OPA875
- 700MHz SMALL-SIGNAL BANDWIDTH
(AV = +2) - 425MHz, 4VPP BANDWIDTH
- 0.1dB GAIN FLATNESS to 200MHz
- 4ns CHANNEL SWITCHING TIME
- LOW SWITCHING GLITCH: 40mVPP
- 3100V/µs SLEW RATE
- 0.025%/0.025° DIFFERENTIAL GAIN, PHASE
- HIGH GAIN ACCURACY: 2.0V/V ±0.4%
- APPLICATIONS
- RGB SWITCHING
- LCD PROJECTOR INPUT SELECT
- WORKSTATION GRAPHICS
- ADC INPUT MUX
- DROP-IN UPGRADE TO LT1675-1
All other trademarks are the property of their respective owners.
The OPA875 offers a very wideband, single-channel 2:1 multiplexer in an SO-8 or a small MSOP-8 package. Using only 11mA, the OPA875 provides a gain of +2 video amplifier channel with greater than 425MHz large-signal bandwidth (4VPP). Gain accuracy and switching glitch are improved over earlier solutions using a new input stage switching approach. This technique uses current steering as the input switch while maintaining an overall closed-loop design. With greater than 700MHz small-signal bandwidth at a gain of 2, the OPA875 gives a typical 0.1dB gain flatness to greater than 200MHz.
System power may be reduced using the chip enable feature for the OPA875. Taking the chip enable line high powers down the OPA875 to less than 300µA total supply current. Muxing multiple OPA875 outputs together, then using the chip enable to select which channels are active, increases the number of possible inputs.
Where three channels are required, consider using the OPA3875 for the same level of performance.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | Single 2:1 High-Speed Video Multiplexer datasheet (Rev. C) | 2008. 8. 28 | ||
| 사용 설명서 | DEM-OPA-MSOP-1B Demonstration Fixture (Rev. C) | 2015. 4. 28 | |||
| 사용 설명서 | DEM-OPA-SO-1D Demonstration Fixture (Rev. A) | 2009. 4. 3 | |||
| 사용 설명서 | DEM-OPA-SO-1E User's Guide (Rev. A) | 2009. 4. 3 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DEM-OPA-MSOP-1B — DEM-OPA-MSOP-1B 평가 모듈
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| VSSOP (DGK) | 8 | Ultra Librarian |