OPA2985
48V, precision, low-noise, wide-bandwidth, rail-to-rail input and output, CMOS op amps
OPA2985
- Wide power-supply range:
- 4.5V to 48V (±2.25V to ±24V)
- Low input offset voltage drift: 1.2µV/°C, max
- Low input offset voltage: 50µV, max
- Low input bias current: 10pA, max
- Low noise: 9nV/√Hz
- Low power consumption: 800µA, max
- Gain bandwidth: 5.6MHz
- High slew rate: 15V/µs
- Mux-Friendly inputs
- Rail-to-rail input and output
- Output current drive: +42/−50mA
- Wide temperature range: –40°C to +125°C
The OPA985, OPA2985, and OPA4985 (OPAx985) are next generation operational amplifiers (op amps) that are 48V capable, and are equipped with dual temperature e-Trim™ to achieve very high precision. The OPAx985 are pin compatible replacement with many legacy amplifiers that can benefit from a higher operating voltage and improved performance.
The OPAx985 feature novel design techniques to achieve excellent ac and dc performance. These op amps offer very low offset (50µV, max) and offset drift (1.2µV/°C, max).
The high common-mode rejection (CMRR) and power-supply rejection (PSRR) ratios help maintain precision across a variety of different operating conditions. With only 800µA (max) of supply current, the OPAx985 provides 9nV/√Hz of voltage noise and 5.6MHz of gain bandwidth.
The OPAx985 excel in a wide range of precision applications. The high input impedance, rail-to-rail input and output, mux-friendly input architecture, and wide operating voltage range makes these devices easy to design in. The combination of features make the OPAx985 an excellent choice for analog input module, common-redundant power supply (CRPS), and lab instrumentation applications. Low power consumption and industry-standard small packages allow the device to be used in high-density systems that are size constrained, while reducing the thermal management requirements for the system.
The OPAx985 are available in industry-standard packages and operate across the temperature range of –40°C to +125°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPAx985 48V, High Precision (1.2µV/°C), Low-Power (750μA), Low Noise (9nV√ Hz ) CMOS Op Amps datasheet | PDF | HTML | 2026. 11. 11 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈
증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.
AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.
- D(SOIC-8 및 SOIC-14)
- PW(TSSOP-14)
- DGK(VSSOP-8)
- (...)
DIYAMP-EVM — 범용 DIY(Do-it-yourself) 증폭기 회로 평가 모듈
DIYAMP-EVM은 엔지니어와 DIY 사용자에게 실제 증폭기 회로를 제공하여 설계 개념을 신속하게 평가하고 시뮬레이션을 검증할 수 있게 해주는 EVM(평가 모듈) 제품군입니다. 3가지 업계 표준 패키지(SC70, SOT-23, SOIC)로 제공되며 12가지 대중적인 증폭기 구성을 포함합니다. 예를 들어 증폭기, 필터, 안정성 보상 및 콤퍼레이터 구성이 있어 단일 및 이중 공급 장치 양쪽 모두에 적합합니다.
DIYAMP-EVM은 빠르고 간편한 프로토타이핑을 지원하며 일반적인 0805 또는 0603 표면 실장 부품을 사용합니다. (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |