DS100BR111A
- Two Channel Repeaters for up to 10.3 Gbps
- DS100BR111 : 1x Bidirectional Lane
- DS100BR210: 2x Unidirectional Channels
- DS100BR111A : 1x Bidirectional Lane
- Low 65 mW/channel (Typical) Power Consumption,
with Option to Power Down Unused Channels - Advanced Signal Conditioning Features
- Receive Equalization up to +36 dB
- Transmit De-emphasis up to –12 dB
- Transmit VOD Control: 600 to 1200 mVp-p
- Low Residual DJ at 10.3 Gbps
- Programmable Via Pin Selection, EEPROM, or
SMBus Interface - Single Supply Voltage: 2.5 V or 3.3 V
- Flow-thru Pinout in 4 mm × 4 mm 24-pin
Leadless WQFN Package - 5 kV HBM ESD Rating
- –40 to 85°C Operating Temperature Range
The DS100BR111A is an extremely low power, high performance repeater designed to support serial links with data rates up to 10.3 Gbps. The DS100BR111A pinout is configured as one bidirectional lane (one transmit, one receive channel). The DS100BR111A inputs feature a powerful 4-stage continuous time linear equalizer (CTLE) to provide a boost of up to +36 dB at 5 GHz and open an input eye that is completely closed due to inter-symbol interference (ISI) induced by the interconnect mediums such as board traces or twin-axial copper cables. The transmitter features a programmable output de-emphasis driver with up to 12 dB and can drive output voltage levels from 600 mVp-p to 1200 mVp-p.
The programmable settings can be applied via pin control, SMBus protocol, or an external EEPROM. In the EEPROM mode, the configuration information is automatically loaded on power up, thereby eliminating the need for an external microprocessor or software driver. The DS100BR111A consumes just 65 mW/channel (typical), and allows the option to turn off unused channels. This ultra low power consumption eliminates the need for external heat sinks and simplifies thermal management in active cable applications.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | DS100BR111A Ultra Low Power 10.3 Gbps 1-Lane Repeaters with Input Equalization and Output De-Emphasis datasheet (Rev. D) | PDF | HTML | 2015/01/30 |
Application note | Understanding EEPROM Programming for High Speed Repeaters and Mux Buffers | 2014/10/09 | ||
User guide | DS100BR111AEVK User Guide SMA Evaluation Kit | 2014/04/09 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
SIGCONARCHITECT-WRTE — SigCon Architect With RTE v2.0.0.8
지원되는 제품 및 하드웨어
제품
PCIe, SAS 및 SATA IC
이더넷 리타이머, 리드라이버 및 멀티플렉서 버퍼
직렬 디지털 인터페이스(SDI) IC
하드웨어 개발
평가 모듈(EVM)용 GUI
평가 보드
인터페이스 어댑터
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
패키지 | 핀 | 다운로드 |
---|---|---|
WQFN (RTW) | 24 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.