인터페이스 I2C, I3C 및 SPI IC I2C 및 SPI GPIO(범용 I/O)

PCA9555

활성

인터럽트, 약한 풀업 및 구성 레지스터를 지원하는 16비트 2.3~5.5V I2C/SMBus I/O 확장기

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
TCA9555 활성 인터럽트, 약한 풀업 및 구성 레지스터를 지원하는 16비트 1.65~5.5V I2C/SMBus I/O 확장기 Performance enhancements for power-on reset, interrupt, and lower voltage operation.

제품 상세 정보

Number of I/Os 16 Features Configuration registers, Interrupt pin Addresses 8 Rating Catalog Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 85
Number of I/Os 16 Features Configuration registers, Interrupt pin Addresses 8 Rating Catalog Frequency (max) (MHz) 0.4 Operating temperature range (°C) -40 to 85
TSSOP (PW) 24 49.92 mm² (7.8 mm × 6.4 mm) SSOP (DB) 24 63.96 mm² (8.2 mm × 7.8 mm) TVSOP (DGV) 24 32 mm² (5 mm × 6.4 mm) SSOP (DBQ) 24 51.9 mm² (8.65 mm × 6 mm) VQFN (RGE) 24 16 mm² (4 mm × 4 mm) SOIC (DW) 24 159.65 mm² (15.5 mm × 10.3 mm)
  • Low Standby-Current Consumption of 1 µA Max
  • I2C to Parallel Port Expander
  • Open-Drain Active-Low Interrupt Output
  • 5-V Tolerant I/O Ports
  • Compatible With Most Microcontrollers
  • 400-kHz Fast I2C Bus
  • Address by Three Hardware Address Pins for Use of up to Eight Devices
  • Polarity Inversion Register
  • Latched Outputs With High-Current Drive Capability for Directly Driving LEDs
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)
  • Low Standby-Current Consumption of 1 µA Max
  • I2C to Parallel Port Expander
  • Open-Drain Active-Low Interrupt Output
  • 5-V Tolerant I/O Ports
  • Compatible With Most Microcontrollers
  • 400-kHz Fast I2C Bus
  • Address by Three Hardware Address Pins for Use of up to Eight Devices
  • Polarity Inversion Register
  • Latched Outputs With High-Current Drive Capability for Directly Driving LEDs
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Protection Exceeds JESD 22
    • 2000-V Human-Body Model (A114-A)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)

This 16-bit I/O expander for the two-line bidirectional bus (I2C) is designed for 2.3-V to 5.5-V VCC operation. It provides general-purpose remote I/O expansion for most microcontroller families via the I2C interface [serial clock (SCL), serial data (SDA)].

The PCA9555 consists of two 8-bit Configuration (input or output selection), Input Port, Output Port, and Polarity Inversion (active high or active low operation) registers. At power on, the I/Os are configured as inputs. The system master can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is kept in the corresponding Input or Output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.

This 16-bit I/O expander for the two-line bidirectional bus (I2C) is designed for 2.3-V to 5.5-V VCC operation. It provides general-purpose remote I/O expansion for most microcontroller families via the I2C interface [serial clock (SCL), serial data (SDA)].

The PCA9555 consists of two 8-bit Configuration (input or output selection), Input Port, Output Port, and Polarity Inversion (active high or active low operation) registers. At power on, the I/Os are configured as inputs. The system master can enable the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each input or output is kept in the corresponding Input or Output register. The polarity of the Input Port register can be inverted with the Polarity Inversion register. All registers can be read by the system master.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
7개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 PCA9555 Remote 16-bit I2C and SMBus I/O Expander with Interrupt Output and Configuration Registers datasheet (Rev. J) PDF | HTML 2021. 3. 11
애플리케이션 노트 I2C: What is the Auto Increment Feature? PDF | HTML 2024. 7. 5
애플리케이션 노트 Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A) PDF | HTML 2024. 7. 3
애플리케이션 노트 I2C Dynamic Addressing 2019. 4. 25
애플리케이션 노트 Choosing the Correct I2C Device for New Designs PDF | HTML 2016. 9. 7
애플리케이션 노트 Understanding the I2C Bus PDF | HTML 2015. 6. 30
애플리케이션 노트 I2C Bus Pull-Up Resistor Calculation PDF | HTML 2015. 2. 13

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

PCA9555 IBIS Model

SCPM035.ZIP (98 KB) - IBIS 모델
지원되는 제품 및 하드웨어
설계 툴

I2C-DESIGNER — I2C 디자이너 툴

I2C 설계자 툴을 사용하여 I2C 기반 설계의 주소 지정, 전압 레벨 및 주파수의 충돌을 신속하게 해결합니다. 마스터 및 슬레이브 입력을 입력하여 I2C 트리를 자동으로 생성하거나 사용자 지정 솔루션을 쉽게 구축합니다. 이 툴을 사용하면 설계자가 누락 승인을 디버깅하고, 풀업 저항을 선택하고, I2C 버스의 최대 커패시턴스 부하를 충족하는 방법에 대한 지침을 통해 시간을 절약하고 I2C 표준을 준수할 수 있습니다. 
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
TSSOP (PW) 24 Ultra Librarian
SSOP (DB) 24 Ultra Librarian
TVSOP (DGV) 24 Ultra Librarian
SSOP (DBQ) 24 Ultra Librarian
VQFN (RGE) 24 Ultra Librarian
SOIC (DW) 24 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상