인터페이스 고속 시리얼라이저/디시리얼라이저 FPD-Link 시리얼라이저/디시리얼라이저

DS90UH984-Q1

활성

HDCP를 지원하는 4K FPD-Link IV - 임베디드 DisplayPort™ 브리지 디시리얼라이저

제품 상세 정보

Applications In-vehicle Infotainment (IVI) Input compatibility FPD-Link IV LVDS Function Deserializer Output compatibility DisplayPort/eDP Color depth (bpp) 30 Parallel video bandwidth (per port) (max) (Gbps) 25.9 Serial video bandwidth (per port) (max) (Gbps) 13.1 Features Daisy chain, HDCP, Low-EMI Point-to-Point Communication, Spread-Spectrum Clock (SSC) Generation Signal conditioning Adaptive Equalizer EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
Applications In-vehicle Infotainment (IVI) Input compatibility FPD-Link IV LVDS Function Deserializer Output compatibility DisplayPort/eDP Color depth (bpp) 30 Parallel video bandwidth (per port) (max) (Gbps) 25.9 Serial video bandwidth (per port) (max) (Gbps) 13.1 Features Daisy chain, HDCP, Low-EMI Point-to-Point Communication, Spread-Spectrum Clock (SSC) Generation Signal conditioning Adaptive Equalizer EMI reduction LVDS Diagnostics BIST Rating Automotive Operating temperature range (°C) -40 to 105
VQFNP (RUR) 88 144 mm² (12 mm × 12 mm)
  • DisplayPort (DP) / Embedded DisplayPort (eDP) transmitter
    • VESA DP v1.4a/eDP v1.4b transmitter
    • HBR3/HBR2/HBR/RBR link bit rates
    • Main Link: 1, 2, or 4 lanes
    • Each lane up to 8.1Gbps
    • AUX CH 1Mbps
    • Hot Plug Detect (HPD)
    • Extracts aggregated video streams to local eDP display
    • Designed for 4 K at 60Hz video resolution
    • Stream synchronization and splitting
  • FPD-Link IV interface
    • 13.5/12.528/10.8/6.75/3.375Gbps per channel; Up to 27Gbps over dual channels
    • Coax/STP interconnect support
    • Selectable 1, 2 channels
    • Daisy-chain and splitting
    • Adaptive equalization
  • Ultra-low Latency Control Channel
    • Two fast-mode plus I2C up to 1 MHz (up to 3.4MHz local bus access)
    • High-speed GPIOs
    • Supports SPI and UART pass-through GPIOs
  • Backwards compatibility
    • Integrated HDCP v1.4 with on-chip keys
    • 720p 92x and 1080p/2K 94x FPD-Link III product families
  • Security and diagnostics
    • Voltage and temperature monitoring
    • BIST and pattern generation
    • CRC and error diagnostics
    • ECC on control bits
    • Unique ID for counterfeit protection
  • Advanced link robustness and EMC control
    • Spread Spectrum Clocking Generation (SSCG)
    • Adaptive Receiver Equalization (AEQ)
  • Low power operation
    • 1.8V and 1.15V Dual power supply
  • AEC-Q100 Qualified for automotive applications
    • AEC-Q grade-level 2 , –40°C to 105°C
    • ISO 10605 and IEC 61000-4-2 ESD compliant
  • DisplayPort (DP) / Embedded DisplayPort (eDP) transmitter
    • VESA DP v1.4a/eDP v1.4b transmitter
    • HBR3/HBR2/HBR/RBR link bit rates
    • Main Link: 1, 2, or 4 lanes
    • Each lane up to 8.1Gbps
    • AUX CH 1Mbps
    • Hot Plug Detect (HPD)
    • Extracts aggregated video streams to local eDP display
    • Designed for 4 K at 60Hz video resolution
    • Stream synchronization and splitting
  • FPD-Link IV interface
    • 13.5/12.528/10.8/6.75/3.375Gbps per channel; Up to 27Gbps over dual channels
    • Coax/STP interconnect support
    • Selectable 1, 2 channels
    • Daisy-chain and splitting
    • Adaptive equalization
  • Ultra-low Latency Control Channel
    • Two fast-mode plus I2C up to 1 MHz (up to 3.4MHz local bus access)
    • High-speed GPIOs
    • Supports SPI and UART pass-through GPIOs
  • Backwards compatibility
    • Integrated HDCP v1.4 with on-chip keys
    • 720p 92x and 1080p/2K 94x FPD-Link III product families
  • Security and diagnostics
    • Voltage and temperature monitoring
    • BIST and pattern generation
    • CRC and error diagnostics
    • ECC on control bits
    • Unique ID for counterfeit protection
  • Advanced link robustness and EMC control
    • Spread Spectrum Clocking Generation (SSCG)
    • Adaptive Receiver Equalization (AEQ)
  • Low power operation
    • 1.8V and 1.15V Dual power supply
  • AEC-Q100 Qualified for automotive applications
    • AEC-Q grade-level 2 , –40°C to 105°C
    • ISO 10605 and IEC 61000-4-2 ESD compliant

