LMH32404-Q1

활성

통합 멀티플렉싱을 지원하는 차량용 4채널 차동 출력 트랜스임피던스 증폭기

지금 주문하기

데이터 시트

document-pdfAcrobat LMH32404-Q1 Four-Channel, Differential Output, Multiplexed Transimpedance Amplifier With Integrated Clamping and Ambient Light Cancellation datasheet (Rev. A) (영어) PDF | HTML

LMH32404-Q1

활성

데이터 시트

지금 주문하기

제품 상세 정보

Number of channels

4

GBW (typ) (MHz)

350

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

3.45

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Vos (offset voltage at 25°C) (max) (mV)

20

Rail-to-rail

No

Features

Integrated TIA

BW at Acl (MHz)

350

Operating temperature range (°C)

-40 to 125

Rating

Automotive

Number of channels

4

GBW (typ) (MHz)

350

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

3.45

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

3

Vos (offset voltage at 25°C) (max) (mV)

20

Rail-to-rail

No

Features

Integrated TIA

BW at Acl (MHz)

350

Operating temperature range (°C)

-40 to 125

Rating

Automotive

VQFN (RHF)

28

20 mm² (5 mm × 4 mm)

AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T_A
Gain: 20 kΩ
Performance, C_PD = 1 pF:
- Bandwidth: 350 MHz
- Input-referred noise: 56 nA_RMS
- Rise, fall time: 1.25 ns
Quiescent current: 28 mA/channel
Standby mode: 10 mA/channel
Low power mode: 2.5 mA (4 channels)
Channel switching time: 10 ns
Integrated ambient light cancellation
Integrated 100-mA protection clamp
4 Input channels and 4 differential output channels
Integrated multiplexer enables flexible configurability between optical sensor and ADC/TDC
Multiple LMH32404s can be combined in parallel to create a wider field-of-view (FoV)

AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, T_A
Gain: 20 kΩ
Performance, C_PD = 1 pF:
- Bandwidth: 350 MHz
- Input-referred noise: 56 nA_RMS
- Rise, fall time: 1.25 ns
Quiescent current: 28 mA/channel
Standby mode: 10 mA/channel
Low power mode: 2.5 mA (4 channels)
Channel switching time: 10 ns
Integrated ambient light cancellation
Integrated 100-mA protection clamp
4 Input channels and 4 differential output channels
Integrated multiplexer enables flexible configurability between optical sensor and ADC/TDC
Multiple LMH32404s can be combined in parallel to create a wider field-of-view (FoV)

The LMH32404-Q1 is a quad-channel, single-ended-input to differential-output transimpedance amplifier (TIA) for light detection and ranging (LIDAR) applications and laser distance measurement systems.

The LMH32404-Q1 has an integrated 100-mA clamp on each channel that protects the amplifier and allows the device to recover rapidly from an overloaded input condition. The LMH32404-Q1 also features an integrated ambient light cancellation (ALC) circuit on each channel that can be used instead of AC coupling between the photodiode and the amplifier to save board space and system cost. The ALC loop should be disabled when DC and low frequency content is measured.

Each LMH32404-Q1 channel has integrated switches on the output to disconnect the differential output amplifier from the output pins and put the channel in standby mode. When switching between different channels, the transistion time is only 10 ns. The LMH32404-Q1 can be placed in low-power mode using the EN pin to conserve power when the amplifier is not being used.

.

The LMH32404-Q1 is a quad-channel, single-ended-input to differential-output transimpedance amplifier (TIA) for light detection and ranging (LIDAR) applications and laser distance measurement systems.

The LMH32404-Q1 has an integrated 100-mA clamp on each channel that protects the amplifier and allows the device to recover rapidly from an overloaded input condition. The LMH32404-Q1 also features an integrated ambient light cancellation (ALC) circuit on each channel that can be used instead of AC coupling between the photodiode and the amplifier to save board space and system cost. The ALC loop should be disabled when DC and low frequency content is measured.

Each LMH32404-Q1 channel has integrated switches on the output to disconnect the differential output amplifier from the output pins and put the channel in standby mode. When switching between different channels, the transistion time is only 10 ns. The LMH32404-Q1 can be placed in low-power mode using the EN pin to conserve power when the amplifier is not being used.

.

filter

기타 트랜스임피던스 증폭기 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new

대안 비교

비교 대상 장치와 유사한 기능.

LMH32401

활성

프로그래머블 게인 차동 출력 고속 트랜스임피던스 증폭기 A single-channel transimpedance amplifier with programable gain for smaller systems requiring different gain options

LMH32401-Q1

활성

오토모티브, 프로그래머블 게인 차동 출력 고속 트랜스임피던스 증폭기 Single channel with programable gain for smaller systems requiring different gain options

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

3개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	데이터 시트	LMH32404-Q1 Four-Channel, Differential Output, Multiplexed Transimpedance Amplifier With Integrated Clamping and Ambient Light Cancellation datasheet (Rev. A)	PDF \| HTML	2021. 11. 1
	Application brief	Time of Flight and LIDAR - Optical Front End Design (Rev. A)	PDF \| HTML	2022. 4. 29
	애플리케이션 노트	How to Increase the Channel Density of LiDAR Systems with the 4-Channel LMH32404	PDF \| HTML	2021. 5. 7

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LMH32404RHFEVM — 250MHz, 쿼드 채널, 차동 출력 트랜스임피던스 증폭기 평가 모듈

LMH32404RHFEVM은 LMH32404RHF 차동 출력 트랜스임피던스 증폭기용 평가 모듈(EVM)입니다. 이 EVM에는 출력을 50Ω 단일 종단 연결로 변환하는 변압기가 있어 표준 테스트 장비를 사용하여 쉽게 측정할 수 있으며, 완전 차동 DC 결합 신호로 변환하는 옵션이 있습니다. 입력은 기본적으로 50Ω 정합되고 2kΩ 저항을 통해 전류로 변환되는 전압 입력을 수신하도록 구성되지만, 보드 뒷면의 포토다이오드 바이어스 연결(옵션)을 통해 실제 전류 입력을 수신하도록 재구성할 수 있습니다. 이 EVM에는 장치 게인, 입력 (...)

사용 설명서: PDF | HTML

지원되는 제품 및 하드웨어

재고 있음

제한:

주문하려면 로그인

lock

재고를 보려면 로그인

??asset.out-of-stock-ti_ko_KR??

이용할 수 없음

시뮬레이션 모델