DS90UB9702-Q1
- AEC-Q100 Qualified for automotive applications:
- Device temperature grade 2: –40℃ to 105℃
- Deserializer aggregates data from up to 4 sensors simultaneously
- Supports 7/8MP+ imagers
- Line rate at 7.55 Gbps
- Single-ended coaxial or Shielded Twisted-Pair (STP) cable
- Power-over-Cable (PoC) support
- CSI v2.1 Compliant system interface
- Supports up to 2 MIPI CSI-2 output ports and 1 replication port
- CSI Port 0: MIPI CSI-2 output port
- CSI Port 1: MIPI CSI-2 output port
- CSI Port 2: replication port
- 16 Virtual Channels and VC-ID remapping
- Supports up to 2 MIPI CSI-2 output ports and 1 replication port
- MIPI D-PHY v2.1 compatible
- Up to 4 data lanes with 2 clocks per port
- Up to 2.5 Gbps per lane, 10 Gbps per port
- Quad CMLOUT output ports for off-board processing
- 4 x CMLOUT ports replicated from 4 x FPD RX ports
- Capable of driving another deserializer at the same line rate
- 10 GPIO Pins for sensor synchronization and diagnostics
- Dual I2C ports
- Frozen frame detection
- Automatic receiver equalization
- Compatible with DS90UB971-Q1, DS90UB981-Q1, DS90UB953-Q1, DS90UB953A-Q1, DS90UB951-Q1, DS90UB935-Q1, DS90UB933-Q1, and DS90UB913A-Q1 serializers
- Low Power Sleep Mode with GPIO-state retention
The DS90UB9702-Q1 is an FPD-Link deserializer that delivers robust ultra-high-speed 7.55 Gbps forward channel and 47.1875 Mbps Bidirectional Control Channel for connecting up to four raw data sensors to central processing units over an automotive coaxial or STP cable. When coupled with DS90UB971-Q1 serializer, the deserializer receives video data from imagers supporting ultra-high resolutions (8MP+/40fps) or multiple sensors in various topologies.
Data is received and aggregated into two MIPI CSI-2 D-PHY outputs for interfacing with a downstream processor. An additional CSI port is used for port replication. The flexible MIPI CSI-2 outputs support multiple virtual channels interleaving per port to differentiate multiple sensors, exposures, and data types. This functionality features video aggregation and replication modes and supports input-to-output port as well as virtual channel (VC-ID) remapping.
Advanced data protection and diagnostic features support overall system functional safety. Multiple levels of data integrity checking and protection in conjunction with programmable health status interrupt helps ensure robust sensor module and link operation in vehicles.
추가 정보 요청
전체 데이터 시트를 사용할 수 있습니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DS90UB9702 -Q1 Automotive FPD-Link IV Deserializer Hub With D-PHY CSI-2 Output Ports for 8MP+ Cameras & Other Sensors datasheet | PDF | HTML | 2023. 12. 28 | |
| 애플리케이션 노트 | FPD-Link ADAS Power-Over-Coax Design Guidelines (Rev. B) | PDF | HTML | 2025. 10. 24 | ||
| 인증서 | DS90UB9702-Q1EVM EU Declaration of Conformity (DoC) | 2020. 7. 31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DS90UB9702-Q1EVM — DS90UB9702-Q1 평가 모듈
ALP — Analog LaunchPad Framework Utility
FPD-LINK-EXPLORER-APPSW — FPD-Link Explorer (FLEx)
ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFNP (RUR) | 88 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.