UCC28610
- Cascoded Configuration Allows Fully Integrated
Current Control Without External Sense Resistor - Fast Start Up With Low Standby Power Achieved
by Cascode Configuration - Frequency and Peak Current Modulation for
Optimum Efficiency Over Entire Operating Range - Green-Mode (GM) Burst Switching Packets
Improve No-Load Efficiency - Advanced Overcurrent Protection Limits RMS
Input and Output Currents - Thermal Shutdown
- Timed Overload With Retry or Latch-Off
Response - Programmable Opto-Less Output Overvoltage
Protection - Fast Latched Fault Recovery
- 8-Pin SOIC Package and 8-Pin PDIP Lead-Free
Packages
The UCC28610 brings a new level of performance and reliability to the AC and DC consumer power supply solution.
A PWM modulation algorithm varies both the switching frequency and primary current while maintaining discontinuous or transition mode operation over the entire operating range. Combined with a cascoded architecture, these innovations result in efficiency, reliability, and system cost improvements over a conventional flyback architecture.
The UCC28610 offers a predictable maximum power threshold and a timed response to an overload, allowing safe handling of surge power requirements. Overload fault response is user-programmed for retry or latch-off mode. Additional protection features include output overvoltage detection, programmable maximum on-time, and thermal shutdown.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | UCC28610 Green-Mode Flyback Controller datasheet (Rev. G) | PDF | HTML | 2015. 9. 30 | |
| 선택 가이드 | Power Management Guide 2018 (Rev. R) | 2018. 6. 25 | |||
| 추가 자료 | Exposing the Inner Behavior of a Quasi-Resonant Flyback Converter | 2013. 10. 29 | |||
| 애플리케이션 노트 | High-Efficiency AC-DC TV Power Solutions: An Intelligent LED Backlight Scheme | 2011. 7. 15 | |||
| 애플리케이션 노트 | A High Efficiency Synchronous Rectifier Flyback for High Density AC/DC Adapter | 2011. 6. 3 | |||
| 추가 자료 | Seminar 400 Topic 2 - Design of Flyback Transformers and Filter Inductors | 2001. 2. 15 | |||
| 추가 자료 | Seminar 300 Topic 8 - Switching Power Supply Design Review | 2001. 2. 15 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
UCC28610EVM-474 — 25W 범용 오프라인 플라이백 컨버터 평가 모듈
UCC28610EVM-474 평가 모듈은 2.1A의 최대 부하 전류에서 12V를 제공하는 25W 오프라인 DCM(불연속 모드) 플라이백 컨버터로, 범용 AC 입력에서 작동합니다. 이 모듈은 외부 감지 저항 없이 완전 통합된 전류 제어를 지원하는 캐스코드 아키텍처를 사용하는 UCC28610 그린 모드 플라이백 컨트롤러로 제어됩니다. 컨버터는 전체 작동 범위에 걸쳐 불연속 모드 작동을 유지합니다. 이 혁신적인 접근 방식은 기존 플라이백에 비해 효율성, 안정성 및 시스템 비용을 향상합니다.
PMP10020 — 멀티 출력을 지원하는 33W 오프라인 QR 플라이백 컨버터 레퍼런스 디자인
This design uses the UCC28610 quasi-resonant flyback controller to generate 3 isolated outputs from an universal input (90VAC - 290VAC). It was built on a low cost single layer PCB. The regulated output provides 12V@1.89A and the maximum output power is 33W.
PMP10145 — 38W 오프라인 AC/DC 전환 모드 동기 플라이백 컨버터 레퍼런스 디자인
PMP10145 레퍼런스 설계는 전환 모드 플라이백 토폴로지에 UCC28610 플라이백 컨트롤러를 사용합니다. 넓은 AC 입력 전압 범위(80VAC~291VAC)에서 절연 출력(9V@4.22A)을 생성합니다. 컨트롤러는 전체 작동 범위에서 불연속 모드 작동 및 밸리 스위칭을 유지합니다. UCC24630 동기 정류기 컨트롤러는 고부하에서 우수한 효율을 제공합니다.
TIDM-SMARTMETERBOARD3 — 스마트 전기 계량기 개발 플랫폼(SMB)
스마트 전기 계량기 개발 플랫폼 또는 스마트 계량기 보드(SMB 3.0)는 에너지 측정, 전력선 통신, 무선 통신, 전원 관리 및 임베디드 프로세싱을 포함한 주요 TI 스마트 그리드 기술을 통합한 모듈식 개발 플랫폼입니다. 모든 유형의 스마트 전자계량기에 대한 TI의 스마트 그리드 기술을 평가해 볼 수 있는 탁월한 플랫폼입니다. SMB를 사용하면 개발자가 여러 TI 에너지 측정 및 통신 솔루션을 비교하고 자신의 애플리케이션에 가장 적합한 옵션을 파악하기가 더 쉬워집니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.