TPS61097A-33
- Up to 93% Efficiency at Typical Operating
Conditions - Connection from Battery to Load via Bypass
Switch in Shutdown Mode - Typical Shutdown Current Less Than 5 nA
- Typical Quiescent Current Less Than 5 µA
- Operating Input Voltage Range
From 0.9 V to 5.5 V - Power-Save Mode for Improved Efficiency at
Low Output Power - Overtemperature Protection
- Small 2.8-mm × 2.9-mm 5-Pin SOT-23
Package
The TPS61097A-33 provides a power supply solution for products powered by either a single-cell, two-cell, or three-cell alkaline, NiCd, or NiMH, or one-cell Li-Ion or Li-polymer battery. They can also be used in fuel cell or solar cell powered devices where the capability of handling low input voltages is essential. Possible output currents depend on the input-to-output voltage ratio. The devices provide output currents up to 100 mA at a 3.3-V output while using a single-cell Li-Ion or Li-Polymer battery. The boost converter is based on a current-mode controller using synchronous rectification to obtain maximum efficiency. The maximum average input current is limited to a value of 400 mA. The converter can be disabled to minimize battery drain. During shutdown, the battery is connected to the load to enable battery backup of critical functions on the load. The device is packaged in a 5-pin SOT-23 package (DBV) measuring 2.8 mm × 2.9 mm.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | TPS61097A-33 Low-Input Voltage Synchronous-Boost Converter With Low Quiescent Current datasheet (Rev. A) | PDF | HTML | 2014. 12. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS61097AEVM-073 — TPS61097AEVM-073 평가 모듈
The TPS61097AEVM-073 evaluation module (EVM) demonstrates the Texas Instruments TPS61097A-33 synchronous boost converter. The input voltage range of the TPS61097A-33 is 0.9 to 5.5 V, which allows the device to operate from one-cell to three-cell battery configurations in addition to a single-cell (...)
TIDA-00480 — 차량용 홀 센서 회전식 인코더
이 제품은 비접촉 자기 감지 방식을 사용하여 회전 속도와 방향을 감지하는 증분형 회전식 인코더입니다. 두 개의 홀 효과 센서가 66극 링 자석을 측정하여 90도 위상차를 갖는 두 개의 신호를 출력합니다. 이 차량용 인증 솔루션은 물리적 마모, 먼지, 부식 및 RF 잡음의 영향을 받지 않는 반도체형 감지 방식을 사용하므로 기존의 기계식 접촉 방식 인코더보다 저렴하고 훨씬 신뢰할 수 있는 대안입니다.
TIDC-CC3200SMARTPLUG — SimpleLink™ Wi-Fi® CC3200 스마트 플러그
Increasingly, applications require Wi-Fi-enabled energy measurement and control, particularly in end products such as Smart Plugs and Smart Receptacles, and in general application spaces such as home appliances, Smart Grid, and building automation.
The CC3200 Smart Plug is a full system solution, (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.