BLE-STACK
블루투스 저에너지 소프트웨어 스택
BLE-STACK
개요
TI의 ARM® Cortex®-M3 기반 무선 MCU(마이크로컨트롤러)의 SimpleLink™ Bluetooth® 저에너지 제품군을 위한 이 로열티 없는 BLE-Stack에는 단일 모드 BLE(Bluetooth 저에너지) 애플리케이션 개발을 빠르게 시작하는 데 필요한 모든 소프트웨어, 샘플 애플리케이션 및 설명서와 함께 모든 기능을 갖춘 블루투스 4.2 및 블루투스 5 인증 스택이 포함되어 있습니다.
특징
- 2Mbps 고속 모드, 장거리 모드(LE 코딩 PHY), 광고 확장(AE), 개인 정보 보호 1.2.1 및 채널 선택 알고리즘 #2에 대한 Bluetooth 5 지원. (BLE5-Stack만 해당)
- 모든 Bluetooth 코어 사양 4.2 기능에 대한 완벽한 지원: LE 보안 연결, LE 데이터 길이 연장 및 LE 개인 정보 보호 1.2.
- 모든 BLE 장치 역할에 대한 샘플 애플리케이션: 중앙, 주변 장치, 브로드캐스터/비컨 및 옵저버.
- 주변 장치 및 비컨 구성에서 32kHz 크리스탈 없이 작동 가능.
- TI의 OTA(Over-The-Air) 다운로드 서비스 및 툴을 사용한 장치 펌웨어 업그레이드.
- 동시 마스터/슬레이브 다중 역할 작동 및 최대 8개의 동시 연결 지원을 포함한 고급 토폴로지.
- CC2650 원격 제어 키트에서 Voice-over-BLE 지원.
- 독립형 SoC(System-on-Chip) 및 네트워크 프로세서 소프트웨어 구성
- 인기 있는 Apple iBeacon® 및 Google Eddystone™ 형식을 포함한 주변 기기 및 비콘과 같은 애플리케이션을 위한 초저전력 광고 및 연결 상태.
- TI-RTOS 프레임워크를 기반으로 구축되었으며 주변 장치 드라이버 및 고급 전원 관리 라이브러리를 포함함.
- 인증된 프로파일을 갖춘 다양한 샘플 애플리케이션을 통해 시장 출시 시간 단축.
- Bluetooth 4.2에 대한 인증 테스트 시간을 줄여주는 Bluetooth 인증 설계 목록.
- 애플리케이션 메모리를 극대화하는 유연한 프로토콜 스택 구성 옵션.
- ARM® 및 Code Composer Studio™ IDE(통합 개발 환경) 툴 체인을 위한 IAR Embedded Workbench에서 지원됨.
보관된 릴리스
모든 개선 사항과 새로운 기능을 활용할 수 있도록 최신 릴리스를 사용하는 것이 좋습니다. 이전 BLE-Stack 릴리스는 여기에서 확인할 수 있습니다.
다운로드
BLE-STACK-1-X — II. BLE-STACK (Support for CC2540/CC2541)
지원되는 제품 및 하드웨어
BLE-STACK-1-X — II. BLE-STACK (Support for CC2540/CC2541)
Windows Installer for Simplelink BLE 1 x SDK
문서
Archive Installers for Simplelink BLE 1 x SDK
출시 정보
Texas Instruments' Bluetooth® Low Energy BLE-Stack™ 1.5.2 software development kit (SDK) for the CC2540 and CC2541 wireless MCUs provides a Bluetooth 5.0 qualified software protocol stack that includes all necessary software to get started on the development of single-mode and network processor Bluetooth Low Energy applications. The BLE-Stack 1.5.2 SDK is available royalty-free to customers using TI’s CC2540/41 Bluetooth Low Energy system-on-chip (SoC) family and supports development kits such as the CC2541 mini development kit and CC2540 evaluation module kit. Application development with this SDK is enabled by IAR Embedded Workbench for 8051.
BLE-Stack 1.5.2 is a maintenance update to the previous BLE-STACK 1.5.1 software and contains one bug fix.
새 소식
- Fixed an issue with the pairing process. An initiator will now reject a confirmation value identical to its local confirm value (BLESTACK-5453).
BLE-STACK-2-X — BLE-STACK - V2.2 (Support for CC2640/CC2650)
지원되는 제품 및 하드웨어
제품
저전력 2.4GHz 제품
하드웨어 개발
개발 키트
평가 보드
BLE-STACK-2-X — BLE-STACK - V2.2 (Support for CC2640/CC2650)
제품
저전력 2.4GHz 제품
하드웨어 개발
개발 키트
평가 보드
문서
Archive Installers for Simplelink BLE 2 x SDK
출시 정보
This is version 2.2.8 of the TI Bluetooth® low energy protocol stack Software Development Kit (SDK). The BLE-Stack SDK allows for the development of single-mode Bluetooth low energy (BLE) applications on TI's first generation SimpleLink Bluetooth low energy CC2640 and Multi-Standard CC2650 wireless microcontroller units (MCUs) supporting version 5.1 of the Bluetooth specification with features defined by version 4.2 of the Bluetooth specification. The CC26x0 family of wireless MCUs includes a 32-bit Arm® Cortex™-M3 as the main application CPU running at 48 MHz, a dedicated Cortex-M0 processor for the radio / Physical Layer (PHY), and an autonomous Sensor Controller Engine for low-power sensing applications. The BLE protocol stack is built on top of the TI Real-time Operating System (TI-RTOS) which provides advanced power management and flexible peripheral driver capabilities allowing the development of highly optimized and power efficient standalone or network processor applications. The TI-RTOS SDK is installed during the BLE-Stack SDK installation.
Version 2.2.8 of the BLE-Stack is a maintenance update to TI's existing royalty-free Bluetooth low energy software protocol stack which is certified for Bluetooth specification version 5.1. This release includes support for all core specification version 4.2 Low Energy (LE) features as well as several development kits. This protocol stack update is in addition to support of all major Bluetooth LE core specification version 4.1 features, including support for up to 8 master or slave BLE connections. Please note that no Bluetooth 5 or Bluetooth 5.1 features are supported. A few examples of what can be created using the sample applications in this SDK and/or the additional resources found in the Examples section below include Bluetooth beacons incorporating the popular Apple iBeacon® and Eddystone™ formats, glucose, heart rate and fitness monitors, dongles for cable replacement via a BLE Serial Port Bridge and industrial motor monitors.
See What's New section for an overview of the changes included in this release. The Bluetooth core specification version 4.2 features supported in this release allow development of the most secure and power efficient products incorporating the Bluetooth low energy specification.
새 소식
- [PSIRT-129] The generate key functions (ECCROMCC26XX_genKeys, and ECC_generateKey) shall now validate the ECC key pair