK Corporation 발룬
The CC2530EM reference design contains schematics and layout files for the CC2530 and contains one part from TDK Corporation interfacing the antenna (documented in AN104).
The TDK Corporation part realizes the balun-, filter- an impedance matching-function and is custom made to be operated with (...)
CC2540TPS62730EM-RD — CC2540 및 TPS62730 평가 모듈 레퍼런스 디자인
The CC2540EM DCDC VDD reference design contains schematics and layout files for the CC2540EM DCDC VDD module. The reference design demonstrates good techniques for CC2540 decoupling and RF layout. For optimum RF performance, the reference design should be copied accurately. This is a 4-layer (...)
CC2592EMK-RD — 독립형 2.4GHz 범위 확장기 레퍼런스 디자인
This standalone 2.4 GHz range extender reference design provides all the information needed to use the SimpleLink™ CC2592 range extender (PA/LNA front end) with any 2.4 GHz RF radio in a wide range of applications, including sensor mesh networks and gateways. The CC2592 range extender contains PA, (...)
TIDC-CC2540-BLE-USB — CC2540 Bluetooth 저에너지 USB 동글 레퍼런스 디자인
The CC2540 USB Dongle is a complete example of how to use the USB enabled Bluetooth Low Energy (BLE) Wireless MCU. The reference design can be used to enable Bluetooth Smart and Internet of Things applications on any system that contains a USB host.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHA) | 40 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.