LSF0102

활성

듀얼 양방향 멀티 전압 레벨 변환기

제품 상세 정보

Bits (#) 2 Data rate (max) (Mbps) 200 Topology Open drain, Push-Pull Direction control (typ) Auto-direction Vin (min) (V) 0.95 Vin (max) (V) 4.9 Vout (min) (V) 1.8 Vout (max) (V) 5.5 Applications GPIO, I2C, MDIO, SMBus, UART Features Output enable Prop delay (ns) 1.2 Technology family LSF Supply current (max) (mA) 0.0015 Rating Catalog Operating temperature range (°C) -40 to 125
Bits (#) 2 Data rate (max) (Mbps) 200 Topology Open drain, Push-Pull Direction control (typ) Auto-direction Vin (min) (V) 0.95 Vin (max) (V) 4.9 Vout (min) (V) 1.8 Vout (max) (V) 5.5 Applications GPIO, I2C, MDIO, SMBus, UART Features Output enable Prop delay (ns) 1.2 Technology family LSF Supply current (max) (mA) 0.0015 Rating Catalog Operating temperature range (°C) -40 to 125
DSBGA (YZT) 8 1.9404 mm² 1.98 x 0.98 SOT-23-THN (DDF) 8 8.12 mm² 2.9 x 2.8 SSOP (DCT) 8 11.8 mm² 2.95 x 4 VSSOP (DCU) 8 6.2 mm² 2 x 3.1 X2SON (DQE) 8 1.4 mm² 1.4 x 1 X2SON (DTM) 8 1.08 mm² 0.8 x 1.35
  • Provides bidirectional voltage translation with no direction pin
  • Supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up To 40MHz up or down translation at 50pF capacitive load
  • Allows bidirectional voltage-level translation between
    • 0.95V ↔ 1.8/2.5/3.3/5V
    • 1.2V ↔ 1.8/2.5/3.3/5V
    • 1.8V ↔ 2.5/3.3/5V
    • 2.5V ↔ 3.3/5V
    • 3.3V ↔ 5V
  • Low standby current
  • 5V tolerance I/O port to support TTL
  • Low RON provides less signal distortion
  • High-impedance I/O pins for EN = Low
  • Flow-through pinout for easy PCB trace routing
  • Latch-up performance >100mA per JESD 17
  • –40°C to 125°C operating temperature range
  • Provides bidirectional voltage translation with no direction pin
  • Supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up To 40MHz up or down translation at 50pF capacitive load
  • Allows bidirectional voltage-level translation between
    • 0.95V ↔ 1.8/2.5/3.3/5V
    • 1.2V ↔ 1.8/2.5/3.3/5V
    • 1.8V ↔ 2.5/3.3/5V
    • 2.5V ↔ 3.3/5V
    • 3.3V ↔ 5V
  • Low standby current
  • 5V tolerance I/O port to support TTL
  • Low RON provides less signal distortion
  • High-impedance I/O pins for EN = Low
  • Flow-through pinout for easy PCB trace routing
  • Latch-up performance >100mA per JESD 17
  • –40°C to 125°C operating temperature range

The LSF family of devices supports bidirectional voltage translation without the need for DIR pin which minimizes system effort (for PMBus, I2C, SMBus, and so forth). The LSF family of devices supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up to 40MHz up or down translation at 50pF capacitive load which allows the LSF family to support more consumer or telecom interfaces (MDIO or SDIO).

LSF family supports 5V tolerance on I/O port which makes it compatible with TTL levels in industrial and telecom applications. The LSF family is able to set up different voltage translation levels which makes it very flexible.

The LSF family of devices supports bidirectional voltage translation without the need for DIR pin which minimizes system effort (for PMBus, I2C, SMBus, and so forth). The LSF family of devices supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up to 40MHz up or down translation at 50pF capacitive load which allows the LSF family to support more consumer or telecom interfaces (MDIO or SDIO).

