OPA1S2384
- Wide Bandwidth: 250 MHz
- High Slew Rate: 150 V/µs
- Rail-to-Rail Input/Output (I/O)
- Fast Settling
- Low Input Bias Current: 3 pA
- High Input Impedance: 1013 Ω || 2 pF
- SPST Switch:
- Low On-Resistance: 4 Ω
- Low Charge Injection: 1 pC
- Low Leakage Current: 10 pA
- Flexible Configuration:
- Transimpedance Gain
- External Hold Capacitor
- Post-Gain
- Single Supply: +2.7 V to +5.5 V
- Quiescent Current: 9.2 mA
- Small Package: 3-mm × 3-mm SON-10
- OPA1S2384: Internal Switch Active High
- OPA1S2385: Internal Switch Active Low
The OPA1S2384 and OPA1S2385 (OPA1S238x) combine high bandwidth, FET-input operational amplifiers with a fast SPST CMOS switch designed for applications that require the tracking and capturing of fast signals.
By providing a 250-MHz gain bandwidth product and rail-to-rail input/output swings in single-supply operation, the OPA1S238x is capable of wideband transimpedance gain and large output signal swing simultaneously. Low input bias current and voltage noise (6 nV/√Hz) make it possible to amplify extremely low-level input signals for maximum signal-to-noise ratio.
The characteristics of the OPA1S238x make this device ideally suited for use as a wideband photodiode amplifier.
In addition, the CMOS switch and subsequent buffer amplifier allow the OPA1S238x to be easily configured as a fast sample-and-hold circuit. The external hold capacitor and post-gain options make the OPA1S238x easily adoptable to a wide range of speed and accuracy requirements. Note that the OPA1S2384 closes the internal switch with a logic-high signal, and the OPA1S2385 closes the internal switch with a logic-low signal.
The OPA1S238x are optimized for low-voltage operation from as low as +2.7 V up to +5.5 V. These devices are specified for a temperature range of –40°C to +85°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | 250-MHz, CMOS Transimpedance Amplifier (TIA) with Integrated Switch and Buffer datasheet (Rev. A) | 2013. 6. 24 | ||
| e북 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017. 3. 28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
OPA1S2384EVM — OPA1S2384EVM - 스위치 및 버퍼가 통합된 트랜스임피던스 증폭기용 평가 모듈
The OPA1S2384EVM (evaluation module) is intended to provide basic functional evaluation of the OPA1S2384, CMOS Transimpedance Amplifier (TIA) with Integrated Switch and Buffer.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSON (DRC) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.