전력 관리 부하 스위치

TPS2561A-Q1

활성

자동 2채널 0.25-2.8A 조정 가능 ILIMIT(2.3±0.2A로 튜닝), 2.5-6.5V, 44mΩ USB 전원 스위치, 액티브 하이

제품 상세 정보

Product type Adjustable current limit, Power switch Vin (max) (V) 6.5 Vin (min) (V) 2.5 Rating Automotive Number of channels 2 Operating temperature range (°C) -40 to 125 Current limit accuracy at 1 A 2.1A Min / 2.5A Max Setting (Including Resistor) Enable Active High
Product type Adjustable current limit, Power switch Vin (max) (V) 6.5 Vin (min) (V) 2.5 Rating Automotive Number of channels 2 Operating temperature range (°C) -40 to 125 Current limit accuracy at 1 A 2.1A Min / 2.5A Max Setting (Including Resistor) Enable Active High
VSON (DRC) 10 9 mm² (3 mm × 3 mm)
  • AEC-Q100 Qualified
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C5
  • Two separate current limiting channels
  • Meets USB Current-Limiting Requirements
  • Adjustable Current Limit, 250 mA–2.8 A (Typ.)
  • Accurate 2.1A Min / 2.5A Max Setting
  • Fast Short Circuit Response − 3.5-μs (typ)
  • Two 44−mΩ High-Side MOSFETs
  • Operating Range: 2.5 V to 6.5 V
  • 2−μA Maximum Standby Supply Current
  • Built-in Soft-Start
  • 15 kV / 8 kV System-Level ESD Capable
  • AEC-Q100 Qualified
    • Device HBM ESD Classification Level H2
    • Device CDM ESD Classification Level C5
  • Two separate current limiting channels
  • Meets USB Current-Limiting Requirements
  • Adjustable Current Limit, 250 mA–2.8 A (Typ.)
  • Accurate 2.1A Min / 2.5A Max Setting
  • Fast Short Circuit Response − 3.5-μs (typ)
  • Two 44−mΩ High-Side MOSFETs
  • Operating Range: 2.5 V to 6.5 V
  • 2−μA Maximum Standby Supply Current
  • Built-in Soft-Start
  • 15 kV / 8 kV System-Level ESD Capable

The TPS2561A-Q1 is dual-channel power-distribution switch intended for automotive applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered. These devices offer a programmable current-limit threshold between 250 mA and 2.8 A (typ) per channel via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during turn on/off.

Each channel of the TPS2561A-Q1 devices limits the output current to a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. The FAULTx logic output for each channel independently asserts low during overcurrent and over temperature conditions.

Use with the TPS2511-Q or TPS2513A-Q1 for a low loss, automotive qualified, USB Charging Port Solution capable of charging all of today's popular phones and tablets.

The TPS2561A-Q1 is dual-channel power-distribution switch intended for automotive applications where precision current limiting is required or heavy capacitive loads and short circuits are encountered. These devices offer a programmable current-limit threshold between 250 mA and 2.8 A (typ) per channel via an external resistor. The power-switch rise and fall times are controlled to minimize current surges during turn on/off.

Each channel of the TPS2561A-Q1 devices limits the output current to a safe level by switching into a constant-current mode when the output load exceeds the current-limit threshold. The FAULTx logic output for each channel independently asserts low during overcurrent and over temperature conditions.

Use with the TPS2511-Q or TPS2513A-Q1 for a low loss, automotive qualified, USB Charging Port Solution capable of charging all of today's popular phones and tablets.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능.
TPS2557-Q1 활성 오토모티브 0.5-5A 조정 가능한 ILIMIT, 2.5-6.5V, 22mΩ USB 전원 스위치, 액티브 하이 This product offers similar functionality in a single channel with lower RDS(on).

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
3개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPS2561A-Q1 Dual Channel Precision Automotive Adjustable Current-Limited Power Switches datasheet (Rev. A) PDF | HTML 2014. 6. 3
인증서 US-37138-UL Certificate of Compliance IEC 62368-1 2021. 3. 12
선택 가이드 Power Management Guide 2018 (Rev. R) 2018. 6. 25

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS2561DRCEVM-424 — TPS2561DRCEVM-424: TPS2561용 평가 모듈

The TPS2560EVM-424 and TPS2561EVM-424 are evaluation modules (EVM) for Texas Instruments power-distribution switches with adjustable current-limit. These EVMs operate over a 2.5-V to 6.5-V range. An on-board jumper sets the output current-limit to either 0.5 A or 1 A. The board is designed for the (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

TPS2561 Unencrypted PSpice Transient Model Package (Rev. A)

SLVM475A.ZIP (33 KB) - PSpice 모델
지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-01388 — 완전한 프론트 엔드 보호를 지원하는 CISPR 25 클래스 5 정격 듀얼 오토모티브 USB 충전기 레퍼런스 디자인

TIDA-01388은 작은 크기에 완벽한 프론트 엔드 보호 기능을 갖춘 21W 이중 차량용 USB 충전기 솔루션입니다. 시스템은 빠른 고전압 전기 과도 상태를 클램핑하고 이러한 이벤트를 통해 작동을 유지할 수 있습니다. 또한 배터리 극성 역전 이벤트에 적절히 반응하고 적절하게 종료할 수도 있습니다.
이 설계는 5.5V~36V의 넓은 입력 전압 범위를 수용하고 이중 USB 포트에 대해 5 V@2.1 A의 두 가지 출력을 조정합니다. EMI 필터링 회로가 포함되어 있으며 설계는 CISPR 25 클래스 5 전도 EMI 표준을 준수합니다.
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
VSON (DRC) 10 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상