INA280-Q1
- AEC-Q100 qualified for automotive
applications:
- Temperature grade 1: –40 °C to +125 °C, TA
- Functional Safety-Capable
- Wide common-mode voltage:
- Operational voltage: 2.7 V to 120 V
- Survival voltage: −20 V to +122 V
- Excellent CMRR:
- 120-dB DC (minimum)
- 85-dB AC at 50 kHz
- Accuracy
- Gain:
- Gain error: ±0.5% (maximum)
- Gain drift: ±20 ppm/°C (maximum)
- Offset:
- Offset voltage: ±150 µV (maximum)
- Offset drift: ±1 µV/°C (maximum)
- Gain:
- Available gains:
- INA280A1-Q1: 20 V/V
- INA280A2-Q1: 50 V/V
- INA280A3-Q1: 100 V/V
- INA280A4-Q1: 200 V/V
- INA280A5-Q1: 500 V/V
- High bandwidth: 1.1 MHz
- Slew rate: 2 V/µs
- Quiescent current: 370 µA
The INA280-Q1 is a current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from 2.7 V to 120 V. It is in a highly space-efficient SC-70 package with a PCB footprint of only 2.0 mm × 2.1 mm. The current measurement accuracy is achieved thanks to the combination of an ultra-low offset voltage of ±150 µV (maximum), a small gain error of ±0.5% (maximum), and a high DC CMRR of 140 dB (typical). The INA280-Q1 is not only designed for DC current measurement, but also for high-speed applications (like fast overcurrent protection, for example) with a high bandwidth of 1.1 MHz (at gain of 20 V/V) and an 85-dB AC CMRR (at 50 kHz).
The INA280-Q1 operates from a single 2.7-V to 20-V supply and draws a 370-µA supply current (typical). The INA280-Q1 available with five gain options: 20 V/V, 50 V/V, 100 V/V, 200 V/V, and 500 V/V. The low offset and drift of the INA280-Q1 enables accurate current sensing over the extended operating temperature range of −40 °C to +125 °C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | INA280-Q1AEC-Q100, 2.7-V to 120-V, 1.1-MHz, High Precision Current Sense Amplifier in Small (SC-70) Package datasheet | PDF | HTML | 2020. 11. 20 | |
| 애플리케이션 노트 | Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A) | PDF | HTML | 2026. 4. 27 | ||
| 애플리케이션 노트 | Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers | PDF | HTML | 2024. 11. 18 | ||
| Application brief | Current Sensing in an H-Bridge (Rev. D) | PDF | HTML | 2023. 4. 7 | ||
| Application brief | High-Side Motor Current Monitoring for Over-Current Protection (Rev. B) | PDF | HTML | 2021. 2. 23 | ||
| 기능 안전 정보 | INA2x0-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2020. 11. 17 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
INA280EVM — INA280 전류 감지 평가 모듈
INA280 평가 모듈(EVM)은 설계자가 분리할 수 있는 완전히 독립적인 보드 5개가 있는 소형 모듈입니다. 최대 120V 공통 모드 및 5A(온 보드 션트) 입력 기능을 가진 INA280의 5가지 게인 변형 각각에 대해 회로도적으로 동일한 보드 5개를 제공합니다.
각 보드는 VS, GND, OUT 및 VIN+와 VIN-의 터미널 블록을 위한 테스트 포인트를 제공합니다. 패드 및 소켓은 입력 및 출력 필터링뿐 아니라 온보드 2512 크기 션트 저항을 신속하게 구현할 수 있습니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool
TIDA-00302 — 과도 안정성을 갖춘 전류 션트 모니터 레퍼런스 디자인
This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it.
Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-SC70 (DCK) | 5 | Ultra Librarian |