INA281
- Wide common-mode voltage:
- Operational voltage: −4 V to +110 V
- Survival voltage: −20 V to +120 V
- Excellent CMRR:
- 120-dB DC CMRR
- 65-dB AC CMRR at 50 kHz
- Accuracy:
- Gain:
- Gain error: ±0.5% (maximum)
- Gain drift: ±20 ppm/°C (maximum)
- Offset:
- Offset voltage: ±55 µV (typical)
- Offset drift: ±0.1 µV/°C (typical)
- Gain:
- Available gains:
- INA281A1, INA281B1 : 20 V/V
- INA281A2, INA281B2 : 50 V/V
- INA281A3, INA281B3 : 100 V/V
- INA281A4, INA281B4 : 200 V/V
- INA281A5, INA281B5 : 500 V/V
- High bandwidth: 1.3 MHz
- Slew rate: 2.5V/µs
- Quiescent current: 1.5 mA
The INA281-Q1 is a high-precision current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from –4 V to 110 V. The negative common-mode voltage allows the device to operate below ground, thus accommodating precise measurement of recirculating currents in half-bridge applications. The combination of a low offset voltage, small gain error and high DC CMRR enables highly accurate current measurement. The INA281-Q1 is not only designed for DC current measurement, but also for high-speed applications (like fast overcurrent protection, for example) with a high bandwidth of 1.3 MHz and an 65-dB AC CMRR (at 50 kHz).
The INA281-Q1 operates from a single 2.7-V to 20-V supply, drawing 1.5 mA of supply current. The INA281-Q1 is available with five gain options: 20 V/V, 50 V/V, 100 V/V, 200 V/V, and 500 V/V. These gain options address wide dynamic range for current-sensing applications.
The INA281-Q1 is specified over an operating temperature range of −40 °C to +125 °C and is offered in a space-saving SOT-23 package with two pin-out variants.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | INA281, –4-V to 110-V, 1.3-MHz Current-Sense Amplifier datasheet (Rev. A) | PDF | HTML | 2023. 11. 14 | ||
| 애플리케이션 노트 | Using a PCB Copper Trace as a Current Sense Shunt Resistor (Rev. A) | PDF | HTML | 2026. 4. 27 | |||
| 애플리케이션 노트 | Risks and Prevention of ESD, EOS, and Latch Up Events for Current Sense Amplifiers | PDF | HTML | 2024. 11. 18 | |||
| Application brief | Current Sensing in Collaborative and Industrial Robotic Arms (Rev. B) | PDF | HTML | 2023. 7. 24 | |||
| Application brief | Current Sensing in an H-Bridge (Rev. D) | PDF | HTML | 2023. 4. 7 | |||
| Application brief | Current Sensing in Mobile Robots | PDF | HTML | 2022. 11. 29 | |||
| Application brief | High-Side Drive, High-Side Solenoid Monitor With PWM Rejection (Rev. D) | PDF | HTML | 2022. 8. 15 | |||
| 인증서 | INA281EVM EU Declaration of Conformity (DoC) | 2020. 7. 1 | ||||
| 기술 문서 | How current sensors help monitor and protect the world’s wireless infrastructure | PDF | HTML | 2019. 12. 30 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
INA281EVM — INA281 -4V~110V, 1.3MHz 전류 감지 증폭기 평가 모듈
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool
TIDA-00302 — 과도 안정성을 갖춘 전류 션트 모니터 레퍼런스 디자인
This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it.
Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |