首頁 無線連線 汽車無線連線產品
首頁
無線連線
汽車無線連線產品

CC2340R5-Q1

現行

具有 512kB 快閃記憶體的車用認證 SimpleLink™ Bluetooth® 低耗能無線 MCU

立即訂購
產品規格表
使用指南

CC2340R5-Q1

現行
產品規格表 立即訂購

產品詳細資料

Type Wireless MCU Technology 2.4 GHz, Bluetooth® LE Protocols Qualified against Bluetooth® Core 5.4 CPU Arm Cortex-M0+ Flash memory (kByte) 512 RAM (kByte) 36, 64 Number of GPIOs 19 TX power (max) (dBm) 8 Features AEC-Q100 Grade 2 qualified, DC/DC, Integrated balun, LE 1M PHY, LE 2M PHY, LE Coded PHY (long range), OAD Peripherals 1 SPI, 1 UART, 1 comparator, 12-bit ADC 8-channel, 4 timers, I2C, Integrated battery monitor, Integrated temperature monitor, Real-time clock (RTC) Security Cryptographic acceleration, ISO21434 automotive cybersecurity compliant Cryptographic accelerators AES, RNG Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category CS
Type Wireless MCU Technology 2.4 GHz, Bluetooth® LE Protocols Qualified against Bluetooth® Core 5.4 CPU Arm Cortex-M0+ Flash memory (kByte) 512 RAM (kByte) 36, 64 Number of GPIOs 19 TX power (max) (dBm) 8 Features AEC-Q100 Grade 2 qualified, DC/DC, Integrated balun, LE 1M PHY, LE 2M PHY, LE Coded PHY (long range), OAD Peripherals 1 SPI, 1 UART, 1 comparator, 12-bit ADC 8-channel, 4 timers, I2C, Integrated battery monitor, Integrated temperature monitor, Real-time clock (RTC) Security Cryptographic acceleration, ISO21434 automotive cybersecurity compliant Cryptographic accelerators AES, RNG Rating Automotive Operating temperature range (°C) -40 to 125 TI functional safety category CS
VQFN (RHB) 32 25 mm² (5 mm × 5 mm)

Wireless microcontroller

  • AEC-Q100 Grade 2 qualified for automotive applications
  • Optimized 48MHz Arm Cortex-M0+ processor
  • 512KB of in-system programmable flash
  • 12KB of ROM for bootloader and drivers

  • 2.4GHz RF transceiver compatible with Bluetooth 5.4 Low Energy

  • Up to 64KB of ultra-low leakage SRAM. Full RAM retention in standby mode

  • Integrated balun
  • Supports over-the-air upgrade (OTA)
  • Serial wire debug (SWD)

Low power consumption

  • MCU consumption:
    • 2.6mA active mode, CoreMark
    • 53µA/MHz running CoreMark
    • < 710nA standby mode, RTC, 64KB RAM
    • 165nA shutdown mode, wake-up on pin
  • Radio consumption:
    • 5.3mA RX
    • 5.1mA TX at 0dBm
    • < 11.0mA TX at +8dBm

Wireless protocol support

High-performance radio

  • –102dBm for Bluetooth® Low Energy 125kbps
  • –96.5dBm for Bluetooth® Low Energy 1Mbps
  • Output power up to +8dBm with temperature compensation

Regulatory compliance

  • Suitable for systems targeting compliance with these standards:
    • EN 300 328 (Europe)
    • FCC CFR47 Part 15
    • ARIB STD-T66 (Japan)

MCU peripherals

  • 19 I/O Pads
    • 2 IO pads SWD, muxed with GPIOs
    • 2 IO pads LFXT, muxed with GPIOs
    • 15 DIOs (analog or digital IOs)
  • 3 × 16-bit and 1× 24-bit general-purpose timers, quadrature decode mode support
  • 12-bit ADC, 1.2Msps with external reference, 267ksps with internal reference, eight external ADC inputs
  • 1× low-power comparator
  • 1× UART
  • 1× SPI
  • 1× I2C
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor
  • Watchdog timer

