패키징 정보
| 패키지 | 핀 WQFN (RHU) | 56 |
| 작동 온도 범위(°C) -40 to 85 |
| 패키지 수량 | 캐리어 250 | SMALL T&R |
FPC202의 주요 특징
- Supports control signal management and I2C aggregation across two ports
- Four LED drivers and 12 general-purpose I/Os per port
- General-purpose outputs can be used to drive >4 LEDs per port
- Combine multiple FPC202s to control 28 total ports through a single host interface
- Eliminates need for discrete I2C multiplexers, LED drivers, and high-pin-count FPGA/CPLD control devices
- Reduces PCB routing complexity by handling all low-speed control signals close to the port
- Selectable I2C (up to 1 MHz) or SPI (up to 10 MHz) host control interface
- Automatic pre-fetching of critical, user-specified data from the modules
- Broadcast mode allows writes to all ports simultaneously across all FPC202 controllers
- Advanced LED features for port status indication, including programmable blinking and dimming
- Customizable interrupt events
- Separate host-side I/O voltage: 1.8 V to 3.3 V
- Small QFN package enabling placement on bottom side of PCB underneath ports
FPC202에 대한 설명
The FPC202 dual port controller serves as a low-speed signal aggregator for common port types such as SFP, QSFP, Mini-SAS HD, and others. The FPC202 aggregates all low-speed control and I2C signals across two ports and presents a single easy-to-use management interface to the host (I2C or SPI). Multiple FPC202s can be used in high-port-count applications with one common control interface to the host.
The FPC202 is designed to allow placement on the bottom side of the PCB, underneath the press fit connector, to simplify routing. This localized control of the ports’ low-speed signals cuts system bill of materials (BOM) cost by enabling the use of smaller I/O count control devices (FPGAs, CPLDs, MCUs) and by reducing routing layer congestion.
The FPC202 is compatible with standard SFF-8431, SFF-8436, and SFF-8449 low-speed management interfaces, including a dedicated 100/400-kHz I2C interface to each port. Additional general-purpose pins are available to perform functions such as driving port status LEDs or controlling power switches. The LED drivers have convenience features such as programmable blinking and dimming. The interface to the host controller can operate on a separate supply voltage between 1.8 V and 3.3 V to support low-voltage I/Os.
For each port, the FPC202 has a total of four LED drivers, 12 general-purpose I/Os, and two downstream I2C busses. This expanded set of I/Os allows for control of additional components and features within a system. The general-purpose outputs can be used to drive additional LEDs if more than four are required per port.
The FPC202 can pre-fetch data from user-specified registers in each module, making the data readily accessible to the host through a fast I2C (up to 1 MHz) or SPI (up to 10 MHz) interface. In addition, the FPC202 can trigger an interrupt to the host whenever critical, user-configurable events occur associated with any of the ports under its control. This eliminates the need to continuously poll the modules.