DP83848-EP
- Low-power 3.3-V, 0.18-µm CMOS technology
- Low-power consumption < 270-mW typical
- 3.3-V MAC interface
- Auto-MDIX for 10/100 Mbps
- Energy detection mode
- 25-MHz clock out
- SNI interface (configurable)
- RMII rev. 1.2 interface (configurable)
- MII serial management interface (MDC and MDIO)
- IEEE 802.3u MII
- IEEE 802.3u auto-negotiation and parallel detection
- IEEE 802.3u ENDEC, 10BASE-T transceivers and filters
- IEEE 802.3u PCS, 100BASE-TX transceivers and filters
- IEEE 1149.1 JTAG
- Integrated ANSI X3.263 compliant TP-PMD physical sublayer with adaptive equalization and baseline wander compensation
- Error-free operation up to 150 m
- Programmable LED support link, 10/100 Mbps mode, activity, and collision detect
- Single register access for complete PHY status
- 10/100 Mbps packet BIST (built in self test)
- Lead-free 48-pin PQFP packages 7 mm × 7 mm
The number of applications requiring Ethernet connectivity continues to increase. Along with this increased market demand is a change in application requirements. The DP83848-EP was designed to allow Ethernet connectivity in the harshest environments. Our device meets IEEE 802.3u standards over a military temperature range of –55°C to 125°C. This device is ideally suited for harsh environments for example avionics, defense and industrial control applications.
The DP83848-EP is a highly reliable, feature rich robust device which includes enhanced ESD protection, MII, and RMII for maximum flexibility in MPU selection all in a 48-pin PQFP package.
The DP83848-EP features integrated sublayers to support both 10BASE-T and 100BASE-TX Ethernet protocols, which ensures compatibility and interoperability with all other standards based Ethernet solutions.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DP83848I-POE-EK — PHYTER® 산업용 온도 단일 포트 10 100Mbs 이더넷 물리적 계층 트랜시버
DP83848 10/100Mbps 이더넷 PHYTER(물리적 계층) POE(Power over Ethernet) MAU(미디어 연결 유닛) EVK(평가 키트)에 관심을 가져 주셔서 감사합니다. PHYTER POE MAU는 완전한 기능을 갖춘 DP83848 보드로, POE 네트워크에 견고한 이더넷 네트워크 연결을 제공하는 회로를 지원합니다. POE 준수 PSE(Power Supply Equipment)에 연결된 경우 네트워크 케이블에서 전원을 끌어오도록 보드를 구성할 수 있습니다. 이 보드는 IEEE 802.3 준수 (...)
DP83848K-MAU-EK — 미니 LS, 단일 포트 및 10/100Mbs를 지원하는 PHYTER™ 이더넷 물리적 계층 트랜시버
The DP83848K addresses the quality, reliability and small form factor required for space-sensitive applications in embedded systems operating in the industrial temperature range. Use the DP83848K-MAU-EK to evaluate our mini-LS, industrial temperature, single-port, 10/100 Mbps PHYTER™ ethernet (...)
DP83848SW-LINUX — DP83848용 Linux 드라이버
The Linux driver supports the DP83848 Ethernet physical layer (PHY) device. The Linux driver supports communication through MII/MDIO and registers with the PHY framework of the Linux kernel.
Linux mainline status
Available in Linux mainline: Yes
Available through git.ti.com: N/A
Supported Devices:
- (...)
DIEP — Debug Interface for Ethernet PHYs (DIEP)
텍사스 인스트루먼트의 이더넷 물리적 계층(PHY) 트랜시버용 드라이버는 직렬 관리 인터페이스(MDC/MDIO)를 통한 통신을 지원하여 PHY 레지스터를 구성하고 읽습니다. Linux 및 RTOS 드라이버는 github에서 찾을 수 있습니다.
USB-2-MDIO — USB-2-MDIO Tool v1.0
USB-2-MDIO 소프트웨어 툴을 사용하면 텍사스 인스트루먼트의 이더넷 PHY가 MDIO 상태 및 장치 제어 레지스터에 액세스할 수 있습니다. USB-2-MDIO 툴에는 경량 GUI로 인터페이싱하는 TI의 MSP430 ™ MCU용 LaunchPad™ 개발 키트가 포함되어 있습니다. LaunchPad 개발 키트는 버스에 연결된 PHY의 레지스터를 조작할 수 있는 MDIO 버스 컨트롤러를 구현합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HLQFP (PTB) | 48 | Ultra Librarian |
| HTQFP (PHP) | 48 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.