首頁 介面 PCIe、SAS & SATA IC
首頁
介面
PCIe、SAS & SATA IC

DS160PR410

現行

4 通道 PCI Express gen-4 線性轉接驅動器

立即訂購
產品規格表

DS160PR410

現行
產品規格表 立即訂購

產品詳細資料

Type Redriver Protocols CXL, PCIe1, PCIe2, PCIe3, PCIe4, UPI Applications CXL, PCIe, UPI Number of channels 4 Speed (max) (Gbps) 25 Supply voltage (V) 3.3 Rating Catalog Operating temperature range (°C) -40 to 85
Type Redriver Protocols CXL, PCIe1, PCIe2, PCIe3, PCIe4, UPI Applications CXL, PCIe, UPI Number of channels 4 Speed (max) (Gbps) 25 Supply voltage (V) 3.3 Rating Catalog Operating temperature range (°C) -40 to 85
WQFN (RNQ) 40 24 mm² 6 x 4
  • Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0/4.0 up to 16 Gbps interfaces
  • CTLE boosts up to 18 dB at 8 GHz helps to extend channel reach
  • Automatic receiver detection for PCIe use cases
  • Protocol agnostic linear redriver allows seamless support for PCIe link training
  • Supports data rates up to 25 Gbps including Ultra Path Interconnect (UPI)
  • Ultra-low latency of 70 ps (typical)
  • Low additive random jitter of 60 fs (typical) with PRBS data
  • Single 3.3 V supply
  • Low active power of 124 mW/channel (typical) - no heat sink required
  • Pin-strap, SMBus or EEPROM programming
  • Support for x2, x4, x8, x16 PCIe bus width with one or multiple DS160PR410
  • Industrial temperature range of –40ºC to 85ºC
  • 4.0 mm × 6.0 mm, 40 pin WQFN package
  • Quad-channel linear equalizer supporting PCIe 1.0/2.0/3.0/4.0 up to 16 Gbps interfaces
  • CTLE boosts up to 18 dB at 8 GHz helps to extend channel reach
  • Automatic receiver detection for PCIe use cases
  • Protocol agnostic linear redriver allows seamless support for PCIe link training
  • Supports data rates up to 25 Gbps including Ultra Path Interconnect (UPI)
  • Ultra-low latency of 70 ps (typical)
  • Low additive random jitter of 60 fs (typical) with PRBS data
  • Single 3.3 V supply
  • Low active power of 124 mW/channel (typical) - no heat sink required
  • Pin-strap, SMBus or EEPROM programming
  • Support for x2, x4, x8, x16 PCIe bus width with one or multiple DS160PR410
  • Industrial temperature range of –40ºC to 85ºC
  • 4.0 mm × 6.0 mm, 40 pin WQFN package

The DS160PR410 is a four channel low-power high-performance linear repeater/redriver designed to support PCI Express (PCIe) Generation 1.0, 2.0, 3.0 and 4.0. The device is a protocol agnostic linear redriver that can operate for interfaces up to 25 Gbps including Ultra Path Interface (UPI) 2.0.

The DS160PR410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of DS160PR410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I2C), direct loading from an external EEPROM, or by using pin control. In EEPROM mode, the configurations are automatically loaded on power up, eliminating the need for an external microprocessor or software driver.

The DS160PR410 is a four channel low-power high-performance linear repeater/redriver designed to support PCI Express (PCIe) Generation 1.0, 2.0, 3.0 and 4.0. The device is a protocol agnostic linear redriver that can operate for interfaces up to 25 Gbps including Ultra Path Interface (UPI) 2.0.

The DS160PR410 receivers deploy continuous time linear equalizers (CTLE) to provide a programmable high-frequency boost. The equalizer can open an input eye that is completely closed due to inter-symbol interference (ISI) induced by an interconnect medium, such as PCB traces. The CTLE receiver is followed by a linear output driver. The linear datapaths of DS160PR410 preserve transmit preset signal characteristics. The linear redriver becomes part of the passive channel that as a whole get link trained for best transmit and receive equalization settings. This transparency in the link training protocol result in best electrical link and lowest possible latency. The programmable equalization of the device along with its linear datapaths maximizes the flexibility of physical placement within the interconnect channel and improves overall channel performance.