Security enablers

  • AES 128-bit cryptographic accelerator
  • Random number generator from on-chip analog noise

Product Cybersecurity Compliance

  • ISO 21434 compliant (Cybersecurity Assurance Level 2)
  • Developed for cybersecurity-relevant applications
  • Documentation available to aid cybersecurity system design

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.71V to 3.8V single supply voltage
  • Tj: –40 to +125°C
  • HBM ESD Classification Level 2 (ESD CDM level 1C on RF pin, per AEC-Q100 Rev. J)
  • CDM ESD Classification Level 2A (ESD CDM level C1 on RF pin, per AEC-Q100 Rev. J)

RoHS-compliant package

  • 5mm × 5mm RHB QFN32 with wettable flanks (19 GPIOs)

Wireless microcontroller

  • AEC-Q100 Grade 2 qualified for automotive applications
  • Optimized 48MHz Arm Cortex-M0+ processor
  • 512KB of in-system programmable flash
  • 12KB of ROM for bootloader and drivers

  • 2.4GHz RF transceiver compatible with Bluetooth 5.4 Low Energy

  • Up to 64KB of ultra-low leakage SRAM. Full RAM retention in standby mode

  • Integrated balun
  • Supports over-the-air upgrade (OTA)
  • Serial wire debug (SWD)

Low power consumption

  • MCU consumption:
    • 2.6mA active mode, CoreMark
    • 53µA/MHz running CoreMark
    • < 710nA standby mode, RTC, 64KB RAM
    • 165nA shutdown mode, wake-up on pin
  • Radio consumption:
    • 5.3mA RX
    • 5.1mA TX at 0dBm
    • < 11.0mA TX at +8dBm

Wireless protocol support

High-performance radio

  • –102dBm for Bluetooth® Low Energy 125kbps
  • –96.5dBm for Bluetooth® Low Energy 1Mbps
  • Output power up to +8dBm with temperature compensation

Regulatory compliance

  • Suitable for systems targeting compliance with these standards:
    • EN 300 328 (Europe)
    • FCC CFR47 Part 15
    • ARIB STD-T66 (Japan)

MCU peripherals

  • 19 I/O Pads
    • 2 IO pads SWD, muxed with GPIOs
    • 2 IO pads LFXT, muxed with GPIOs
    • 15 DIOs (analog or digital IOs)
  • 3 × 16-bit and 1× 24-bit general-purpose timers, quadrature decode mode support
  • 12-bit ADC, 1.2Msps with external reference, 267ksps with internal reference, eight external ADC inputs
  • 1× low-power comparator
  • 1× UART
  • 1× SPI
  • 1× I2C
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor
  • Watchdog timer

Security enablers

  • AES 128-bit cryptographic accelerator
  • Random number generator from on-chip analog noise

Product Cybersecurity Compliance

  • ISO 21434 compliant (Cybersecurity Assurance Level 2)
  • Developed for cybersecurity-relevant applications
  • Documentation available to aid cybersecurity system design

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.71V to 3.8V single supply voltage
  • Tj: –40 to +125°C
  • HBM ESD Classification Level 2 (ESD CDM level 1C on RF pin, per AEC-Q100 Rev. J)
  • CDM ESD Classification Level 2A (ESD CDM level C1 on RF pin, per AEC-Q100 Rev. J)

RoHS-compliant package

  • 5mm × 5mm RHB QFN32 with wettable flanks (19 GPIOs)

The SimpleLink™CC2340R5-Q1 device is an AEC-Q100 compliant wireless microcontroller (MCU) targeting Bluetooth 5 Low Energy automotive applications. The device is optimized for low-power wireless communication in applications such as tire pressure monitoring systems (TPMS), car access, including key fobs used in passive entry passive start (PEPS) and remote keyless entry (RKE), cable replacement, and smartphone connectivity. The highlighted features of this device include:

