THVD8000T
- 3V to 5.5V supply voltage
- Half-duplex communication
- Up to 500kbps data rate with f0 / bps = 10
- Higher data rates are possible with f0 / bps < 10
- RS-485 electrical signaling with on-off keying (OOK) modulation
- Pin selectable carrier frequency: 125kHz to 5MHz
- Spread spectrum clocking for excellent EMI performance
- Polarity free
- TX timeout to avoid stuck bus conditions
- Operational common-mode range: –7V to 12V
- Bus I/O protection
- ± 18V DC fault protection
- ± 16kV HBM ESD
- ± 8kV IEC 61000-4-2 contact discharge
- ± 15kV IEC 61000-4-2 air gap discharge
- ± 4kV IEC 61000-4-4 fast transient burst
- Extended temperature range: −55°C to 125°C
- 8-Pin SOT-23 package for space constrained applications
THVD8000T is an RS-485 transceiver with on-off keying (OOK) modulation and demodulation built in for power line communication. Modulating data onto existing power lines allows power delivery and data communication to share a common pair of wires, resulting in a reduction of the system cost.
A pin programmable interface simplifies the system design. The carrier frequency can be adjusted by changing an external resistor on the F_SET pin. A broad range of carrier frequencies gives the system designer the flexibility to choose the external inductors and capacitors. OOK modulation also operates with immunity to data polarity for ease of system installations.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기 | 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | THVD8000T RS-485 Transceiver with OOK Modulation and Extended Temperature Range for Power Line Communication datasheet | PDF | HTML | 2025/03/25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
THVD8000EVM — RS-485 Power Over Bus 기능이 있는 THVD8000 평가 모듈
이 평가 모듈(EVM)은 THVD8000을 평가하는 데 사용됩니다. 전원 버스 기능을 사용한 RS-485는 Vcc/GND 및 Vbb/GNB를 별도로 연결하여 구현할 수 있습니다. 애플리케이션에 따라 스위치가 다른 OOK 반송파 주파수를 선택할 수 있습니다. 모든 로직 신호는 헤더 및 테스트 포인트를 통해 사용할 수 있으며 올바른 점퍼 배치를 통해 모드를 쉽게 전환할 수 있습니다.
사용 설명서: PDF
시뮬레이션 툴
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
시뮬레이션 툴
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
사용 설명서: PDF
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23-THN (DDF) | 8 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치