전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS65400

활성

4.5V~18V 입력, 4A/4A/2A/2A 동기 쿼드 컨버터(PMBus/I2C 인터페이스 포함)

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 4 Vin (max) (V) 18 Vin (min) (V) 4.5 Vout (max) (V) 16 Vout (min) (V) 0.8 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Frequency synchronization, I2C, Overcurrent protection, PMBus, Phase Interleaving, Power good, Prebias startup, Soft-start adjustable, Synchronous rectification, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 275 Switching frequency (max) (kHz) 2200 Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 8000 Duty cycle (max) (%) 92.5 Type Converter
Rating Catalog Topology Buck Iout (max) (A) 4 Vin (max) (V) 18 Vin (min) (V) 4.5 Vout (max) (V) 16 Vout (min) (V) 0.8 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Frequency synchronization, I2C, Overcurrent protection, PMBus, Phase Interleaving, Power good, Prebias startup, Soft-start adjustable, Synchronous rectification, UVLO adjustable Control mode current mode Switching frequency (min) (kHz) 275 Switching frequency (max) (kHz) 2200 Operating temperature range (°C) -40 to 85 Iq (typ) (µA) 8000 Duty cycle (max) (%) 92.5 Type Converter
VQFN (RGZ) 48 49 mm² 7 x 7
  • Efficiency up to 95% for each switching regulator
  • Switching regulator specifications:
    • Input voltage range: 4.5 to 18 V
    • VOUT range: 0.6 V-90%VIN
    • SW1, SW2 IOUT: 4-A max
    • SW3, SW4 IOUT: 2-A max
  • Prebias start-up algorithm minimizes voltage dip during start-up
  • Internal undervoltage lockout (UVLO), overcurrent protection (OCP), overvoltage protection (OVP), and overtemperature protection (OTP)
  • AECQ-100 grade 1 option
  • Thermally enhanced 7-mm × 7-mm 48-pin, 0.5-mm pitch VQFN package
  • Pin accessible features:
    • Adjustable VOUT with external feedback resistors
    • Sequencing control through precision enable pins for each switcher
    • Resistor adjustable PWM switching frequency from 275 kHz to 2.2 MHz
    • Clock sync input and clock output
    • Soft-start delay through external capacitor
    • Current sharing between SW1 and SW2 and between SW3 and SW4 allows support of higher current needs if required
  • PMBus runtime control and status
    • Runtime voltage positioning through adjustment of VREF
    • Enable and disable of each switcher
    • Fault and status monitoring
  • User-configurable PMBus/I2C options, saved in EEPROM
    • Power supply turn-on and turn-off sequencing
    • Sequencing can be based on fixed time delays or PGOOD dependence
    • Initial voltage positioning through VREF configuration
    • PWM frequency adjustment for each switcher
    • Individual PWM phase alignment for each switcher to minimize ripple and capacitor size
    • Adjustable current limit on each regulator enables size and cost optimization of inductors
    • Soft-start time
  • Efficiency up to 95% for each switching regulator
  • Switching regulator specifications:
    • Input voltage range: 4.5 to 18 V
    • VOUT range: 0.6 V-90%VIN
    • SW1, SW2 IOUT: 4-A max
    • SW3, SW4 IOUT: 2-A max
  • Prebias start-up algorithm minimizes voltage dip during start-up
  • Internal undervoltage lockout (UVLO), overcurrent protection (OCP), overvoltage protection (OVP), and overtemperature protection (OTP)
  • AECQ-100 grade 1 option
  • Thermally enhanced 7-mm × 7-mm 48-pin, 0.5-mm pitch VQFN package
  • Pin accessible features:
    • Adjustable VOUT with external feedback resistors
    • Sequencing control through precision enable pins for each switcher
    • Resistor adjustable PWM switching frequency from 275 kHz to 2.2 MHz
    • Clock sync input and clock output
    • Soft-start delay through external capacitor
    • Current sharing between SW1 and SW2 and between SW3 and SW4 allows support of higher current needs if required
  • PMBus runtime control and status
    • Runtime voltage positioning through adjustment of VREF
    • Enable and disable of each switcher
    • Fault and status monitoring
  • User-configurable PMBus/I2C options, saved in EEPROM
    • Power supply turn-on and turn-off sequencing
    • Sequencing can be based on fixed time delays or PGOOD dependence
    • Initial voltage positioning through VREF configuration
    • PWM frequency adjustment for each switcher
    • Individual PWM phase alignment for each switcher to minimize ripple and capacitor size
    • Adjustable current limit on each regulator enables size and cost optimization of inductors
    • Soft-start time

The TPS65400 is an integrated PMU optimized for applications requiring small form factor and high power conversion efficiency, enabling small space-constrained equipment with high ambient operating temperature without cooling. The device provides high-power efficiency at a system level by enabling a single stage conversion from an intermediate distribution bus with an optimized combination of regulators.