  • Support for Bluetooth 5 features: high-speed mode (2Mbps PHY), long-range (LE Coded 125kbps and 500kbps PHYs), privacy 1.2.1 and channel selection algorithm #2, as well as backward compatibility and support for key features from the Bluetooth 4.2 and earlier Low Energy specifications.
  • Fully qualified Bluetooth 5.4 software protocol stack included with the SimpleLink™ CC23xx Software Development Kit (SDK)
  • Ultra-low standby current less than 0.71µA with RTC operational and full RAM retention that enables significant battery life extension, especially for applications with longer sleep intervals.
  • Integrated balun for reduced bill-of-material (BOM) board layout
  • Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth Low Energy (–102dBm for 125kbps LE Coded PHY, with integrated balun)

The CC2340R5-Q1 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

The SimpleLink™CC2340R5-Q1 device is an AEC-Q100 compliant wireless microcontroller (MCU) targeting Bluetooth 5 Low Energy automotive applications. The device is optimized for low-power wireless communication in applications such as tire pressure monitoring systems (TPMS), car access, including key fobs used in passive entry passive start (PEPS) and remote keyless entry (RKE), cable replacement, and smartphone connectivity. The highlighted features of this device include:

  • Support for Bluetooth 5 features: high-speed mode (2Mbps PHY), long-range (LE Coded 125kbps and 500kbps PHYs), privacy 1.2.1 and channel selection algorithm #2, as well as backward compatibility and support for key features from the Bluetooth 4.2 and earlier Low Energy specifications.
  • Fully qualified Bluetooth 5.4 software protocol stack included with the SimpleLink™ CC23xx Software Development Kit (SDK)
  • Ultra-low standby current less than 0.71µA with RTC operational and full RAM retention that enables significant battery life extension, especially for applications with longer sleep intervals.
  • Integrated balun for reduced bill-of-material (BOM) board layout
  • Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth Low Energy (–102dBm for 125kbps LE Coded PHY, with integrated balun)

The CC2340R5-Q1 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub1GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.
filter 尋找其它 汽車無線連線產品
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 17
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 CC2340R5-Q1 SimpleLink™ Bluetooth® Low Energy Wireless MCU datasheet (Rev. A) PDF | HTML 2025/7/30
* 使用指南 CC23xx SimpleLink Wireless MCU Technical Reference Manual (Rev. A) PDF | HTML 2024/8/7
* 勘誤表 CC2340R5-Q1 SimpleLink Wireless MCU Device Revision B Errata (Rev. B) PDF | HTML 2025/7/16
應用說明 RNG Compliance report for NIST SP800-90A PDF | HTML 2026/7/13
應用說明 Configuration methods for BQB RF-PHY testing and SRRC fixed frequency testing for TI Bluetooth products (Rev. A) PDF | HTML 2026/5/29
網路安全諮詢 Invalid Bluetooth® LE Data Length Extension (DLE) Parameter Leading to DoS PDF | HTML 2026/5/28
網路安全諮詢 Denial of Service during Bluetooth LE authentication and connection PDF | HTML 2026/5/28
應用說明 CC234x and CC27xx Hardware Configuration and PCB Design Considerations (Rev. A) PDF | HTML 2026/2/4
應用說明 AN103 -- Basic RF Testing of CCxxxx Devices (Rev. A) PDF | HTML 2025/12/11
應用說明 How to Certify Your Bluetooth Product (Rev. N) PDF | HTML 2025/11/18
應用說明 High Accuracy, Low Cost, Secure Ranging with Bluetooth Channel Sounding PDF | HTML 2024/2/27
應用說明 CC2340 Bluetooth LE Software Product Brief (Rev. A) PDF | HTML 2023/11/6
應用說明 Hardware Migration to CC2340R5 PDF | HTML 2023/5/9
證書 LP-EM-CC2340R5 EU RoHS Declaration of Conformity (DoC) (Rev. A) 2023/4/28
應用說明 Antenna Impedance Measurement and Matching PDF | HTML 2022/3/22
應用說明 RF PCB Simulation Cookbook 2019/1/9
應用說明 CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) PDF | HTML 2017/10/2

