전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS54308

활성

4.5V~28V 입력, 3A 출력 동기식 350-kHz FCCM 스텝다운 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS62933 활성 SOT-583 패키지의 3.8V~30V, 3A, 200kHz~2.2MHz, 저 IQ 동기 벅 컨버터 30 VIN with higher frequency and lower IQ.
TPS62933F 활성 SOT-583 패키지의 3.8V~30V 입력, 3A, 200kHz~2.2MHz 동기식 벅 컨버터 30 VIN with higher frequency, lower IQ and FCCM

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 28 Vin (min) (V) 4.5 Vout (max) (V) 26 Vout (min) (V) 1 Features Enable, Forced PWM, Prebias startup, Soft-start fixed, Synchronous rectification, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 350 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 300 Duty cycle (max) (%) 100 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 28 Vin (min) (V) 4.5 Vout (max) (V) 26 Vout (min) (V) 1 Features Enable, Forced PWM, Prebias startup, Soft-start fixed, Synchronous rectification, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 350 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 300 Duty cycle (max) (%) 100 Type Converter
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8
  • 4.5-V to 28-V wide input voltage range
  • Integrated 85-mΩ and 40-mΩ MOSFETs for 3-A, continuous output current
  • Low 2-µA shutdown, 300-µA quiescent current
  • Internal 5-mS soft start
  • Fixed 350-kHz switching frequency
  • Peak current mode control
  • Internal loop compensation
  • Overcurrent protection for both MOSFETs with hiccup mode protection
  • Overvoltage protection
  • Thermal shutdown
  • SOT-23 (6) package
  • Create a custom design using the TPS54308 with the WEBENCH Power Designer
  • 4.5-V to 28-V wide input voltage range
  • Integrated 85-mΩ and 40-mΩ MOSFETs for 3-A, continuous output current
  • Low 2-µA shutdown, 300-µA quiescent current
  • Internal 5-mS soft start
  • Fixed 350-kHz switching frequency
  • Peak current mode control
  • Internal loop compensation
  • Overcurrent protection for both MOSFETs with hiccup mode protection
  • Overvoltage protection
  • Thermal shutdown
  • SOT-23 (6) package
  • Create a custom design using the TPS54308 with the WEBENCH Power Designer

The TPS54308 is a 4.5-V to 28-V input voltage range, 3-A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation, and 5-ms internal soft start to reduce component count.

By integrating the MOSFETs and employing the SOT-23 package, the TPS54308 achieves high power density and offers a small footprint on the PCB.

The TPS54308 operates in force continuous conduction mode (FCCM) during light load conditions. The switching frequency is maintained at an almost constant level over entire load range.

Cycle-by-cycle current limit in both high-side MOSFETs protects the converter in an overload condition and is enhanced by a low-side MOSFET freewheeling current limit, which prevents current runaway. Hiccup mode protection is triggered if the overcurrent condition has persisted for longer than the present time.

The TPS54308 is a 4.5-V to 28-V input voltage range, 3-A synchronous buck converter. The device includes two integrated switching FETs, internal loop compensation, and 5-ms internal soft start to reduce component count.

By integrating the MOSFETs and employing the SOT-23 package, the TPS54308 achieves high power density and offers a small footprint on the PCB.

The TPS54308 operates in force continuous conduction mode (FCCM) during light load conditions. The switching frequency is maintained at an almost constant level over entire load range.

Cycle-by-cycle current limit in both high-side MOSFETs protects the converter in an overload condition and is enhanced by a low-side MOSFET freewheeling current limit, which prevents current runaway. Hiccup mode protection is triggered if the overcurrent condition has persisted for longer than the present time.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS54302 활성 4.5V~28V 입력, 3A 출력, EMI 친화적 동기식 스텝다운 컨버터 Equivalent part with ECO-mode.
비교 대상 장치와 유사한 기능
TPSM84209 활성 4.5V~28V 입력, 1.2V~6V 출력, 2.5A 전원 모듈 Simplify your design with an integrated-inductor power module.

기술 자료

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS54308EVM-876 — TPS54308 4.5V ~ 28V 입력, 3A 출력 동기 스텝다운 컨버터 평가 모듈

TPS54308 DC/DC 컨버터는 8V~28V의 입력 전압 소스에서 최대 3A를 출력하도록 설계되었습니다. 저부하에서 스위칭 주파수가 오디오 범위로 낮아져 귀에 들리는 문제를 방지하기 위해 TPS54308은 강제 PWRM 모드에서 작동합니다.

TPS54308EVM-876 EVM(평가 모듈)은 TPS54308 레귤레이터를 사용하여 설계할 때 달성할 수 있는 작은 인쇄 회로 보드 영역을 시연하기 위해 설계되었습니다. 스위칭 주파수는 내부적으로 공칭 340kHz로 설정됩니다. 고압측 및 저압측 MOSFET은 게이트 드라이브 회로와 (...)
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

TPS54308 Unencrypted PSpice Transient Model Package (Rev. C)

SLUM585C.ZIP (798 KB) - PSpice Model
계산 툴

SLUC685 TPS54308 Design Calculator

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS54308 4.5V~28V 입력, 3A 출력 동기식 350-kHz FCCM 스텝다운 컨버터
레퍼런스 디자인

TIDA-010216 — 대용량 애플리케이션을 위한 저압측 MOSFET 제어를 지원하는 16s 배터리 팩 레퍼런스 설계

이 레퍼런스 설계는 대기 전류와 절전 모드 전류 소비가 낮고 셀 전압 정확도가 높은 16s 리튬 이온(Li-ion) LiFePO4 배터리 팩 설계입니다. 이 설계는 높은 정확도로 각 셀 전압, 팩 전류, 셀 및 MOSFET 온도를 모니터링하고 셀 과전압, 셀 부족 전압, 과열, 충전 및 방전 과전류 및 방전 단락 상황으로부터 리튬 이온 및 LiFePO4 배터리 팩을 보호합니다. 5쌍의 저압측 N-채널 MOSFET 아키텍처는 설계가 더 큰 충전 및 방전 전류를 견딜 수 있는 강력한 ON/OFF 기능과 결합됩니다. 이 레퍼런스 (...)
Design guide: PDF
레퍼런스 디자인

PMP40994 — IGBT용으로 1500V 절연이 포함되어 있는 4W 듀얼 채널 절연 게이트 드라이버 레퍼런스 설계

이 레퍼런스 설계는 태양광 인버터, PC, UPS 및 모터 드라이버 애플리케이션의 절연 게이트 양극 트랜지스터(IGBT)를 위한 소형 듀얼 채널 출력 절연 게이트 드라이버 보드 설계입니다. 절연 바이어스 전력은 우수한 전압 조정을 달성하면서 1,500V 절연의 2채널 절연 출력을 제공하는 TPS54308을 사용하여 플라이벅 토폴로지로 구현됩니다. 이 설계는 간편한 제조를 위한 단일 계층 PCB 보드입니다.
Test report: PDF
레퍼런스 디자인

PMP40589 — 단일 IGBT 드라이버를 위한 2W 보조 전원 공급 장치 레퍼런스 설계

이 레퍼런스 설계는 TPS54308 동기 벅 컨버터를 사용하는 단일 IGBT 드라이버 바이어스를 위한 듀얼 출력 절연 플라이벅 전력 모듈입니다. 이 컨버터는 400mA 전류 용량으로 +3.3V의 비절연 출력 1개와 9V~22V의 입력 전압 범위에서 80mA 전류 용량으로 +15V 및 -8V의 절연 출력 2개를 생성합니다.
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-23-THN (DDC) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상