제품 상세 정보

Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3.3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 6 BW at Acl (MHz) 70 Acl, min spec gain (V/V) 10 Slew rate (typ) (V/µs) 500 Architecture Fully Differential ADC Driver, High Input Impedance Vn at flatband (typ) (nV√Hz) 4.2 Iq per channel (typ) (mA) 2 Rail-to-rail Out Vos (offset voltage at 25°C) (max) (mV) 10 Operating temperature range (°C) -40 to 125 Iout (typ) (mA) 20 2nd harmonic (dBc) -115 3rd harmonic (dBc) -118 Frequency of harmonic distortion measurement (MHz) 0.1 GBW (typ) (MHz) 220 Input bias current (max) (pA) 750 Features Shutdown CMRR (typ) (dB) 80 Rating Catalog
Number of channels 1 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 3.3 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 6 BW at Acl (MHz) 70 Acl, min spec gain (V/V) 10 Slew rate (typ) (V/µs) 500 Architecture Fully Differential ADC Driver, High Input Impedance Vn at flatband (typ) (nV√Hz) 4.2 Iq per channel (typ) (mA) 2 Rail-to-rail Out Vos (offset voltage at 25°C) (max) (mV) 10 Operating temperature range (°C) -40 to 125 Iout (typ) (mA) 20 2nd harmonic (dBc) -115 3rd harmonic (dBc) -118 Frequency of harmonic distortion measurement (MHz) 0.1 GBW (typ) (MHz) 220 Input bias current (max) (pA) 750 Features Shutdown CMRR (typ) (dB) 80 Rating Catalog
WQFN (RUN) 10 4 mm² (2 mm × 2 mm)
  • Gain Bandwidth Product (GBWP): 220 MHz
  • Slew Rate: 500 V/µs
  • Bandwidth: 42 MHz (G = 10 V/V)
  • Voltage Noise: 4.2 nV/√ Hz
  • Supply Current (IQ): 2 mA
  • IQ : 28 µA (Shutdown)
  • Rail-to-Rail Output (RRO)
  • High Impedance CMOS Inputs
  • Independent Input and Output Common-Mode Control
  • Disable Input Common-Mode Loop to Use as a Standard Fully Differential Amplifier (FDA)
  • Single-Supply Range: 3.3 V to 5.5 V
  • Split-Supply Range: ±1.65 V to ±2.75 V
  • Operating Temperature Range: -40°C to 125°C
  • Gain Bandwidth Product (GBWP): 220 MHz
  • Slew Rate: 500 V/µs
  • Bandwidth: 42 MHz (G = 10 V/V)
  • Voltage Noise: 4.2 nV/√ Hz
  • Supply Current (IQ): 2 mA
  • IQ : 28 µA (Shutdown)
  • Rail-to-Rail Output (RRO)
  • High Impedance CMOS Inputs
  • Independent Input and Output Common-Mode Control
  • Disable Input Common-Mode Loop to Use as a Standard Fully Differential Amplifier (FDA)
  • Single-Supply Range: 3.3 V to 5.5 V
  • Split-Supply Range: ±1.65 V to ±2.75 V
  • Operating Temperature Range: -40°C to 125°C

The THS4567 device is a novel fully-differential amplifier (FDA) that includes independent input common-mode (VICM) and output-common mode (VOCM) control. Standard FDAs only possess output common-mode control. The THS4567 is a decompensated amplifier with a minimum stable gain of 10 V/V.

The THS4567 operates as a fully differential transimpedance amplifier (TIA) and analog-to-digital converter (ADC) driver in a single integrated stage.

The VICM loop decouples the reverse bias across the photodiode(PD) from the amplifiers input and output swing compliance ranges thereby allowing the designer to maximize the PD reverse bias and minimize the PD capacitance. The VICM loop can be disabled which then allows the THS4567 to operate as a standard FDA.

The VOCM loop sets the differential output common-mode voltage and is typically set at the subsequent ADC stage common-mode reference voltage.

The THS4567 device is a novel fully-differential amplifier (FDA) that includes independent input common-mode (VICM) and output-common mode (VOCM) control. Standard FDAs only possess output common-mode control. The THS4567 is a decompensated amplifier with a minimum stable gain of 10 V/V.

The THS4567 operates as a fully differential transimpedance amplifier (TIA) and analog-to-digital converter (ADC) driver in a single integrated stage.

The VICM loop decouples the reverse bias across the photodiode(PD) from the amplifiers input and output swing compliance ranges thereby allowing the designer to maximize the PD reverse bias and minimize the PD capacitance. The VICM loop can be disabled which then allows the THS4567 to operate as a standard FDA.

The VOCM loop sets the differential output common-mode voltage and is typically set at the subsequent ADC stage common-mode reference voltage.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 THS4567 220 MHz, High Input Impedance, Fully Differential Amplifier with Independent Input and Output Common-Mode Control datasheet PDF | HTML 2020. 10. 29
Product overview High Speed Amplifiers for Motor Encoders and Position Sensing PDF | HTML 2025. 4. 11

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

RUN-FDA-4567-EVM — 완전 차동 증폭기와 입력 공통 모드 제어 및 실행(VQFN-16) 패키지 평가 모듈

RUN-FDA-4567-EVM은 RUN(VQFN-16) 패키지의 THS4567과 같은 입력 공통 모드 제어를 지원하는 완전 차동 증폭기를 위한 미조립 평가 모듈(EVM)입니다. 이 EVM은 증폭기의 기능과 다기능성을 빠르고 쉽게 시연할 수 있도록 설계되었습니다. EVM은 온보드 커넥터를 사용하여 전원, 신호 소스 및 테스트 기기에 연결할 수 있습니다. 이 EVM은 입력 및 출력에 공통 50Ω 실험실 장비와 쉽게 연결할 수 있도록 구성하거나, 선택적으로 차동 다이오드 연결을 입력으로 사용할 수 있습니다. EVM에는 입력 공통 (...)
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

PSpice Circuit Containing THS4567 Model

SBOMBK5.ZIP (50 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

THS4567 TINA-TI Reference Design Circuit

SBOMBJ5.TSC (1388 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
계산 툴

SBOR022 — TI FDA Calculator

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
WQFN (RUN) 10 Ultra Librarian

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상