The TPS65400 is an integrated PMU optimized for applications requiring small form factor and high power conversion efficiency, enabling small space-constrained equipment with high ambient operating temperature without cooling. The device provides high-power efficiency at a system level by enabling a single stage conversion from an intermediate distribution bus with an optimized combination of regulators.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
유형 직함 날짜
* Data sheet TPS65400 4.5- to 18-V Input Flexible Power Management Unit With PMBus/I2C Interface datasheet (Rev. E) PDF | HTML 2022/03/17
Application note How to Calculate the Load Pole and ESR Zero When Using Hybrid Output Capacitors (Rev. A) 2019/04/02

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS65400EVM-678 — TPS65400EVM 평가 모듈

The TPS65400EVM-678 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS65400. The max DC output current of this EVM is 4A,4A, 2A and 2A. The EVM contains input and output connectors as well as control jumpers to ease evaluation of device features. It also has EN1, (...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
드라이버 또는 라이브러리

SLVC604 LGPL Library Source Used by PI-Commander-PMU

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS65400 4.5V~18V 입력, 4A/4A/2A/2A 동기 쿼드 컨버터(PMBus/I2C 인터페이스 포함)
평가 모듈(EVM)용 GUI

SLVC603 PI-Commander-PMU EVM GUI

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
TPS65400 4.5V~18V 입력, 4A/4A/2A/2A 동기 쿼드 컨버터(PMBus/I2C 인터페이스 포함)
하드웨어 개발
평가 보드
TPS65400EVM-678 TPS65400EVM 평가 모듈
시뮬레이션 모델

TPS65400 PSpice Average Model

SLVMAI6.ZIP (91 KB) - PSpice Model
시뮬레이션 모델

TPS65400 PSpice Transient Model

SLVMAI5.ZIP (73 KB) - PSpice Model
시뮬레이션 모델

TPS65400 TINA-TI Transient Reference Design

SLVMC03.TSC (139 KB) - TINA-TI Reference Design
시뮬레이션 모델

TPS65400 TINA-TI Transient Spice Model

SLVMC04.ZIP (19 KB) - TINA-TI Spice Model
레퍼런스 디자인

TIDEP0081 — ADC32RF80에 66AK2L06 JESD204B 연결을 사용하여 광대역 리시버 설계 레퍼런스 디자인

현재 고속 데이터 컨버터를 베이스밴드 프로세서에 연결하기 위해 FPGA 또는 ASIC를 사용하는 광대역 리시버 시스템 개발자는 성능 향상과 비용, 전력, 크기의 대폭적인 감소를 통해 시장 출시 시간을 단축해야 합니다. 이 레퍼런스 설계에는 JESD204B 인터페이스 및 디지털 프론트 엔드 프로세싱(DFE)을 통합한 업계 최초의 광범위한 프로세서가 포함되어 있습니다. ADC32RF80DAC38J84에 연결하면 항공 및 방위, 테스트 및 측정, 산업용 애플리케이션을 위한 효율적인 솔루션을 제공합니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

PMP11414 — 공간이 제한된 애플리케이션을 위한 소형 디지털 쿼드 4/4/2/2A 부하 지점 레퍼런스 디자인

PMP11414 레퍼런스 설계는 초소형 0.65"x0.875"(16.5mmx22.2mm) 크기의 솔루션에서 TPS65400 쿼드 4/4/2/2A 출력 부하 지점을 제공합니다. TPS65400은 4개의 벅 레귤레이터를 소형 7mmx7mm QFN 패키지에 완전히 통합합니다. 또한 유연한 제어 및 구성을 위한 PMBus 기능도 있습니다.  PMP11414는 높은 효율성과 유연한 마지닝 및 시퀀싱 기능을 위한 인텔리전스를 보여주었습니다.
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGZ) 48 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상