전력 관리 DC/DC switching regulators DC/DC converters

TPS62770

활성

WCSP에서 360nA Iq 벅 및 최대 15V 부스트를 지원하는 소형 싱글 칩 듀얼 솔루션

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 0.3 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 15 Vout (min) (V) 1 Features Adaptive/Dynamic Voltage Scaling, Enable, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed Control mode DCS-Control Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00000037 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 0.3 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 15 Vout (min) (V) 1 Features Adaptive/Dynamic Voltage Scaling, Enable, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed Control mode DCS-Control Operating temperature range (°C) -40 to 85 Iq (typ) (A) 0.00000037 Duty cycle (max) (%) 100
DSBGA (YFP) 16 3.24 mm² 1.8 x 1.8
  • VIN Range 2.5 V to 5.5 V
  • 370 nA Iq Step-Down Converter
    • 8 Selectable Output Voltages (1.0V to 3.0V)
    • 300 mA Output Current
    • Output Discharge Function
  • Slew Rate Controlled Load Switch with Discharge
    Function
  • Dual Mode Step-Up Converter
    • Load Disconnect
    • Constant Output Voltage Adjustable up to 15 V
      (VFB 0.8 V) / 12 V Fixed
    • LED Current Driver with PWM to Current
      Conversion (max VFB Voltage 200 mV @ D =
      100%)
  • Tiny 16pin 1.58 × 1.58mm WCSP Package 0.4mm
    pitch
  • VIN Range 2.5 V to 5.5 V
  • 370 nA Iq Step-Down Converter
    • 8 Selectable Output Voltages (1.0V to 3.0V)
    • 300 mA Output Current
    • Output Discharge Function
  • Slew Rate Controlled Load Switch with Discharge
    Function
  • Dual Mode Step-Up Converter
    • Load Disconnect
    • Constant Output Voltage Adjustable up to 15 V
      (VFB 0.8 V) / 12 V Fixed
    • LED Current Driver with PWM to Current
      Conversion (max VFB Voltage 200 mV @ D =
      100%)
  • Tiny 16pin 1.58 × 1.58mm WCSP Package 0.4mm
    pitch

The TPS62770 is a tiny power solution for wearable applications including a 370nA ultra low Iq step-down converter, a slew rate controlled load switch and a dual mode step-up converter. The output voltage of the step-down converter can be selected with three VSEL pins between 1.0 V, 1.05 V, 1.1 V, 1.2 V, 1.8 V, 1.9 V, 2.0 V and 3.0 V. The output voltage can be changed during operation. In shutdown mode, the output of the step-down converter is pulled to GND. The integrated load switch is internally connected to the output of the step-down converter and features slew rate control during turn on phase. Once turned off, its output is connected to GND.

The dual mode step-up converter can generate a constant output voltage up to 15 V, such as PMOLED supply; or, a constant output current, such as LED back light supply. The output voltage can be adjusted up to 15 V with external resistors, or set to fixed 12 V by connecting the FB pin to VIN. The device features an internal over voltage protection of 17.7 V in case the FB node is left open or tight to GND. It includes an internal rectifier and load disconnect function. When used as constant output current driver, the device offers a PWM to analog converter to scale down the reference voltage according to the duty cycle of the PWM signal.

The device is available in a small 16pin 0.4mm pitch WCSP package.

The TPS62770 is a tiny power solution for wearable applications including a 370nA ultra low Iq step-down converter, a slew rate controlled load switch and a dual mode step-up converter. The output voltage of the step-down converter can be selected with three VSEL pins between 1.0 V, 1.05 V, 1.1 V, 1.2 V, 1.8 V, 1.9 V, 2.0 V and 3.0 V. The output voltage can be changed during operation. In shutdown mode, the output of the step-down converter is pulled to GND. The integrated load switch is internally connected to the output of the step-down converter and features slew rate control during turn on phase. Once turned off, its output is connected to GND.

The dual mode step-up converter can generate a constant output voltage up to 15 V, such as PMOLED supply; or, a constant output current, such as LED back light supply. The output voltage can be adjusted up to 15 V with external resistors, or set to fixed 12 V by connecting the FB pin to VIN. The device features an internal over voltage protection of 17.7 V in case the FB node is left open or tight to GND. It includes an internal rectifier and load disconnect function. When used as constant output current driver, the device offers a PWM to analog converter to scale down the reference voltage according to the duty cycle of the PWM signal.

The device is available in a small 16pin 0.4mm pitch WCSP package.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 유사한 기능
TPS62740 활성 2.2V~5.5V 입력, 초저전력 300mA 스텝다운 벅 DCDC 컨버터(360nA IQ 지원) Single-channel low-IQ buck converter

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
6개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TPS62770 Multi-Rail DC/DC Converter For Wearable Applications datasheet (Rev. B) PDF | HTML 2016/04/11
Application note Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 2022/05/23
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019/10/14
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 2019/06/14
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018/06/22
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 2016/10/24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62770EVM-734 — TPS62770 다중 레일 DC/DC 컨버터 평가 모듈

TPS62770EVM-734는 사용자가 TPS62770 다중 레일 DC/DC 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. EVM은 소형 솔루션에 최적화되어 있고 완전한 기능 세트를 제공하는 두 개의 독립적인 전력계 솔루션을 제공합니다. 전력 계는 2.0V~5.5V의 입력 전압 범위 두 레일을 제공합니다. 벅 레일은 1.0V에서 3.3V 사이에서 디지털 방식으로 조정할 수 있습니다. 부스트 레일은 최대 15V까지 올라갈 수 있습니다.

사용 설명서: PDF
TI.com에서 구매할 수 없음
시뮬레이션 모델

TPS62770 PSpice Unencrypted Transient Model (Rev. A)

SLVMBI1A.ZIP (280 KB) - PSpice Model
계산 툴

SLVC780 Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

레퍼런스 디자인

PMP21884 — 배터리 충전을 지원하는 웨어러블용 초소형 초저 IQ DC/DC 전원 공급 장치 레퍼런스 설계

초소형(48제곱밀리미터)의 초저 IQ를 지원하는 스마트워치 및 피트니스 트래커를 위한 고집적 전원 공급 장치 레퍼런스 설계입니다. 공급 장치에는 배터리 충전기, LDO, DC/DC 벅 컨버터 및 심박수 모니터를 위한 일체형 부스트 컨버터, AFE LED 드라이브 공급 장치 또는 PMOLED 바이어스를 포함해 7개의 전원 레일이 포함됩니다.
Test report: PDF
회로도: PDF
레퍼런스 디자인

PMP9792 — 웨어러블 애플리케이션을 위한 다중 레일, 낮은 IQ 전원 레퍼런스 디자인

스마트 손목 밴드와 같은 웨어러블 애플리케이션은 무선 MCU, 센서 및 디스플레이에 전원을 공급하는 두 개의 주 전원 레일을 제공합니다. 이러한 애플리케이션은 매우 작기 때문에 솔루션 크기가 최대한 작아야 합니다. 이 레퍼런스 설계는 TPS62770 멀티 레일 DC/DC 컨버터, CC2650 무선 MCU 및 PMOLED 디스플레이 기반의 전체 솔루션을 보여줍니다.
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YFP) 16 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상