XMICR-3P-LMX2594
개요
X-MWblocks consist of RF and Microwave “Drop-In” components that can be used individually for prototyping or in production assemblies. X-MWblocks are easy to test, integrate, align, and configure to 60 GHz and beyond. No messy Sweat Soldering or Silver Epoxy processes are required. X-MWblocks are highly characterized with S-Parameter models and connect with a patented solder-less interconnect technology.
This X-MWblock incorporates the LMX2594. The LMX2594 is a 15-GHz wideband PLLatinum™ RF synthesizer with phase synchronization and JESD204B support.
RF PLL 및 신시사이저
주문 및 개발 시작
XM-A724-0609D — Phase lock loops with Int VCO
XM-A724-0609D — Phase lock loops with Int VCO
PLLATINUMSIM-SW — PLL 루프 필터, 위상 잡음, 잠금 시간, 스퍼 시뮬레이션 툴
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
오실레이터
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
PLLATINUMSIM-SW — PLL 루프 필터, 위상 잡음, 잠금 시간, 스퍼 시뮬레이션 툴
PLLatinum Sim 1.6.9.1 installer binary for Windows operating system
제품
RF PLL 및 신시사이저
오실레이터
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
문서
PLLatinum Sim 1.6.9.1 software manifest
출시 정보
PLLatinum Sim 1.6.9.1 is a bugfix release to 1.6.9.
새 소식
- Fix phase noise trace load initial point scaling up from 0dBc - the initial value should now be correct
- Fix phase noise modeling for devices with VCO post-divider
- Improvements to spur modeling
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
지원되는 제품 및 하드웨어
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
TICSPRO-SW — TICS Pro GUI and Live Programming Tool for Clocking Devices
TICS Pro 1.7.10.1 installer binary for Windows operating system
제품
RF PLL 및 신시사이저
오실레이터
클록 네트워크 싱크로나이저
클록 버퍼
클록 생성기
클록 지터 클리너
하드웨어 개발
평가 보드
문서
TICS Pro 1.7.10.1 Software Manifest
TICS Pro 1.7.10.1 Release Notes
출시 정보
v1.7.10.1 contains a bugfix for ReadAllRegisters API introduced in v1.7.10.0, and replaces v1.7.10.0.
Devices
- Added LMK5D33414
Improvements
- See release notes for complete list of updates
- APIs for GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro added
- ReadAllRegisters API returns values
Bugfixes
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
Known Issues
- LMK5B and LMK5C family - In some cases, "Assign Selected VCO Settings to Device" and "Apply Output Clock Settings to Device" may need to be pressed twice for certain cascaded configurations to display correctly
- LMK05318 - In some cases, it is necessary to press "Calculate Frequency Plan" twice for correct VCO2 frequency. This issue is resolved in LMK05318B GUI.
- Burst mode page looping requires long delays to halt, and halting may crash the GUI. If possible, do not loop in burst mode.
- User Controls page can sometimes become desynchronized from Raw Registers and other pages. Refer to Raw Registers or other pages for correct values. Saving/Loading and Import/Export of register data is unaffected, and register data will still be written to and read from connected devices correctly.
새 소식
- Added new APIs: GetAllRegisters, GetTableData, ImportRegisters, ExportRegisters, and CloseTICSPro
- ReadAllRegisters API returns values
- Reading all registers in Simulation/DemoMode no longer overwrites registers with zeros
- ti_ticspro library TICSProOptions.FromFile method fixed
- Added LMK5D33414
관련 설계 리소스
하드웨어 개발
평가 보드
소프트웨어 개발
애플리케이션 소프트웨어 및 프레임워크
지원 및 교육
비디오 시리즈
모든 비디오 보기고지 사항
위의 특정 정보 및 리소스(비-TI 사이트 링크 포함)는 타사 파트너가 제공할 수 있으며 편의를 위해 여기에 포함되어 있습니다. TI는 이러한 정보 및 리소스의 콘텐츠를 제공할 책임이 없으며, 의도한 용도 및 사용자를 대신하여 신중하게 평가해야 합니다. 이러한 정보 및 리소스를 여기에 포함한다는 것은 TI가 타사를 보증한다는 의미가 아니며, 타사 제품 또는 서비스의 적합성과 관련된 보증이나 표현으로 해석해서는 안 됩니다.