TPS25730A
- PD3.2 compatible for sink only applications
- PD3.2 is the latest power delivery specification from USB-IF
- Article on PD2.0 vs. PD3.0
- Fully configurable single port PD controller
- Optimized for sink only USB Type-C and USB PD applications
- Complete barrel jack replacement for to USB Type-C
- Fully configurable with pin strapping
- Industrial temperature range supported
- Fully managed integrated power path
- Integrated overvoltage protection and reverse current protection
- USB Type-C Power delivery (PD) controller
- 6 GPIO set functions
- Cable attach and orientation detection
- Integrated dead battery Rd
- Physical layer and policy engine
- 3.3V LDO output for dead battery support
- Power supply from 3.3V or VBUS source
- I2C access for external microcontroller
The TPS25730A is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimized for applications supporting USB-C PD Power. The TPS25730A integrates fully managed power paths with robust protection for a complete USB-C PD application. The TPS25730A also has the ability to control an external power path through the use of internal gate drivers. The TPS25730A is best suited for sink only applications that have previously been powered by a barrel jack. Using resistor pin strapping, a user can implement a fully featured USB Type-C PD port with the TPS25730A. There is no need for an external EEPROM, an external microcontroller, or any type of firmware development.
The TPS25730A is intended to make setting up a sink only USB Type-C application simple yet robust. A user has all of the benefits of a barrel jack port, while now taking advantage of the benefits of USB Type-C and USB Type-C PD.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | TPS25730A USB Type-C® and USB PD Controller With Integrated Power Switches Optimized for Sink Power Applications datasheet | PDF | HTML | 2026/03/27 |
| EVM User's guide | TPS25730A Evaluation Module (Rev. A) | PDF | HTML | 2026/03/25 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS25730AEVM — TPS25730A evaluation module
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RSM) | 32 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치