인터페이스 고속 시리얼라이저/디시리얼라이저 FPD-Link 시리얼라이저/디시리얼라이저

DS90UB949-Q1

활성

1080p HDMI-FPD-Link III 브리지 시리얼라이저

제품 상세 정보

Applications In-vehicle Infotainment (IVI) Input compatibility HDMI Function Serializer Output compatibility FPD-Link III LVDS Color depth (bpp) 24 Features Low-EMI Point-to-Point Communication Signal conditioning Adaptive Equalizer EMI reduction SSC Compatible Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
Applications In-vehicle Infotainment (IVI) Input compatibility HDMI Function Serializer Output compatibility FPD-Link III LVDS Color depth (bpp) 24 Features Low-EMI Point-to-Point Communication Signal conditioning Adaptive Equalizer EMI reduction SSC Compatible Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
VQFN (RGC) 64 81 mm² 9 x 9
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 2: –40°C to +105°C, TA
  • Supports TMDS clock up to 170 MHz for WUXGA (1920x1200) and 1080p60 resolutions with 24-bit color depth
  • Single and dual FPD-Link III outputs
    • High-definition multimedia (HDMI) v1.4b inputs
      • HDMI-mode DisplayPort (DP++) inputs
      • HDMI audio extraction for up to 8 channels
      • High-speed back channel supporting GPIO up to 2 Mbps
      • Supports up to 15 meters of cable with automatic temperature and aging compensation
      • Monitors spread-spectrum input clock to reduce EMI
      • I2C (master/slave) with 1-Mbps fast-mode plus
      • SPI pass-through interface
      • Backward-compatible with DS90UB926Q-Q1 and DS90UB928Q-Q1 FPD-Link III deserializers
      • AEC-Q100 qualified for automotive applications
        • Device temperature grade 2: –40°C to +105°C, TA
      • Supports TMDS clock up to 170 MHz for WUXGA (1920x1200) and 1080p60 resolutions with 24-bit color depth
      • Single and dual FPD-Link III outputs
        • High-definition multimedia (HDMI) v1.4b inputs
          • HDMI-mode DisplayPort (DP++) inputs
          • HDMI audio extraction for up to 8 channels
          • High-speed back channel supporting GPIO up to 2 Mbps
          • Supports up to 15 meters of cable with automatic temperature and aging compensation
          • Monitors spread-spectrum input clock to reduce EMI
          • I2C (master/slave) with 1-Mbps fast-mode plus
          • SPI pass-through interface
          • Backward-compatible with DS90UB926Q-Q1 and DS90UB928Q-Q1 FPD-Link III deserializers

          The DS90UB949-Q1 is an HDMI to FPD-Link III bridge device which, in conjunction with the FPD-Link III DS90UB940-Q1/DS90UB948-Q1 deserializers, supplies 1-lane or 2-lane high-speed serial streams over cost-effective 50-Ω single-ended coaxial or 100-Ω differential shielded twisted-pair (STP) cables. It serializes an HDMI v1.4b input supporting video resolutions up to WUXGA and 1080p60 with 24-bit color depth.

          The FPD-Link III interface supports video and audio data transmission and full duplex control, including I2C and SPI communication, over the same differential link. The consolidation of video data and control over two differential pairs can reduce the interconnect size and weight and can simplify system design. EMI is minimized by the use of low-voltage differential signaling, data scrambling, and randomization. In backward-compatible mode, the device supports up to WXGA and 720p resolutions with 24-bit color depth over a single differential link.

          The DS90UB949-Q1 supports multi-channel audio received through HDMI or an external I2S interface. The device also supplies an optional auxiliary audio interface.

          The DS90UB949-Q1 is an HDMI to FPD-Link III bridge device which, in conjunction with the FPD-Link III DS90UB940-Q1/DS90UB948-Q1 deserializers, supplies 1-lane or 2-lane high-speed serial streams over cost-effective 50-Ω single-ended coaxial or 100-Ω differential shielded twisted-pair (STP) cables. It serializes an HDMI v1.4b input supporting video resolutions up to WUXGA and 1080p60 with 24-bit color depth.

          The FPD-Link III interface supports video and audio data transmission and full duplex control, including I2C and SPI communication, over the same differential link. The consolidation of video data and control over two differential pairs can reduce the interconnect size and weight and can simplify system design. EMI is minimized by the use of low-voltage differential signaling, data scrambling, and randomization. In backward-compatible mode, the device supports up to WXGA and 720p resolutions with 24-bit color depth over a single differential link.

          The DS90UB949-Q1 supports multi-channel audio received through HDMI or an external I2S interface. The device also supplies an optional auxiliary audio interface.

          다운로드 스크립트와 함께 비디오 보기 비디오

          기술 자료

          star =TI에서 선정한 이 제품의 인기 문서
          검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
          1개 모두 보기
          상위 문서 유형 직함 형식 옵션 날짜
          * Data sheet DS90UB949-Q1 1080p HDMI to FPD-Link III Bridge Serializer datasheet (Rev. B) PDF | HTML 2019/08/05

          설계 및 개발

          추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

          평가 보드

          DS90UB949-Q1EVM — DS90UB949-Q1 평가 모듈

          The DS90UB949-Q1 Evaluation Module converts HDMI to FPD-Link III. This kit will demonstrate the functionality and operation of the DS90UB949-Q1. The DS90UB949-Q1 is an HDMI to FPD-Link III Serializer which, in conjunction with the DS90Ux948/DS90Ux940 Deserializers, takes the data from HDMI serial (...)

          사용 설명서: PDF
          TI.com에서 구매할 수 없음
          애플리케이션 소프트웨어 및 프레임워크

          ALP Analog LaunchPad Framework Utility

          Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:

          • Local and remote device access
          • (...)
          지원되는 제품 및 하드웨어

          지원되는 제품 및 하드웨어

          지원 소프트웨어

          ALP-PROFILE-UPDATE Analog LaunchPad Profile Update Software

          Analog LaunchPad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). ALP software enables device- and system-level evaluation with powerful built-in features, including:

          • Local and remote device access
          • (...)
          지원되는 제품 및 하드웨어

          지원되는 제품 및 하드웨어

          시뮬레이션 모델

          DS90UB949A-Q1 IBIS Model (Rev. A)

          SNLM186A.ZIP (51 KB) - IBIS Model
          시뮬레이션 툴

          PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

          TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

          TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
          시뮬레이션 툴

          TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램

          TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
          사용 설명서: PDF
          패키지 CAD 기호, 풋프린트 및 3D 모델
          VQFN (RGC) 64 Ultra Librarian

          주문 및 품질

          포함된 정보:
          • RoHS
          • REACH
          • 디바이스 마킹
          • 납 마감/볼 재질
          • MSL 등급/피크 리플로우
          • MTBF/FIT 예측
          • 물질 성분
          • 인증 요약
          • 지속적인 신뢰성 모니터링
          포함된 정보:
          • 팹 위치
          • 조립 위치

          권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

          지원 및 교육

          TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

          콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

          품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

          동영상