전원 관리 선형 및 저손실(LDO) 레귤레이터

TPS746

활성

전원 양호 및 활성화를 지원하는 1A, 저 IQ, 고정밀, 조정 가능한 초저 손실 전압 레귤레이터

제품 상세 정보

Output options Adjustable Output Iout (max) (A) 1 Vin (max) (V) 6 Vin (min) (V) 1.5 Vout (max) (V) 5.5 Vout (min) (V) 0.55 Noise (µVrms) 53 Iq (typ) (mA) 0.025 Thermal resistance θJA (°C/W) 80.3 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start Accuracy (%) 1 PSRR at 100 KHz (dB) 45 Dropout voltage (Vdo) (typ) (mV) 190 Operating temperature range (°C) -40 to 125
Output options Adjustable Output Iout (max) (A) 1 Vin (max) (V) 6 Vin (min) (V) 1.5 Vout (max) (V) 5.5 Vout (min) (V) 0.55 Noise (µVrms) 53 Iq (typ) (mA) 0.025 Thermal resistance θJA (°C/W) 80.3 Rating Catalog Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Features Enable, Foldback Overcurrent protection, Output discharge, Power good, Soft start Accuracy (%) 1 PSRR at 100 KHz (dB) 45 Dropout voltage (Vdo) (typ) (mV) 190 Operating temperature range (°C) -40 to 125
WSON (DRV) 6 4 mm² 2 x 2
  • Input Voltage Range: 1.5 V to 6.0 V
  • Adjustable Output Voltage:
    • 0.55 V to 5.5 V
  • Very Low Dropout:
    • 225 mV (max) at 1 A (3.3 VOUT)
  • High Output Accuracy:
    • 0.7%, Typical
    • 1%, Maximum Over Temperature (85°C)
  • Open-Drain Power-Good Output
  • Power-Good Rising Delay:
    • TPS746: 165 µs
    • TPS746B: 5 ms
  • IQ: 25 µA (Typical)
  • Built-In Soft-Start With Monotonic VOUT Rise
  • Package:
    • 2-mm × 2-mm 6-Pin WSON (DRV)
  • Active Output Discharge
  • Input Voltage Range: 1.5 V to 6.0 V
  • Adjustable Output Voltage:
    • 0.55 V to 5.5 V
  • Very Low Dropout:
    • 225 mV (max) at 1 A (3.3 VOUT)
  • High Output Accuracy:
    • 0.7%, Typical
    • 1%, Maximum Over Temperature (85°C)
  • Open-Drain Power-Good Output
  • Power-Good Rising Delay:
    • TPS746: 165 µs
    • TPS746B: 5 ms
  • IQ: 25 µA (Typical)
  • Built-In Soft-Start With Monotonic VOUT Rise
  • Package:
    • 2-mm × 2-mm 6-Pin WSON (DRV)
  • Active Output Discharge

The TPS746 is an adjustable 1-A low-dropout (LDO) regulator with power-good functionality. This device is available in a small, 6-pin, 2-mm × 2-mm WSON package and consumes very low quiescent current and provides fast line and load transient performance. The TPS746 features an ultra-low dropout of 225 mV at 1 A that can help improve the power efficiency of the system.

The TPS746 is optimized for a wide variety of applications by supporting an input voltage range from 1.5 V to 6.0 V and an externally adjustable output range of 0.55 V to 5.5 V. The low output voltage enables this LDO to power the modern microcontrollers with lower core voltages. Additionally, the TPS746 has a low IQ with enable functionality to minimize standby power. This device features an internal soft-start to lower the inrush current, which provides a controlled voltage to the load and minimizes the input voltage drop during start up.

The TPS746 has a power-good (PG) output that monitors the voltage at the feedback pin to indicate the status of the output voltage. The EN input and PG output can be used for sequencing multiple power sources in the system.

The TPS746 is stable with small ceramic output capacitors, allowing for a small overall solution size. A precision band-gap and error amplifier provides a high accuracy of 0.7% max at 25ºC and 1% max over temperature (85ºC). This device includes integrated thermal shutdown, current limit, and undervoltage lockout (UVLO) features. The TPS746 has an internal foldback current limit that helps reduce the thermal dissipation during short-circuit events.