LSF family supports 5V tolerance on I/O port which makes it compatible with TTL levels in industrial and telecom applications. The LSF family is able to set up different voltage translation levels which makes it very flexible.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
21개 모두 보기
유형 직함 날짜
* Data sheet LSF0102 2 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Applications datasheet (Rev. B) PDF | HTML 2024/04/11
Application brief Enabling AI Accelerators with Voltage Level Translation and Analog Multiplexing (Rev. A) PDF | HTML 2025/09/29
Application note Top Questions About Auto Bi-Direction LSF Family Translators PDF | HTML 2024/12/26
Application note Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators PDF | HTML 2024/07/12
Application note Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 2024/07/03
Application brief Integrated vs. Discrete Open Drain Level Translation PDF | HTML 2024/01/09
Application brief Future-Proofing Your Level Shifter Design with TI's Dual Footprint Packages PDF | HTML 2023/09/05
Product overview Enabling System on Module Industrial PC Connectivity With Level Translation PDF | HTML 2023/04/03
Application brief Enabling Next Generation Processors, FPGA, and ASSP with Voltage Level Translat PDF | HTML 2023/01/17
Application brief Enabling Smart Solar Inverter Designs with Level Translation PDF | HTML 2022/10/31
Product overview Translate Voltages for I2C for PCA9306 LSF0102 TXS0102 PDF | HTML 2022/09/14
Product overview Translate Voltages for I2C PDF | HTML 2022/06/02
Selection guide Voltage Translation Buying Guide (Rev. A) 2021/04/15
Technical article Enabling smart meter wireless connectivity with level translation PDF | HTML 2019/10/23
Application note Factors Affecting VOL for TXS and LSF Auto-bidirectional Translation Devices 2017/11/19
Application note Biasing Requirements for TXS, TXB, and LSF Auto-Bidirectional Translators 2017/10/30
Selection guide Logic Guide (Rev. AB) 2017/06/12
Application note Voltage Translation Between 3.3-V, 2.5-V, 1.8-V, and 1.5-V Logic Standards (Rev. B) 2015/04/30
Application note Voltage-Level Translation With the LSF Family (Rev. B) 2015/03/12
Application note Selecting the Right Level Translation Solution (Rev. A) 2004/06/22
Selection guide Logic Guide (Rev. AC) PDF | HTML 1994/06/01

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

5-8-LOGIC-EVM — 5핀~8핀 DCK, DCT, DCU, DRL 및 DBV 패키지용 일반 논리 평가 모듈

5~8핀 수의 DCK, DCT, DCU, DRL 또는 DBV 패키지가 있는 모든 디바이스를 지원하도록 설계된 유연한 EVM.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LSF-EVM — 1~8비트 LSF 변환기 제품군 평가 모듈

LSF 장치 제품군은 0.95V 및 5V의 전압 범위를 지원하고 방향 핀 없이 다중 전압 양방향 변환을 제공하는 레벨 변환기입니다.

LSF-EVM은 LSF0108PWR 장치로 채워져 있으며 LSF0101DRYR, LSF0102DCTR 및 LSF0204PWR 장치와 호환되는 랜딩 패턴이 있습니다.

LSF-EVM은 100MHz 이상의 데이터 속도에 대한 반사를 줄여 고속 변환에 최적화됩니다. 또한 보드의 설계를 사용하면 여러 연결 인터페이스를 사용할 수 있고 점퍼 연결을 통해 쉽게 연결하거나 분리할 수 있는 풀업이 채워져 있어 간단한 (...)

사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

LSF0102 IBIS Model

SDLM023.ZIP (56 KB) - IBIS Model
레퍼런스 디자인

TIDA-01012 — 무선 IoT, Bluetooth® 저에너지, 4½ 자리, 100khz True RMS 디지털 멀티미터

현재 디지털 멀티미터(DMM)와 같은 테스트 장비를 포함한 많은 제품이 사물 인터넷(IoT)을 통해 연결되고 있습니다.  텍사스 인스트루먼트의 SimpleLink™ 초저전력 무선 마이크로컨트롤러(MCU) 플랫폼으로 지원되는 TIDA-01012 레퍼런스 설계는 Bluetooth® 저에너지 연결을 지원하는 연결형 4½자리, 100kHz true RMS, DMM, NFC Bluetooth 페어링 및 TI의 CapTIvate™ 기술을 사용하여 지원하는 자동 웨이크업 기능을 보여줍니다.

 
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01014 — 저전력 산업용 IoT 필드 측정을 위한 고정밀 배터리 연료 게이지 레퍼런스 디자인

IoT(사물 인터넷) 혁신은 애플리케이션과 기기를 효율적으로 연결하여 배터리로 구동되는 광범위한 초저전력 센서 배포를 가능하게 했습니다.  TI의 첨단 센서 및 저전력 연결 장치와 같은 새로운 기술을 통해 배터리 구동 무선 시스템으로 이러한 기기를 설계할 수 있어 비용, 배포, 안정성, 성능 및 복잡성이 획기적으로 개선되고 있습니다.

텍사스 인스트루먼트의 SimpleLink™ 초저전력 무선 MCU(마이크로컨트롤러) 플랫폼을 사용하는 TIDA-01014 레퍼런스 설계는 TIDA-01012 무선 DMM 레퍼런스 설계를 활용하며, (...)

Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YZT) 8 Ultra Librarian
SOT-23-THN (DDF) 8 Ultra Librarian
SSOP (DCT) 8 Ultra Librarian
VSSOP (DCU) 8 Ultra Librarian
X2SON (DQE) 8 Ultra Librarian
X2SON (DTM) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상