The DS90UH984-Q1 is an FPD-Link IV to DisplayPort (DP) / Embedded DisplayPort (eDP) bridge device. In conjunction with an FPD-Link IV serializer, the chipset receives a high-speed serialized interface over low-cost 50Ω coax or STP/STQ cables. The DS90UH984-Q1 is a VESA DP v1.4a/eDP v1.4b compatible device that supports advanced features such as HBR3, and SuperFrame formats. The device supports video resolutions of 4K 30-bit color and higher. The FPD-Link IV interface supports video and audio data transmission and full duplex control, including I2C, and GPIO data over the same link. Consolidation of video data and control over FPD-Link IV lanes reduces the interconnect size and weight and simplifies system design. EMI is minimized by the use of low voltage differential signaling, data scrambling, and randomization. In backward compatible FPD-Link III mode, the device supports up to 2K resolutions with 24-bit color depth over a single/dual link as well as HDCP v1.4 support when paired with an HDCP capable serializer.

The DS90UH984-Q1 is an FPD-Link IV to DisplayPort (DP) / Embedded DisplayPort (eDP) bridge device. In conjunction with an FPD-Link IV serializer, the chipset receives a high-speed serialized interface over low-cost 50Ω coax or STP/STQ cables. The DS90UH984-Q1 is a VESA DP v1.4a/eDP v1.4b compatible device that supports advanced features such as HBR3, and SuperFrame formats. The device supports video resolutions of 4K 30-bit color and higher. The FPD-Link IV interface supports video and audio data transmission and full duplex control, including I2C, and GPIO data over the same link. Consolidation of video data and control over FPD-Link IV lanes reduces the interconnect size and weight and simplifies system design. EMI is minimized by the use of low voltage differential signaling, data scrambling, and randomization. In backward compatible FPD-Link III mode, the device supports up to 2K resolutions with 24-bit color depth over a single/dual link as well as HDCP v1.4 support when paired with an HDCP capable serializer.

다운로드 스크립트와 함께 비디오 보기 비디오
추가 정보 요청

전체 데이터시트 및 추가 리소스가 제공됩니다. 지금 요청

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 DS90U H 984-Q1 4K FPD-Link IV to Embedded DisplayPort Bridge Deserializer with HDCP datasheet PDF | HTML 2024. 2. 22

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DS90UH984-Q1EVM — DS90UH984-Q1 FPD-Link IV - 임베디드 DisplayPort 브리지 디시리얼라이저 평가 모듈

DS90Ux984-Q1EVM은 임베디드 DisplayPort 디시리얼라이저에 대한 DS90Ux984-Q1 FPD-Link IV 평가용 평가 모듈(EVM)입니다.  DS90Ux984-Q1은 60Hz에서 픽셀당 30비트로 4K를 포함한 초고화질 해상도를 지원합니다. 출력 DP/eDP 인터페이스는 레인당 최대 8.1Gbps의 속도를 지원하는 임베디드 DisplayPort 및 DisplayPort v1.4와 호환되며, FPD-Link 인터페이스는 FPD-Link IV 모드에서 채널당 최대 13.5Gbps 또는 FPD-Link III (...)
지원되는 제품 및 하드웨어
평가 보드

DS90UH984-Q1MEVM — DS90UH984-Q1 FPD-Link IV - 임베디드 DisplayPort 브리지 디시리얼라이저 평가 모듈

DS90Ux984-Q1MEVM은 임베디드 DisplayPort 디시리얼라이저에 대한 DS90Ux984-Q1 FPD-Link IV 평가용 평가 모듈(EVM)입니다.  DS90Ux984-Q1은 60Hz에서 픽셀당 30비트로 4K를 포함한 초고화질 해상도를 지원합니다. 출력 DP/eDP 인터페이스는 레인당 최대 8.1Gbps의 속도를 지원하는 임베디드 DisplayPort 및 DisplayPort v1.4와 호환되며, FPD-Link 인터페이스는 FPD-Link IV 모드에서 채널당 최대 13.5Gbps 또는 FPD-Link III (...)
지원되는 제품 및 하드웨어
지원 소프트웨어

ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software

ALP Profile Update contains latest fixes and updates to ALP profiles. If you are installing for the first time please install ALP Profile Update after installing ALP Framework.
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFNP (RUR) 88 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상