The TPS746 is an adjustable 1-A low-dropout (LDO) regulator with power-good functionality. This device is available in a small, 6-pin, 2-mm × 2-mm WSON package and consumes very low quiescent current and provides fast line and load transient performance. The TPS746 features an ultra-low dropout of 225 mV at 1 A that can help improve the power efficiency of the system.

The TPS746 is optimized for a wide variety of applications by supporting an input voltage range from 1.5 V to 6.0 V and an externally adjustable output range of 0.55 V to 5.5 V. The low output voltage enables this LDO to power the modern microcontrollers with lower core voltages. Additionally, the TPS746 has a low IQ with enable functionality to minimize standby power. This device features an internal soft-start to lower the inrush current, which provides a controlled voltage to the load and minimizes the input voltage drop during start up.

The TPS746 has a power-good (PG) output that monitors the voltage at the feedback pin to indicate the status of the output voltage. The EN input and PG output can be used for sequencing multiple power sources in the system.

The TPS746 is stable with small ceramic output capacitors, allowing for a small overall solution size. A precision band-gap and error amplifier provides a high accuracy of 0.7% max at 25ºC and 1% max over temperature (85ºC). This device includes integrated thermal shutdown, current limit, and undervoltage lockout (UVLO) features. The TPS746 has an internal foldback current limit that helps reduce the thermal dissipation during short-circuit events.




다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TLV759P 활성 1A, 저 IQ, 높은 정확도, 조정 가능한 초저 손실 전압 레귤레이터(활성화) No PG functionality

기술 문서

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
모두 보기3
유형 직함 날짜
* Data sheet TPS746 1-A High Accuracy Adjustable LDO With Power-Good in a Small Size Package datasheet (Rev. A) PDF | HTML 2018/12/11
Application note Power Supply Design for AMD Versal™ AI Edge Series PDF | HTML 2024/01/29
EVM User's guide TPS746EVM-009 Evaluation Module User's Guide 2018/03/14

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS746EVM-009 — 전력 양호를 지원하는 TPS746 조정 가능 1A LDO 선형 레귤레이터 평가 모듈

The TPS746EVM-009 evaluation module (EVM) is designed for a typical configuration to evaluate the operation and performance of the TPS746, which is a 1-A, low-Vin, low-dropout (LDO) voltage regulator with power good.

The EVM circuit board is configured to be a reference design for engineering (...)

사용 설명서: PDF
TI.com에서 구매할 수 없습니다
시뮬레이션 모델

TPS74601P PSpice Transient Model

SBVM927.ZIP (43 KB) - PSpice Model
시뮬레이션 모델

TPS74601P Unencrypted PSpice Transient Model

SBVM928.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS74601PB PSpice Transient Model

SBVM929.ZIP (44 KB) - PSpice Model
시뮬레이션 모델

TPS74601PB Unencrypted PSpice Transient Model

SBVM930.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS746065P PSpice Transient Model

SBVM934.ZIP (47 KB) - PSpice Model
시뮬레이션 모델

TPS746065P Unencrypted PSpice Transient Model

SBVM935.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS74633P PSpice Transient Model

SBVM936.ZIP (44 KB) - PSpice Model
시뮬레이션 모델

TPS74633P Unencrypted PSpice Transient Model

SBVM938.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS74650P PSpice Transient Model

SBVM937.ZIP (45 KB) - PSpice Model
시뮬레이션 모델

TPS74650P Unencrypted PSpice Transient Model

SBVM933.ZIP (3 KB) - PSpice Model
레퍼런스 디자인

TIDA-020061 — 100/1000Base-T1 이더넷 애플리케이션용 차량용 데이터 라인을 통한 PD 전원 레퍼런스 설계

이 레퍼런스 설계는 차량용 애플리케이션에서 PoDL(Power over Data Line)을 시연하는 PD(Power Device)를 구현합니다. 이 설계는 100MBit/s 작동에 대해 DP83TG720S-Q1 1000MBit/s 단일 페어 이더넷(SPE) PHY를 사용하는 옵션으로 DP83TG720S-Q1 SPE PHY를 사용합니다. 커플링 및 디커플링 네트워크는 SPE(Single Pair Ethernet) 케이블의 데이터와 전원을 분할하는 데 사용됩니다.
Design guide: PDF
패키지 다운로드
WSON (DRV) 6 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상