GD75323

활성

+/-7.5V 출력을 지원하는 5V 멀티 채널 120kbps RS-232 라인 드라이버/리시버

지금 주문

데이터 시트

document-pdfAcrobat Multiple RS-232 Drivers And Receivers datasheet (Rev. A) (영어)

GD75323

활성

데이터 시트

지금 주문

제품 상세 정보

Drivers per package

5

Receivers per package

3

Logic voltage (min) (V)

5

Data rate (max) (Mbps)

0.12

Main supply voltage (nom) (V)

5

ESD HBM (kV)

0

Rating

Catalog

Operating temperature range (°C)

0 to 70

Vout (typ) (V)

7.5

Drivers per package

5

Receivers per package

3

Logic voltage (min) (V)

5

Data rate (max) (Mbps)

0.12

Main supply voltage (nom) (V)

5

ESD HBM (kV)

0

Rating

Catalog

Operating temperature range (°C)

0 to 70

Vout (typ) (V)

7.5

SOIC (DW)

20

131.84 mm² 12.8 x 10.3

Single Chip With Easy Interface Between UART and Serial-Port Connector of an External Modem or Other Computer Peripheral
Five Drivers and Three Receivers Meet or Exceed the Requirements of ANSI Standard TIA/EIA-232-F and ITU Recommendation V.28 Standards
Supports Data Rates up to 120 kbit/s
Complement to the GD75232
Provides Pin-to-Pin Replacement for the Goldstar GD75323
Pin-Out Compatible With SN75196
Functional Replacement for the MC145405

Single Chip With Easy Interface Between UART and Serial-Port Connector of an External Modem or Other Computer Peripheral
Five Drivers and Three Receivers Meet or Exceed the Requirements of ANSI Standard TIA/EIA-232-F and ITU Recommendation V.28 Standards
Supports Data Rates up to 120 kbit/s
Complement to the GD75232
Provides Pin-to-Pin Replacement for the Goldstar GD75323
Pin-Out Compatible With SN75196
Functional Replacement for the MC145405

The GD75323 combines five drivers and three receivers from the trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The flow-through design of the GD75323 decreases the part count, reduces the board space required, and allows easy interconnection of the UART and serial-port connector. The all-bipolar circuits and processing of the GD75323 provide a rugged, low-cost solution for this function.

The GD75323 complies with the requirements of the ANSI TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards. These standards are for data interchange between a host computer and a peripheral at signal rates up to 20 kbit/s. The switching speeds of the GD75323 are fast enough to support rates up to 120 kbit/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be assured unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates up to 120 kbit/s, use of ANSI Standard TIA/EIA-423-B and TIA/EIA-422-B and ITU Recommendations V.10 and V.11 are recommended.

The GD75323 is characterized for operation over a temperature range of 0°C to 70°C.

The GD75323 combines five drivers and three receivers from the trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The flow-through design of the GD75323 decreases the part count, reduces the board space required, and allows easy interconnection of the UART and serial-port connector. The all-bipolar circuits and processing of the GD75323 provide a rugged, low-cost solution for this function.

The GD75323 complies with the requirements of the ANSI TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards. These standards are for data interchange between a host computer and a peripheral at signal rates up to 20 kbit/s. The switching speeds of the GD75323 are fast enough to support rates up to 120 kbit/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be assured unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates up to 120 kbit/s, use of ANSI Standard TIA/EIA-423-B and TIA/EIA-422-B and ITU Recommendations V.10 and V.11 are recommended.

The GD75323 is characterized for operation over a temperature range of 0°C to 70°C.

filter

기타 RS-232 트랜시버 찾기

다운로드