OPA863A
- Gain-bandwidth product: 50MHz
- High precision:
- Input offset voltage: 95µV (maximum)
- Offset drift: 1.2µV/°C (maximum)
- Low power:
- Quiescent current: 800µA/ch (typical)
- Supply voltage: 2.7V to 12.6V
- Input voltage noise: 6.3nV/√Hz
- Slew rate: 100V/µs
- Rail-to-rail input and output
- HD2 and HD3:
- –129dBc and –138dBc at 20kHz (2VPP)
- Operating temperature range: –40°C to +125°C
- Additional features:
- Overload power limit
- Output short-circuit protection
The OPA863A and OPA2863A devices (OPAx863A) are low-power, unity-gain stable, rail-to-rail input and output, voltage-feedback operational amplifiers. These devices are trimmed in package to offer high-precision performance with a maximum input offset voltage of 95µV and offset drift of 1.2µV/°C for high accuracy measurements over temperature.
Consuming only 800µA per channel, the OPAx863A offer a gain-bandwidth product of 50MHz, slew rate of 100V/µs, and a voltage noise density of 6.3nV/√Hz. The rail-to-rail input stage with 2.7V supply operation is useful in portable, battery-powered applications. The rail-to-rail input stage is well matched for gain-bandwidth product and noise across the full input common-mode voltage range, enabling excellent performance with wide-input dynamic range.
The OPAx863A include overload power limiting to limit the increase in IQ with saturated outputs, thereby preventing excessive power dissipation in power-conscious, battery-operated systems. The output stage is short-circuit protected, making these devices conducive to ruggedized environments.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | OPAx863A High-Precision, 105MHz, Rail-to-Rail Input/Output Amplifiers datasheet (Rev. G) | PDF | HTML | 2024. 12. 24 | ||
| Application brief | High Speed Current Sensing for Data Center mCRPS Standards | PDF | HTML | 2026. 4. 7 | |||
| Circuit design | Circuit for driving high-voltage SAR ADC with a buffered instrumentation (Rev. A) | PDF | HTML | 2024. 9. 20 | |||
| Circuit design | Inverting circuit for high-to-low voltage level translation to drive ADC (Rev. A) | PDF | HTML | 2024. 9. 19 | |||
| Circuit design | Driving a low-voltage single-ended SAR ADC circuit with high-voltage input (Rev. A) | PDF | HTML | 2024. 9. 19 | |||
| Application brief | Higher accuracy using an external amplifier in ultrasonic flow measurement | 2019. 2. 5 | ||||
| 설계 가이드 | High-Speed, High-Side Current Sense Reference Design | 2017. 7. 19 | ||||
| 애플리케이션 노트 | ADC Input Protection | 2013. 9. 4 | ||||
| 애플리케이션 노트 | A Walk Along the Signal Path (High-Speed Signal Path) | 2005. 3. 30 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMP-PDK-EVM — 증폭기 성능 개발 키트 평가 모듈
증폭기 성능 개발 키트(PDK)는 일반적인 연산 증폭기(OP 앰프) 매개 변수를 테스트할 수 있는 평가 모듈(EVM) 키트입니다. 대부분의 연산 증폭기 및 콤퍼레이터와 호환됩니다. EVM 키트는 패키지 요구 사항에 맞는 여러 소켓형 부속 카드 옵션이 있는 메인 보드를 제공하여 엔지니어가 디바이스 성능을 신속하게 평가하고 확인할 수 있습니다.
AMP-PDK-EVM 키트는 다음을 포함해 가장 널리 사용되는 5개의 업계 표준 패키지를 지원합니다.
- D(SOIC-8 및 SOIC-14)
- PW(TSSOP-14)
- DGK(VSSOP-8)
- (...)
DEM-OPA-SOT-1A — SOT-23 5핀 및 6핀 패키지용 단일 연산 증폭기 평가 모듈
DEM-OPA-SOT-1A는 고속 광대역 연산 증폭기의 작동 및 성능을 평가하는 데모 보드입니다. 채워지지 않은 이 PC 보드는 소형 아웃라인 트랜지스터(SOT) DBV 패키지로 제공되는 제품과 호환됩니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |