OPA828
- Low input voltage noise density: 4 nV/√Hz at 1 kHz
- Input voltage noise: 0.1 Hz to 10 Hz: 60 nVRMS
- Low input bias current:
- 0.1 pA (DGN)
- 1 pA (D)
- Input offset voltage:
- 25 µV (DGN)
- 50 µV (D)
- Input offset drift:
- 0.2 µV/°C (DGN)
- 0.45 µV/°C (D)
- MUX-friendly inputs
- Gain bandwidth: 45 MHz
- Slew rate: 150 V/µs
- 14-bit settling time: 120 ns
- Overload power limiter
- Wide supply voltage range: ±4 V to ±18 V
- Packages:
- D Package: 8-pin SOIC
- DGN Package: 8-pin HVSSOP
The OPA828 and OPA2828 ( OPAx828) JFET input operational amplifiers are the next generation OPA627 and OPA827, combining high speed with high dc precision and ac performance. These op amps supply low offset voltage, low drift over temperature, low bias current, and low noise with only 60-nVRMS 0.1-Hz to 10-Hz noise. The OPAx828 operate over a wide supply-voltage range of ±4 V to ±18 V and a supply current of 5.5 mA/channel, typical.
AC characteristics, including a 45-MHz gain bandwidth product (GBW), a slew rate of 150 V/µs, and precision dc characteristics, make the OPAx828 family an excellent choice for a variety of systems. These include high-speed and high-resolution data-acquisition systems, such as 16-bit to 18-bit mixed signal systems, transimpedance (I/V-conversion) amplifiers, filters, precision ±10-V front ends, and high-impedance sensor-interface applications.
The OPAx828 are available in an 8-pin SOIC package and a thermally enhanced, 8-pin HVSSOP PowerPAD™ integrated circuit package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | OPAx828 Low-Offset, Low-Drift, Low-Noise, 45-MHz, 36-V, JFET-Input Operational Amplifiers datasheet (Rev. D) | PDF | HTML | 2022. 12. 29 | |
| Circuit design | DAC force and sense reference drive circuit (Rev. A) | PDF | HTML | 2024. 9. 20 | ||
| Circuit design | Circuit for protecting low-voltage SAR ADC from electrical overstress with minim (Rev. A) | PDF | HTML | 2024. 9. 19 | ||
| 백서 | Op Amp Input and Output Swing Limitations | PDF | HTML | 2023. 12. 7 | ||
| Application brief | MUX-Friendly, Precision Operational Amplifiers (Rev. C) | PDF | HTML | 2022. 2. 8 | ||
| Application brief | Trade-offs Between CMOS, JFET, and Bipolar Input Stage Technology | 2019. 5. 29 | |||
| Application brief | Simplify Transimpedance Applications with High-bandwidth, Precision JFET Op Amps | 2019. 5. 21 | |||
| Application brief | Green-Williams-Lis: Improved Op Amp Spice Model | 2019. 1. 28 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈
증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.
AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.
- D(SOIC-8 및 SOIC-14)
- PW(TSSOP-14)
- DGK(VSSOP-8)
- (...)
PSpice Simulation Companion for DAC Force And Sense Reference Drive Circuit
TINA-TI Simulation Companion for DAC Force And Sense Reference Drive Circuit (Rev. A)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
OPAMP-NOISECALC — Noise Calculator
This folder contains three tools to help in understandning and managing noise in cicuits. The included tools are:
- A noise generator tool - This is a Lab View 4-Run Time executable that generates Gaussian white noise, uniform white noise, 1/f noise, short noise, and 60Hz line noise. Temporal data, (...)
TIDA-010970 — 저잡음, 높은 선형 디지털 멀티미터 및 데이터 수집 신호 체인 레퍼런스 설계
이 설계의 대상 애플리케이션에는 DC 신호를 초고정밀도로 측정해야 하는 DMM(디지털 멀티미터)이 포함됩니다. 이 설계는 높은 유효 선형성을 갖춘 고성능 24비트 ADC(아날로그-디지털 컨버터)인 ADS127L21B를 사용하여 우수한 DC 정확도를 달성합니다. 초저 드리프트 매립형 제너 레퍼런스인 REF81이 게인 및 오프셋 오류를 제거하기 위해 신호 체인을 보정합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HVSSOP (DGN) | 8 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.