LMX2594
- 10-MHz to 15-GHz output frequency
- –110 dBc/Hz phase noise at 100-kHz offset with 15-GHz carrier
- 45-fs rms jitter at 7.5 GHz (100 Hz to 100 MHz)
- Programmable output power
- PLL key
specifications
- Figure of merit: –236 dBc/Hz
- Normalized 1/f noise: –129 dBc/Hz
- High phase detector frequency
- 400-MHz integer mode
- 300-MHz fractional mode
- 32-bit fractional-N divider
- Remove integer boundary spurs with programmable input multiplier
- Synchronization of output phase across multiple devices
- Support for SYSREF with 9-ps resolution programmable delay
- Frequency ramp and chirp generation ability for FMCW applications
- < 20-µs VCO calibration speed
- 3.3-V single power supply operation
The LMX2594 is a high-performance, wideband synthesizer that can generate any frequency from 10 MHz to 15 GHz without using an internal doubler, thus eliminating the need for sub-harmonic filters. The high-performance PLL with figure of merit of –236 dBc/Hz and high-phase detector frequency can attain very low in-band noise and integrated jitter. The high-speed N-divider has no pre-divider, thus significantly reducing the amplitude and number of spurs. There is also a programmable input multiplier to mitigate integer boundary spurs.
The LMX2594 allows users to synchronize the output of multiple devices and also enables applications that need deterministic delay between input and output. A frequency ramp generator can synthesize up to two segments of ramp in an automatic ramp generation option or a manual option for maximum flexibility. The fast calibration algorithm allows changing frequencies faster than 20 µs. The LMX2594 adds support for generating or repeating SYSREF (compliant to JESD204B standard) designed for low-noise clock sources in high-speed data converters. A fine delay adjustment (9-ps resolution) is provided in this configuration to account for delay differences of board traces.
The output drivers within LMX2594 deliver output power as high as 7 dBm at 15-GHz carrier frequency. The device runs from a single 3.3-V supply and has integrated LDOs that eliminate the need for on-board low noise LDOs.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADC08DJ5200RFEVM — 듀얼 5.2GSPS 또는 싱글 10.4GSPS를 지원하는 RF 샘플링 8비트 ADC용 ADC08DJ5200RF 평가 모듈
ADC08DJ5200RF 평가 모듈(EVM)은 ADC08DJ5200RF를 평가하기 위한 플랫폼입니다. ADC08DJ5200RF는 버퍼링된 아날로그 입력 및 통합 디지털 다운컨버터를 지원하는 저전력, 8비트, 듀얼 채널 5.2GSPS 또는 싱글 채널 10.4GSPS, RF 샘플링 아날로그-디지털 컨버터(ADC)로, JESD204B/C 인터페이스를 지원합니다. EVM에는 광범위한 신호 소스 및 주파수를 수용할 수 있는 트랜스포머 커플 아날로그 입력이 있습니다.
LMX2594 클록 신서사이저와 LMK04828 JESD204B/C 클록 (...)
ADC12DJ4000RFEVM — ADC12DJ4000RF - 4GSPS 듀얼 또는 8GSPS 단일 채널, RF 샘플링, 12비트 ADC용 평가 모듈
LMX2594EVM — LMX2594EVM 위상 동기화 및 JESD204B를 지원하는 15GHz 광대역 RF 신시사이저 평가 모듈
LMX2594EVM EVM(평가 모듈)은 LMX2594 개발을 위한 플랫폼입니다. LMX2594는 업계 최초의 통합형 VCO(전압 제어 오실레이터)를 포함한 PLL이며 최고 15GHz의 기본 VCO 출력을 얻을 수 있습니다. 업계 최고의 PLL FOM(Figure of Merit)은 -129dBc/Hz의 1/f를 지원하는 -236dBc/Hz입니다. 이 장치는 JESD204B 표준을 지원하기 때문에(SYSREF 신호를 생성 또는 반복할 수 있음) 고속 데이터 컨버터를 클록하는 데 이상적입니다. EVM 측정의 통합 지터는 9GHz (...)
LMX2594PSEVM — 다중 장치 위상 동기화를 지원하는 15GHz RF 신시사이저용 LMX2594 평가 모듈
LMX2594 평가 모듈(EVM)은 LMX2594 광대역 RF 신시사이저의 PS(위상 동기화) 기능 평가용 플랫폼입니다. LMX2594PSEVM에는 동일한 레퍼런스 클록을 공유하는 LMX2594 부품 2개가 포함되어 있습니다.
위상 동기화 이후 부품의 출력 위상을 측정 및 비교할 수 있습니다. 또한 EVM에는 위상 동기화 출력 2개를 단일 출력으로 결합해 위상 잡음을 줄이는 데 사용할 수 있는 RF(무선 주파수) 전력 컴바이너가 포함되어 있습니다.
XMICR-3P-LMX2594 — LMX2594 X-MWblock 평가 모듈
X-MWblocks consist of RF and Microwave “Drop-In” components that can be used individually for prototyping or in production assemblies. X-MWblocks are easy to test, integrate, align, and configure to 60 GHz and beyond. No messy Sweat Soldering or Silver Epoxy processes are required. X-MWblocks are (...)
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
텍사스 인스트루먼트 클록 및 신시사이저(TICS) Pro 소프트웨어는 다음 접두사를 사용하여 제품 번호의 평가 모듈(EVM)을 프로그래밍하는 데 사용됩니다. CDC, LMK 및 LMX. 이러한 제품에는 위상 동기 루프 및 전압 제어 오실레이터(PLL+VCO), 신시사이저 및 클로킹 디바이스가 포함되어 있습니다.
CLOCK-TREE-ARCHITECT — 클록 트리 아키텍트 프로그래밍 소프트웨어
클록 트리 아키텍트는 시스템 요구 사항에 따라 클록 트리 솔루션을 생성하여 설계 프로세스를 간소화하는 클록 트리 합성 툴입니다. 이 툴은 광범위한 클로킹 제품 데이터베이스에서 데이터를 가져와 시스템 수준의 다중 칩 클로킹 솔루션을 생성합니다.
PLLATINUMSIM-SW — PLL 루프 필터, 위상 잡음, 잠금 시간, 스퍼 시뮬레이션 툴
PLLATINUMSIM-SW는 사용자가 LMX 계열의 위상 고정 루프(PLL) 및 신시사이저를 포함하는 PLLatinum™ 집적 회로의 상세한 설계 및 시뮬레이션을 만들 수 있는 시뮬레이션 툴입니다.
많은 TI 레퍼런스 설계에는 LMX2594이(가) 포함됩니다.
레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHA) | 40 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.