OPA620
- Unity-gain bandwidth: 250MHz
- Wide bandwidth: 100MHz GBW
- High precision:
- Input offset voltage at 25℃ : ±300µV (maximum)
- Input offset voltage (-40℃ to 125℃) : ±1mV (maximum)
- Offset drift: 1.2µV/°C (typical)
- High slew rate: 190V/µs
- Low noise: 5.5nV/√Hz
- Rail-to-rail I/O
- High output current: > 100mA
- Low input bias current: 3pA
- Quiescent current: 5.1mA
- Thermal shutdown
- Shutdown IQ < 6µA
- Supply range: 2.5V to 5.5V
The single OPAx620 is a high-speed, voltage-feedback operational amplifier designed for current sensing and precision applications. Offering unity-gain stability and high output current drive, the OPAx620 delivers enhanced signal-chain precision across temperature, exceeding the performance of conventional wide-bandwidth CMOS amplifiers. Operating with a low quiescent current of 5.1mA per channel, the OPAx620 is suitable for power-sensitive applications.
The OPAx620 operates from a single or dual supply voltage ranging from 2.5V (±1.25V) to 5.5V (±2.75V). It features a wide common-mode input range extending beyond the supply rails, and delivers a rail-to-rail output swing within 30mV of the positive and negative supplies, enabling a wide dynamic range.
The OPAx620 is available in a small 5-pin SOT-23 package and is specified for operation over an extended temperature range of –40°C to +125°C.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPAx620 250MHz, Precision, Rail-to-Rail I/O, CMOS Operational Amplifier datasheet (Rev. A) | PDF | HTML | 2026. 6. 24 | |
| Application brief | High Speed Current Sensing for Data Center mCRPS Standards | PDF | HTML | 2026. 4. 7 | ||
| e북 | An Engineer's Guide to Current Sensing (Rev. B) | 2022. 4. 12 | |||
| Circuit design | Discrete Wide Bandwidth INA Circuit (Rev. A) | PDF | HTML | 2020. 12. 23 | ||
| Application brief | Increase Measurement Accuracy With HS Amps for Low-Side Shunt Current Monitoring (Rev. A) | 2019. 8. 26 | |||
| e북 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017. 3. 28 | ||
| 사용 설명서 | DEM-OPA-SO-1A User's Guide (Rev. B) | 2012. 4. 12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-OPA-SOT-1A — SOT-23 5핀 및 6핀 패키지용 단일 연산 증폭기 평가 모듈
DEM-OPA-SOT-1A는 고속 광대역 연산 증폭기의 작동 및 성능을 평가하는 데모 보드입니다. 채워지지 않은 이 PC 보드는 소형 아웃라인 트랜지스터(SOT) DBV 패키지로 제공되는 제품과 호환됩니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |