전력 관리 LED 드라이버 조명 LED 드라이버

TPS92411

활성

리플 전류가 낮은 오프라인 AC 선형 LED 직접 드라이브용 부동 스위치

제품 상세 정보

Input voltage type AC Linear Topology AC Direct-Drive, Floating Switch Vin (min) (V) 8 Vin (max) (V) 94 Vout (max) (V) 94 Vout (min) (V) 9 Iout (max) (A) 0.35 Iq (typ) (mA) 0.2 Features Soft Switching Operating temperature range (°C) -40 to 150 Dimming method Forward Phase (Triac), Reverse Phase Number of channels 1 Rating Catalog
Input voltage type AC Linear Topology AC Direct-Drive, Floating Switch Vin (min) (V) 8 Vin (max) (V) 94 Vout (max) (V) 94 Vout (min) (V) 9 Iout (max) (A) 0.35 Iq (typ) (mA) 0.2 Features Soft Switching Operating temperature range (°C) -40 to 150 Dimming method Forward Phase (Triac), Reverse Phase Number of channels 1 Rating Catalog
SOT-23 (DBV) 5 8.12 mm² (2.9 mm × 2.8 mm) HSOIC (DDA) 8 29.4 mm² (4.9 mm × 6 mm)
  • High-Performance Solution for Driving LEDs from AC Mains
  • Simplifies Design of Phase Dimmable LED Driver with High Power
    Factor, Low Total Harmonic Distortion, and Low Current Ripple
  • Suitable for LED Luminaires up to 70+ W
  • Input Voltage Range: 7.5 V to 100 V
  • Stackable 100 V, 2-Ω MOSFET Building Block
  • Controlled Switch Open and Close Transitions Minimize EMI
  • Designed for use with the TPS92410 or with a Discrete
    Linear Regulator
  • Input Undervoltage Protection
  • Output Overvoltage Protection (TPS92411P)
  • Low IQ: 200 µA (typ)
  • High-Performance Solution for Driving LEDs from AC Mains
  • Simplifies Design of Phase Dimmable LED Driver with High Power
    Factor, Low Total Harmonic Distortion, and Low Current Ripple
  • Suitable for LED Luminaires up to 70+ W
  • Input Voltage Range: 7.5 V to 100 V
  • Stackable 100 V, 2-Ω MOSFET Building Block
  • Controlled Switch Open and Close Transitions Minimize EMI
  • Designed for use with the TPS92410 or with a Discrete
    Linear Regulator
  • Input Undervoltage Protection
  • Output Overvoltage Protection (TPS92411P)
  • Low IQ: 200 µA (typ)

The TPS92411 is a 100-V floating MOSFET switch for use in offline LED lighting applications. The device is used in conjunction with a current regulator that can achieve a power factor greater than 0.9 to create a LED drive solution with low-ripple current. When properly designed, solution performance is comparable to traditional flyback, buck or boost-based AC/DC LED drivers. The approach requires no inductive components, thus saving size and cost. Slew-controlled low-frequency operation of the TPS92411 switches creates very little EMI. Detailed operation is described in the Application Information section.

Package options include SOT23-5 and PSOP-8 allowing the user to optimize for small size or scale for high power. Using the PSOP-8 package, design of LED luminaires up to 70 W or more is possible. Other features include a UVLO circuit to monitor when the device has sufficient voltage to operate properly and over-voltage protection (TPS92411P).

The TPS92411 is a 100-V floating MOSFET switch for use in offline LED lighting applications. The device is used in conjunction with a current regulator that can achieve a power factor greater than 0.9 to create a LED drive solution with low-ripple current. When properly designed, solution performance is comparable to traditional flyback, buck or boost-based AC/DC LED drivers. The approach requires no inductive components, thus saving size and cost. Slew-controlled low-frequency operation of the TPS92411 switches creates very little EMI. Detailed operation is described in the Application Information section.

Package options include SOT23-5 and PSOP-8 allowing the user to optimize for small size or scale for high power. Using the PSOP-8 package, design of LED luminaires up to 70 W or more is possible. Other features include a UVLO circuit to monitor when the device has sufficient voltage to operate properly and over-voltage protection (TPS92411P).