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP-EM-CC2340R5 — 適用於 SimpleLink™ Bluetooth® 5.3 低耗能 MCU 的 CC2340R5 LaunchPad™ 開發套件

此 LaunchPad 開發套件可藉由支援 Bluetooth 5 低耗能 (LE) 及 2.4-GHz 專利通訊協定的 SimpleLink Bluetooth 低耗能 MCU 加快開發速度。軟體支援由 SimpleLink 低功率 F3 軟體開發套件 (SDK) 提供。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

LP-XDS110 — XDS110 LaunchPad™ 開發套件偵錯器

The LP-XDS110 LaunchPad 開發套件偵錯器，是可對德州儀器 (TI) 微控制器、微處理器和 DSP XDS 相容產品進行編程和偵錯的工具。The LP-XDS110 設計為透過 20 針腳邊緣連接器直接連接到分離式 Launchpad，也可用於對其他使用 XDS110 OUT 連接器的 LaunchPad 和 XDS 相容裝置進行偵錯。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

LP-XDS110ET — 具有 EnergyTrace™ 軟體的 XDS110ET LaunchPad™ 開發套件偵錯器

LP-XDS110ET LaunchPad 開發套件偵錯器可用於對德州儀器 (TI) 微控制器、微處理器和 DSP XDS 相容裝置進行編程和偵錯。LP-XDS110ET 設計為透過 20 針腳邊緣連接器直接連接到分離式 Launchpad 開發套件，也可用於對其他使用 XDS110 OUT 連接器的 LaunchPad 開發套件和 XDS 相容裝置進行偵錯。LP-XDS110ET 增加了功率量測電路、可支援 EnergyTrace™ 軟體。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

RFSTAR-3P-AUTO-BLE-MODULES — 以 CC2642R-Q1 CC2340R5-Q1 為基礎的 RF-STAR 汽車 BLE 模組

RF-star 超過十年來均是 TI 的無線連線模組第三方 IDH，專門供應以 TI 產品為基礎的各種無線模組及解決方案，例如 BLE、Matter、ZigBee、Thread、Wi-Fi、Sub-1G 與 Wi-SUN。 
RF-BM-2340QB1 是汽車 Bluetooth® 5.3 低功耗模組，以符合 AEC-Q100 標準的 MCU CC2340R5-Q1 為基礎。RF-BM-2642QB1I 和 RF-BM-2642QB1 是汽車 Bluetooth® 5.2 低功耗模組，以符合 AEC-Q100 標準的 MCU CC2642R-Q1 為基礎。其可在 -40℃ 至 105℃ (...)

從：Shenzhen RF-star Technology Co., Ltd.
支援產品和硬體
開發套件

TTC-3P-AUTO-MODULES — TTC automotive Bluetooth Low Energy modules

HY-42Q101 Bluetooth low energy single mode module is for AEC-Q100 qualified automotive 
applications, automotive device specification temperature Grade 2: ( –40°C to +105°C), 

HY-42Q101 is a single mode device, targeted for low-power energy sensors and accessories. 

HY-42Q101 offers all Bluetooth (...)

從：Shenzhen Shengrun Technology Co., Ltd.
支援產品和硬體
偵錯探測器

TMDSEMU110-U — XDS110 JTAG 偵錯探測器

德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別，適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列，可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。  對於針腳上的核心追蹤，則需要 XDS560v2 PRO TRACE。

德州儀器 XDS110 透過 TI 20 針腳連接器（具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器）連接到目標電路板，並透過 USB2.0 (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger

TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)

從：TASKING Germany GmbH
支援產品和硬體
軟體開發套件 (SDK)

