REG71055
- Wide Input Voltage Range: 1.8 V to 5.5 V
- Automatic Step-Up and Step-Down Operation
- Low Input Current Ripple
- Low Output Voltage Ripple
- Minimum Number of External Components—No Inductors
- 1-MHz Internal Oscillator Allows Small Capacitors
- Shutdown Mode
- Thermal and Current Limit Protection
- Six Fixed Output Voltages Available:
- 2.5 V, 2.7 V, 3 V, 3.3 V, 5 V, 5.5 V
All trademarks are the property of their respective owners.
The REG710 family of devices are switched capacitor voltage converters that generate regulated, low-ripple output voltage from an unregulated input voltage. A wide input supply voltage from 1.8 V to 5.5 V makes the REG710 family of devices ideal for a variety of battery sources, such as single-cell Li-Ion, or 2-cell and 3-cell nickel-based or alkaline-based chemistries.
The input voltage may vary above and below the output voltage and the output remains in regulation. The device works as step-up or step-down converters without the need of an inductor, providing low EMI DC-DC conversion. The high switching frequency allows the use of small surface-mount capacitors, saving board space and reducing cost. The REG710 device is thermally protected and current limited, protecting the load and the regulator during fault conditions. Typical ground pin current (quiescent current) is 65 μA with no load, and less than 1 μA in shutdown mode.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | REG710xx Buck-Boost Charge Pump with up to 60-mA Output Current datasheet (Rev. H) | PDF | HTML | 2015/10/30 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-ADS7841-Q1 — ADS7841-Q1 12비트 4채널 직렬 출력 샘플링 ADC BoosterPack™ 플러그인 모듈
BOOSTXL-ADS7841-Q1은 SPI 호환 직렬 인터페이스를 지원하는 ADS7841-Q1 4채널, 12비트 SAR ADC의 성능을 평가하기 위한 플랫폼입니다. 평가 키트에는 사용자가 ADC를 구성하고, 데이터를 캡처하고, 데이터 분석을 수행할 수 있는 ADS7841-Q1 BoosterPack™ 플러그인 모듈 및 PC 소프트웨어가 포함되어 있습니다.
BOOSTXL-TLC2543 — 직렬 제어 및 11 아날로그 입력 BoosterPack™ 플러그인 모듈을 포함한 TLC2543-Q1 12비트 ADC
BOOSTXL-TLC24531은 SPI 호환 직렬 인터페이스를 지원하는 11채널, 12비트 SAR(연속 근사 레지스터) ADC(아날로그-디지털 컨버터)인 TLC2453-Q1의 성능을 평가하기 위한 플랫폼입니다. 평가 키트에는 사용자가 ADC를 구성하고, 데이터를 캡처하고, 데이터 분석을 수행할 수 있는 TLC2453-Q1 BoosterPack 보드 및 PC 소프트웨어가 포함되어 있습니다.
TIDA-01576 — 16비트 1MSPS 듀얼 동시 샘플링 ADC를 지원하는 고정밀 아날로그 입력 모듈 레퍼런스 설계
TIDA-00420 — ADC 기반, 디지털 절연, 넓은 입력, 16채널, AC/DC 이진 입력 레퍼런스 설계
TIDA-01214 — 16비트 ADC 및 디지털 아이솔레이터를 사용하는 절연, 고정밀 아날로그 입력 모듈 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23-THN (DDC) | 6 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.