UCC28750
- Stable continuous conduction mode (CCM) operation with internal slope compensation
- Fixed-frequency operation of 65kHz or 100kHz
- Secondary-side regulation (SSR) with opto-coupler
- Frequency foldback and burst mode for improved light-load efficiency
- Frequency dithering for improved EMI performance
- Gate source/sink capability: 300mA/500mA
- Internal 4ms soft-start
- Robust protection features:
- Over-voltage and Under-voltage lockout
- Output over-power protection (OPP)
- Output short-circuit (OSC) protection
- Output over-voltage (OVP) protection
- Cycle-by-cycle peak over-current limit
- External over-temperature, over-voltage protection (OTP, OVP) and brownout detection on FLT pin
- Internal thermal shutdown
UCC28750 is a highly-integrated current-mode, continuous-conduction-capable, PWM controller optimized for high performance, low standby power, and cost effective offline flyback converter applications using an opto-coupler. During light-load conditions the device enters frequency foldback and burst modes, improving light-load efficiency. The burst-mode algorithm used in UCC28750 controls the minimum effective switching frequency to prevent audible noise during light-load conditions. Frequency dithering improves EMI performance, and is active in normal, frequency foldback, and power boost operations.
UCC28750 provides protection features that enable a robust converter design with minimal external components. Output over-power protection (OPP) and cycle-by-cycle over-current limit protect the load and power-stage components from electrical stress. Over-voltage and under-voltage lockout (OVLO and UVLO) prevent switching in unwanted input conditions. The FLT pin provides line brown-out sensing and protection, or external over-temperature and over-voltage protection, depending on the device variant. The FLT pin is also used to disable the device through external control by pulling the pin to ground, regardless of the device variant.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | UCC28750 Current-Mode Flyback Controller with Secondary-Side Regulation (SSR) for Off-Line Applications datasheet | PDF | HTML | 2022. 4. 1 | |
| 기술 문서 | 보조 플라이백 전원 공급 장치에 대한 고려 사항 (Rev. A) | PDF | HTML | Download English Version (Rev.A) | 2024. 9. 18 | |
| 애플리케이션 노트 | Retrofit UCC28750 EVM to Support Aux Power Application | PDF | HTML | 2024. 6. 6 | ||
| 기술 문서 | 단일 커패시터를 추가하여 듀얼 출력 플라이백 전원 공급 장치의 교차 조정 개선 | PDF | HTML | Download English Version | 2024. 3. 22 | |
| 기술 문서 | 플라이백 컨버터 스너빙 | PDF | HTML | Download English Version | 2024. 3. 22 | |
| 인증서 | UCC28750EVM-071 EU Declaration of Conformity (DoC) | PDF | HTML | 2023. 11. 20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
UCC28750EVM-071 — 전류 모드 플라이백 컨트롤러용 UCC28750 평가 모듈
UCC28750-SIMPLIS — UCC28750 Flyback Controller SIMPLIS Model
UCC28750-CALC — Excel calculator tool for the UCC28750 Flyback controller
PMP31288 — 폭 7.8W의 AC 입력 비절연 고압측 벅 레퍼런스 설계
PMP31338 — 매우 넓은 입력 비절연 고압측 벅 컨버터 레퍼런스 설계
이 레퍼런스 설계는 최대 0.6A에서 13V 출력을 제공하는 매우 넓은 입력, 오프라인, 고압측 벅 레퍼런스 설계입니다. 입력 전압 범위는 85VAC~485VAC 사이입니다. 이 레퍼런스 설계는 옵토커플러 피드백 없이 UCC28750 전류 모드 플라이백 컨트롤러를 사용합니다. 절연이 없으며, 이 설계에서는 출력을 조정하기 위해 저비용 전류 미러를 사용합니다. 이 설계는 인덕터 근처에서 최대 200mT의 자기장에 저항하도록 개발되었습니다.
PMP31376 — 범용 AC 입력을 9V~26.5V로 변환하는 100W 배터리 충전기 레퍼런스 설계
이 레퍼런스 설계는 오프라인 절연 플라이백입니다. AC-DC 전력계는 CCM(연속 전도 모드) 및 DCM(불연속 전도 모드) 변조와 2차측 조정을 지원하는 UCC28750 고정 주파수 피크 전류 모드 컨트롤러를 기반으로 합니다. 주파수 폴드백과 버스트 모드는 저부하 효율을 개선하며, 주파수 디더링은 EMI(전자기 간섭) 시그니처를 줄입니다. 이 컨트롤러는 과전압과 부족 저압 록아웃, Vout 과전압, 과출력 및 단락 보호를 포함한 여러 보호 기능을 제공합니다.
PMP31422 — 낮은 대기 전력 넓은 입력 전압 UCC287508 레퍼런스 설계
이 레퍼런스 설계는 낮은 대기 전력 및 낮은 비용을 위해 설계되었습니다. 이 설계는 UCC287508 절연 플라이백 컨트롤러를 특징으로 하며, 85VAC~400VAC의 매우 넓은 입력 전압 범위에서 작동하여 1.25A에서 절연된 12V 출력을 제공합니다.
TIDA-010257 — 10kW Vienna 정류기 기반, 3상 역률 보정 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.