TTC-SR-2340080I1Q — TTC SR-2340080I1Q 是具備 BLE RF 發射器的高性能雙工 TMPS 晶片。

SR-2340080I1Q 為一顆高度整合之 TPMS 感測器晶片，包含壓力感測器、溫度感測器、加速度感測器、電池電壓感測器，以及低功耗藍牙功能。
TTC 提供隨附之 SDK 開發套件，使 TPMS 感測器之測量與通訊能由客戶端軟體控管，並協助客戶快速整合。
該 SDK 含括多樣化韌體函式庫與專案範例，範圍自基本 TPMS 功能至複雜之自動定位演算法。

從：Shenzhen Shengrun Technology Co., Ltd.
支援產品和硬體
軟體開發套件 (SDK)

SIMPLELINK-LOWPOWER-F3-SDK — SimpleLink™ Low Power F3 software development kit (SDK) for the CC23xx and CC27xx devices

SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。

支援產品和硬體
軟體開發套件 (SDK)

SIMPLELINK-LOWPOWER-FMNAP — Find My Network Accessory Protocol (FMNAP) Plugin for SimpleLink devices

SimpleLink™ 低功率 SDK 支援 CC13xx、CC23xx、CC26xx 及 CC27xx 產品系列。這些 SDK 搭配可提供適合開發 Sub-1 GHz 與 2.4 GHz 應用的全方位軟體套件，包括在 SimpleLink CC13xx、CC23xx、CC26xx 和 CC27xx 無線 MCU 上支援 Bluetooth® 低功耗、網狀網路、Zigbee®、Matter、Thread、802.15.4 型、專有與多協定解決方案。

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO-OPENOCD — OpenOCD Binary Releases

Pre-built binaries for the popular open-source OpenOCD debug stack.
支援產品和硬體
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.

SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)

支援產品和硬體
線上培訓

SIMPLELINK-ACADEMY-CC23XX — Simplelink™ CC23xx Academy

SimpleLink™ Academy is an interactive learning experience for TI's wireless protocols. Our hands-on training modules cover all phases of development for LaunchPad™ development kits alongside software development kits (SDKs) in the SimpleLink MCU family.
支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
支援軟體

SMARTRF-STUDIO-8 — 適用於 CC23xx 和 CC27xx 裝置以及 CC140xP 收發器的 SmartRF Studio 8 應用軟體

SmartRF™ Studio 是一款 Windows 應用程式，功用在於協助射頻系統的設計人員在為所有 TI CC1xxx 及 CC2xxx 低功耗射頻裝置設計過程中，能在早期階段輕鬆評估無線電。此程式簡化了配置暫存器值和命令的產生，以及射頻系統的實際測試和除錯。

SmartRF Studio 支援下列 TI 裝置：

 

資源

支援產品和硬體
計算工具

BT-POWER-CALC — Bluetooth Power Calculator for CC13xx, CC26xx, CC23xx, and CC27xx devices

This tool is used to calculate Bluetooth Low Energy power consumption estimates for various use cases on TI Bluetooth devices. The calculator includes both advertising and peripheral use cases with the ability to configure different use case profile parameters. The calculator outputs an estimate (...)
支援產品和硬體
設計工具

SIMPLELINK-2-4GHZ-DESIGN-REVIEW — Hardware Design Review Request Form for SimpleLink™ CC2xxx Devices

SimpleLink 硬體設計審核流程提供一對一接觸的方式，並由主題內容專家協助審查您的設計，提供您寶貴的意見。一個簡單的三步驟流程用於請求審查，以及相關技術文件和資源的連結，可在此處找到。

入門指南

一般設計問題應張貼在我們的 E2E 討論區中，然後才能要求 2.4 GHz 硬體設計審查。

請確實備妥下列必要文件，隨硬體設計審查申請表一起傳送：

  • 確認產品頁上提供的所有硬體文件均已經過審查，例如產品規格表、設計指南、使用指南和其他硬體資源
  • 電路圖的可攜式文件格式 (PDF) 版本可供檢閱
  • 物料清單 (BOM) 可供檢閱
  • 堆疊詳細資料可供檢閱
  • 電路板設計的 Gerber 檔案 (含零件位置和參考指示項) (...)
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RHB) 32 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片