OPA698
- High linearity near limiting
- Fast recovery from overdrive: 1ns
- Limiting voltage accuracy: ±5mV
- –3db bandwidth (g = +1): 650MHz
- Gain bandwidth product: 300MHz
- Slew rate: 1800V/µs
- ±5V and +5V supply operation
- High-gain version available: OPA699
The OPA698 is a wide-band, unity-gain stable voltage-feedback op amp that offers bipolar output voltage limiting. Two buffered limiting voltages take control of the output when attempting to drive beyond these limits. This new output limiting architecture holds the limiter offset error to ±5mV.
The op amp operates linearly to within 20mV of the output limit voltages. The combination of a narrow nonlinear range and the low limiting offset allows the limiting voltages to be set within 100mV of the desired linear output range. A fast 1ns recovery from limiting provides overdrive signals that are transparent to the signal channel. Implementing the limiting function at the output, as opposed to the input, gives the specified limiting accuracy for any gain, and allows the OPA698 to be used in all standard op-amp applications.
Nonlinear analog signal processing benefits from the ability of the OPA698 to sharply transition from linear operation to output limiting. The quick recovery time supports high-speed applications.
The OPA698 is available in an industry-standard pin-out SOIC-8 package. For higher gain, or transimpedance applications that require output limiting with fast recovery, consider the OPA699.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPA698 Unity-Gain Stable, Wideband Voltage Limiting Amplifier datasheet (Rev. E) | PDF | HTML | 2025. 4. 10 | |
| e북 | The Signal e-book: A compendium of blog posts on op amp design topics | PDF | HTML | 2017. 3. 28 | ||
| 애플리케이션 노트 | RLC Filter Design for ADC Interface Applications (Rev. A) | 2015. 5. 13 | |||
| 애플리케이션 노트 | ADC Input Protection | 2013. 9. 4 | |||
| 애플리케이션 노트 | Video Designs Using High-Speed Amplifiers (Rev. A) | 2005. 2. 3 | |||
| 애플리케이션 노트 | Noise Analysis for High Speed Op Amps (Rev. A) | 2005. 1. 17 | |||
| 애플리케이션 노트 | ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers | 2004. 4. 22 | |||
| 애플리케이션 노트 | Measuring Board Parasitics in High-Speed Analog Design | 2003. 7. 7 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-OPA-SO-1A — SO-8 패키지용 단일 연산 증폭기 평가 모듈
The DEM-OPA-SO-1A demonstration fixture helps designers evaluate the operation and performance of TI's High Speed, Wide Bandwidth Operational Amplifiers. This unpopulated PC board is compatible with products offered in the 8-lead SOIC (D) package.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |