전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS562201

활성

Eco-mode를 지원하는 4.5V~17V 입력, 2A 출력 동기 스텝다운 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS562203 활성 에코 모드를 지원하는 SOT563의 4.2V~17V 입력, 2A 동기 벅 컨버터 Higher efficiency in a smaller package

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 17 Vin (min) (V) 4.5 Vout (max) (V) 7 Vout (min) (V) 0.76 Features Enable, Light Load Efficiency, Soft Start Fixed, Synchronous Rectification Control mode D-CAP2 Switching frequency (min) (kHz) 580 Switching frequency (max) (kHz) 580 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 400 Duty cycle (max) (%) 80 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 17 Vin (min) (V) 4.5 Vout (max) (V) 7 Vout (min) (V) 0.76 Features Enable, Light Load Efficiency, Soft Start Fixed, Synchronous Rectification Control mode D-CAP2 Switching frequency (min) (kHz) 580 Switching frequency (max) (kHz) 580 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 400 Duty cycle (max) (%) 80 Type Converter
SOT-23-THN (DDC) 6 8.12 mm² 2.9 x 2.8
  • TPS562201 and TPS562208 2A converter integrated 140mΩ and 84mΩ FETs
  • D-CAP2™ control scheme with fast transient response
  • Input voltage range: 4.5V to 17V
  • Output voltage range: 0.76V to 7V
  • Pulse-skip mode (TPS562201) or continuous current mode (TPS562208)
  • 580kHz switching frequency
  • Low shutdown current less than 20µA
  • 2% feedback voltage accuracy (25°C)
  • Start-up from prebiased output voltage
  • Cycle-by-cycle overcurrent limit
  • Hiccup-mode overcurrent protection
  • Non-latch UVP and TSD protections
  • Fixed soft start: 1.0ms
  • Create a custom design using the TPS56220x with the WEBENCH Power Designer
  • TPS562201 and TPS562208 2A converter integrated 140mΩ and 84mΩ FETs
  • D-CAP2™ control scheme with fast transient response
  • Input voltage range: 4.5V to 17V
  • Output voltage range: 0.76V to 7V
  • Pulse-skip mode (TPS562201) or continuous current mode (TPS562208)
  • 580kHz switching frequency
  • Low shutdown current less than 20µA
  • 2% feedback voltage accuracy (25°C)
  • Start-up from prebiased output voltage
  • Cycle-by-cycle overcurrent limit
  • Hiccup-mode overcurrent protection
  • Non-latch UVP and TSD protections
  • Fixed soft start: 1.0ms
  • Create a custom design using the TPS56220x with the WEBENCH Power Designer

The TPS562201 and TPS562208 are simple, easy-to-use, 2A synchronous step-down converters in SOT-23 package.

The devices are designed to operate with minimum external component counts and also designed to achieve low standby current.

These switch mode power supply (SMPS) devices employ D-CAP2 control scheme providing a fast transient response and supporting both low equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.

The TPS562201 operates in pulse skip mode, which maintains high efficiency during light load operation. The TPS562201 and TPS562208 are available in a 6-pin 1.6mm × 2.9 mm SOT (DDC) package and specified from a –40°C to 125°C junction temperature.

The TPS562201 and TPS562208 are simple, easy-to-use, 2A synchronous step-down converters in SOT-23 package.

The devices are designed to operate with minimum external component counts and also designed to achieve low standby current.

These switch mode power supply (SMPS) devices employ D-CAP2 control scheme providing a fast transient response and supporting both low equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.

The TPS562201 operates in pulse skip mode, which maintains high efficiency during light load operation. The TPS562201 and TPS562208 are available in a 6-pin 1.6mm × 2.9 mm SOT (DDC) package and specified from a –40°C to 125°C junction temperature.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
TPS563201 활성 Eco-mode를 지원하는 4.5V~17V 입력, 3A 출력 동기 스텝다운 컨버터 Higher current (3A) equivalent
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS561201 활성 6핀 SOT-23의 4.5V~17V 입력, 1A 동기 스텝다운 전압 레귤레이터 Pin-to-pin compatible lower current product (1 A).
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS562211 활성 SOT583에서 1% 정확도, PG/SS 및 PFM/강제-PWM을 지원하는 4.2V~18V, 2A, 동기 벅 컨버터 This product has soft-start and power-good operations.
TPS562243 활성 에코 모드를 지원하는 SOT563의 4.2V~17V 입력 전압, 2A 1.2MHz 동기식 벅 컨버터 Improved efficiency and higher switching frequency in a smaller package
비교 대상 장치와 유사한 기능
TPS562242 활성 SOT563의 3V~17V 입력 전압, 2A, 1.4MHz 동기식 벅 컨버터 Upgrade with improved efficiency and smaller package

기술 자료

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS562201EVM-715 — 2A, SWIFT 스텝다운 전압 컨버터 평가 모듈

The TPS562201 is a single, adaptive on-time, D-CAP2™ mode, synchronous buck converter requiring a very low external component count. The D-CAP2 control circuit is optimized for low-ESR output capacitors such as POSCAP, SP-CAP, or ceramic types and features fast transient response with no (...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

TPS562201 Unencrypted PSpice Transient Model Package (Rev. B)

SLVMBE2B.ZIP (105 KB) - PSpice Model
레퍼런스 디자인

TIDA-010034 — 부하 지점의 IEEE802.3at Type-1 PoE 및 12V 어댑터 입력에 대한 IP 네트워크 카메라용 레퍼런스 설계

PoE(Power over Ethernet)를 사용하면 데이터 스트림의 혼선, 간섭 또는 손상 위험 없이 데이터와 동일한 이더넷 케이블을 통해 전력을 전송할 수 있습니다. 이 레퍼런스 설계는 TI의 DaVinci™ 디지털 미디어 프로세서 또는 다른 애플리케이션 프로세서에 기반을 둔 PoE 또는 12V 어댑터를 사용하여 전원이 공급되는 IP 네트워크 카메라용 엔드 투 엔드 전원 트리를 보여줍니다. 전원 트리는 또한 다음과 같이 IP 네트워크 카메라의 다양한 주변 장치에 필요한 레일도 파생합니다. 이미지 센서, 모터 제어, 이더넷 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

PMP21065 — 셋톱 박스용 초저 대기 전력, 고효율, DC-DC 전원 공급 장치 레퍼런스 설계

PMP21065 레퍼런스 설계는 일반 12V DC 입력 전압에서 작동하여 요즘 셋톱 박스에서 쓰이는 몇 가지 일반적인 레일을 생성합니다. 이 설계의 주된 목표는 저비용, 작은 크기, 낮은 대기 전력에 우수한 효율을 달성하여 고객이 STB 소비 전력에 대한 새로운 규제 가이드라인을 준수하도록 돕는 것입니다.
Test report: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01451 — 셋톱 박스로 전원 스위칭 레퍼런스 디자인

TIDA-01451 레퍼런스 설계의 기능은 셋톱 박스의 전력 분배를 에뮬레이션합니다. 통합 부하 스위치를 사용하여 전원 레일을 제어하면 사용자의 요구와 필요에 따라 각 레일을 켜거나 끌 수 있습니다. 사용하지 않는 레일을 끄면 전력 손실을 줄이고 Energy Star와 같은 에너지 준수 표준을 쉽게 충족할 수 있습니다. 입력에 배치된 eFuse는 핫 플러그 과도 상태를 관리하고 너무 높거나 낮은 입력 전압으로부터 다운스트림 DC/DC 컨버터를 보호하여 완제품의 반품률을 줄일 수 있습니다.
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-23-THN (DDC) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상