The programmable settings can be applied easily through software (SMBus or I2C), direct loading from an external EEPROM, or by using pin control. In EEPROM mode, the configurations are automatically loaded on power up, eliminating the need for an external microprocessor or software driver.
open-in-new 尋找其它 PCIe、SAS & SATA IC
下載 觀看有字幕稿的影片 影片

更多資訊

IBIS 模型和其他設計資源現已提供。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的產品不同
DS160PR810 現行 PCIe® 4.0、16 Gbps、8 通道線性轉接驅動器 Redriver for 8-channel vs 4-channel
DS160PR822 現行 具有 4 個 2x2 交叉點多工器的 PCIe® 4.0 16-Gbps 8 通道線性驅動器 Redriver with integrated mux
DS160UP822 現行 具有 2x2 交叉點多工器的 UPI 2.0 16-Gbps 8 通道線性轉接驅動器 Redriver with integrated mux
功能相似於所比較的產品
DS160PT801 現行 PCIe® 4.0 16-Gbps 8 通道 (16 通道) 重定時器 x8 retimer provides longer reach extension
TMUXHS4412 現行 4 通道 20 Gbps 差動 2:1/1:2 多工器/解多工器 Passive mux version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 11
類型 標題 日期
* Data sheet DS160PR410 Quad Channel PCI Express 4.0 Linear Redriver datasheet (Rev. A) PDF | HTML 2019年 12月 19日
User guide CEM2SLIMSAS-EVM Adapter Board User's Guide (Rev. A) 2021年 9月 1日
User guide DS160PR410EVM-RSC Evaluation Module (EVM) (Rev. B) 2021年 8月 31日
User guide DS160PR410EVM-SMA Evaluation Module (EVM) (Rev. B) 2021年 8月 31日
Application note How to Tune DS160PR410 for Best Signal Integrity (Rev. A) 2021年 8月 30日
White paper Signal Conditioners for Reliable and Robust Industrial High Speed Links PDF | HTML 2021年 6月 2日
Certificate DS160PR410EVM-RSC EU Declaration of Conformity (DoC) 2020年 4月 21日
Certificate DS160PR410EVM-SMA EU Declaration of Conformity (DoC) 2020年 4月 21日
User guide DS160PR410 Programming Guide 2019年 8月 5日
Application note Understanding EEPROM Programming for DS160PR410 PCI-Express Gen-4 Redriver 2019年 8月 5日
Technical article Signal Conditioning functions go mainstream in PCI Express Gen 4 PDF | HTML 2018年 1月 29日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

CEM2SLIMSAS-EVM — CEM-to-SlimSAS PCI-Express®4.0 轉接卡評估模組

CEM2SLIMSAS-EVM is a PCI-Express 4.0 x16 to two x8 SlimSAS (SFF-8654) adapter. It enables DS160PR810EVM-RSC and other Texas Instruments PCI-Express 4.0 redriver or retimer riser card evaluation modules to interface to up to four U.2 solid state drives (SSDs) using comercially available SlimSAS (...)
使用指南: PDF
TI.com 無法提供
開發板

DS160PR410EVM-RSC — 四通道 PCI-express gen-4 線性轉接驅動器評估模組

The DS160PR410EVM-RSC evaluation module (EVM) provides a complete high-bandwidth platform for evaluating the signal conditioning features of the Texas Instruments DS160PR410 PCI-Express linear redriver. It features eight DS160PR410 devices that can extend the transmission distance of a PCIe 4.0 (...)
使用指南: PDF
TI.com 無法提供
開發板

DS160PR410EVM-SMA — 四通道 PCI-express gen-4 線性轉接驅動器評估模組

Quad-channel PCI-express gen-4 linear redriver evaluation module (EVM)
使用指南: PDF
TI.com 無法提供
開發模組 (EVM) 的 GUI

SIGCONARCHITECT3 — Texas Instruments SigCon Architect EVM GUI vV3.0.0.14 Setup

lock = 需要匯出核准 (1 分鐘)
支援產品和硬體

支援產品和硬體

產品
PCIe、SAS & SATA IC
DS160PR410 — 4 通道 PCI Express gen-4 線性轉接驅動器 DS160PR412 — 具有整合式 1:2 多工器的 PCIe® 4.0、16-Gbps、4 通道線性轉接驅動器 DS160PR421 — 具整合式 2:1 多工器的 PCIe® 4.0 16-Gbps 4 通道線性轉接驅動器 DS160PR810 — PCIe® 4.0、16 Gbps、8 通道線性轉接驅動器 DS160PR822 — 具有 4 個 2x2 交叉點多工器的 PCIe® 4.0 16-Gbps 8 通道線性驅動器 DS160PT801 — PCIe® 4.0 16-Gbps 8 通道 (16 通道) 重定時器 DS160UP822 — 具有 2x2 交叉點多工器的 UPI 2.0 16-Gbps 8 通道線性轉接驅動器 DS320PR810 — PCIe® 5.0 32-Gbps、8 通道線性轉接驅動器 DS320PR822 — 具四個 2x2 交叉點多工器的 PCIe® 5.0、32-Gbps、8 通道線性轉接驅動器 SN75LVPE3410 — PCIe® 3.0 8-Gbps 4 通道線性轉接驅動器 TMUXHS4412 — 4 通道 20 Gbps 差動 2:1/1:2 多工器/解多工器
硬體開發
開發模組 (EVM) 的 GUI
SIGCONARCHITECT — SigCon Architect 公用程式工具
lock 下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
封裝 引腳 下載
WQFN (RNQ) 40 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 資格摘要
  • 進行中可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片