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 TPS92411x Floating Switch for Offline AC Linear Direct Drive of LEDs with Low Ripple Current datasheet (Rev. B) PDF | HTML 2014. 4. 28
백서 Common LED Functions and LED Driver Design Considerations 2020. 9. 21

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS92410EVM-001 — TPS92410EVM-001 평가 모듈

The TPS92410VEVM-001 implements a 120V linear regulator dimming solution using theTPS92410 and TPS92411 integrated circuits from Texas Instruments. The TPS92410 is a linear controller with analog dimming functionality, thermal foldback, and a mode switch function to improve compatibility with phase (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
평가 보드

TPS92410EVM-002 — TPS92410EVM-002 평가 모듈

The TPS92410VEVM implements a 230V linear regulator dimming solution using the TPS92410 and TPS92411 integrated circuits from Texas Instruments. The TPS92410 is a linear controller with analog dimming functionality, thermal foldback, and a mode switch function to improve compatibility with phase (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
평가 보드

TPS92411EVM-001 — TPS92411 120VAC 선형 LED 직접 드라이브용 부동 스위치 평가 보드 모듈

The TPS92411EVM-001 implements a 120VAC, 12W, phase dimmable light engine with high power factor and low LED current ripple on a single-sided metal core printed circuit board (MCPCB). The included LED drive circuit is comprised of a high voltage linear regulator and TPS92411 floating switches (...)

지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
평가 보드

TPS92411EVM-002 — TPS92411 230VAC 선형 LED 직접 드라이브용 부동 스위치 평가 보드 모듈

The TPS92411EVM-002 implements a 230V linear regulator dimming solution using the TPS92411 integrated circuit from Texas Instruments. The TPS92411 is a smart switch designed to connect the LEDs in series at the proper times during a line cycle. The EVM can support applications up to ~16W.

지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

TPS92411 PSpice Transient Model (Rev. A)

SLUM410A.ZIP (108 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS92411 TINA-TI Transient Reference Design (Rev. A)

SLUM421A.TSC (163 KB) - TINA-TI 레퍼런스 설계
지원되는 제품 및 하드웨어
시뮬레이션 모델

TPS92411 TINA-TI Transient Spice Model (Rev. A)

SLUM422A.ZIP (16 KB) - Tina-TI Spice 모델
지원되는 제품 및 하드웨어
계산 툴

SLVC579 — TPS92410 120V Calculator

지원되는 제품 및 하드웨어
계산 툴

TPS92411-120VDESIGN-CALC — TPS92411 120V Calculator

The TPS92411-120V Design Calculator is an Excel based design tool to aid in determining the external component values required to implement a 120VAC input LED drive solution using TPS92411, 100 V floating MOSFET switches. TPS92411's used in conjunction with a current regulator create an (...)

지원되는 제품 및 하드웨어
계산 툴

TPS92411-230VDESIGN-CALC — TPS92411 230V Calculator

The TPS92411-230V Design Calculator is an Excel based design tool to aid in determining the external component values required to implement a 230VAC input LED drive solution using TPS92411, 100 V floating MOSFET switches. TPS92411's used in conjunction with a current regulator create an (...)

지원되는 제품 및 하드웨어
레퍼런스 디자인

TIDA-01399 — 50W, 120V AC 오프라인, LED 드라이버, 자기 부품 없음, LED 일반 조명용 레퍼런스 디자인

이 레퍼런스 설계는 단일 PCB(인쇄 회로 보드)에 모든 부품을 배치하며, 구역 조명을 위해 50W 출력 전력과 함께 TPS92410 및 TPS92411을 사용합니다. 이 설계는 4개의 TPS92411 단계를 사용하여 상승 및 하강 정류 AC 파형 동안 16개의 스위치 상태를 지원하며, 이는 전류 조정 MOSFET 헤드룸을 최적화합니다. TPS92410은 전류 레귤레이터를 끄기 전에 최소 3%까지 단조 아날로그 조광을 구현할 수 있습니다. 자기 부품 없는 EMI(전자기 간섭) 필터링이 포함되어 있으며 FCC Title 47 (...)
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-23 (DBV) 5 Ultra Librarian
HSOIC (DDA) 8 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상