首頁 微控制器 (MCU) 與處理器 Microcontrollers Low-power MCUs
首頁
微控制器 (MCU) 與處理器
Microcontrollers
Low-power MCUs

MSP430F5528

現行

具 128KB 快閃記憶體、8KB SRAM、12 位元 ADC、比較器、DMA、UART/SPI/I2C、USB、HW 倍頻器的 25 MHz MCU

立即訂購
產品規格表

MSP430F5528

現行
產品規格表 立即訂購

產品詳細資料

CPU MSP430 Frequency (MHz) 25 Flash memory (kByte) 128 RAM (kByte) 8 ADC type 12-bit SAR Features Real-time clock UART 2 Security Secure debug Number of ADC channels 10 SPI 4 USB Yes Hardware accelerators 0 Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI, UART, USB Operating system BareMetal (No OS), TI RTOS Nonvolatile memory (kByte) 128 Number of GPIOs 47 Number of I2Cs 2
CPU MSP430 Frequency (MHz) 25 Flash memory (kByte) 128 RAM (kByte) 8 ADC type 12-bit SAR Features Real-time clock UART 2 Security Secure debug Number of ADC channels 10 SPI 4 USB Yes Hardware accelerators 0 Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI, UART, USB Operating system BareMetal (No OS), TI RTOS Nonvolatile memory (kByte) 128 Number of GPIOs 47 Number of I2Cs 2
VQFN (RGC) 64 81 mm² (9 mm × 9 mm) NFBGA (ZXH) 80 25 mm² (5 mm × 5 mm) DSBGA (YFF) 64 12.95999999999999712000000000000016 mm² (— mm × — mm)
  • Low supply voltage range: 3.6 V down to 1.8 V
  • Ultra-low power consumption
    • Active mode (AM):
      • All system clocks active:
        • 290 µA/MHz at 8 MHz, 3.0 V, flash program execution (typical)
        • 150 µA/MHz at 8 MHz, 3.0 V, RAM program execution (typical)
    • Standby mode (LPM3):
      • Real-time clock (RTC) with crystal, watchdog, and supply supervisor operational, full RAM retention, fast wakeup:
        • 1.9 µA at 2.2 V, 2.1 µA at 3.0 V (typical)
      • Low-power oscillator (VLO), general-purpose counter, watchdog, and supply supervisor operational, full RAM retention, fast wakeup:
        • 1.4 µA at 3.0 V (typical)
    • Off mode (LPM4):
      • Full RAM retention, supply supervisor operational, fast wakeup:
        • 1.1 µA at 3.0 V (typical)
    • Shutdown mode (LPM4.5):
      • 0.18 µA at 3.0 V (typical)
  • Wake up from standby mode in 3.5 µs (typical)
  • 16-bit RISC architecture, extended memory, up to 25-MHz system clock
  • Flexible power-management system
    • Fully integrated LDO with programmable regulated core supply voltage
    • Supply voltage supervision, monitoring, and brownout
  • Unified clock system
    • FLL control loop for frequency stabilization
    • Low-power low-frequency internal clock source (VLO)
    • Low-frequency trimmed internal reference source (REFO)
    • 32-kHz watch crystals (XT1)
    • High-frequency crystals up to 32 MHz (XT2)
  • 16-bit timer TA0, Timer_A with five capture/compare registers
  • 16-bit timer TA1, Timer_A with three capture/compare registers
  • 16-bit timer TA2, Timer_A with three capture/compare registers
  • 16-bit timer TB0, Timer_B with seven capture/compare shadow registers
  • Two universal serial communication interfaces (USCIs)
    • USCI_A0 and USCI_A1 each support:
      • Enhanced UART supports automatic baud-rate detection
      • IrDA encoder and decoder
      • Synchronous SPI
    • USCI_B0 and USCI_B1 each support:
      • I2C
      • Synchronous SPI
  • Full-speed universal serial bus (USB)
    • Integrated USB-PHY
    • Integrated 3.3-V and 1.8-V USB power system
    • Integrated USB-PLL
    • Eight input and eight output endpoints
  • 12-bit analog-to-digital converter (ADC) (MSP430F552x only) with internal reference, sample-and-hold, and autoscan features
  • Comparator
  • Hardware multiplier supports 32-bit operations
  • Serial onboard programming, no external programming voltage needed
  • 3-channel internal DMA
  • Basic timer with RTC feature
  • Development tools and software (also see Tools and Software)
  • Device Comparison summarizes the available family members
  • Low supply voltage range: 3.6 V down to 1.8 V
  • Ultra-low power consumption
    • Active mode (AM):
      • All system clocks active:
        • 290 µA/MHz at 8 MHz, 3.0 V, flash program execution (typical)
        • 150 µA/MHz at 8 MHz, 3.0 V, RAM program execution (typical)
    • Standby mode (LPM3):
      • Real-time clock (RTC) with crystal, watchdog, and supply supervisor operational, full RAM retention, fast wakeup:
        • 1.9 µA at 2.2 V, 2.1 µA at 3.0 V (typical)
      • Low-power oscillator (VLO), general-purpose counter, watchdog, and supply supervisor operational, full RAM retention, fast wakeup:
        • 1.4 µA at 3.0 V (typical)
    • Off mode (LPM4):
      • Full RAM retention, supply supervisor operational, fast wakeup:
        • 1.1 µA at 3.0 V (typical)
    • Shutdown mode (LPM4.5):
      • 0.18 µA at 3.0 V (typical)
  • Wake up from standby mode in 3.5 µs (typical)
  • 16-bit RISC architecture, extended memory, up to 25-MHz system clock
  • Flexible power-management system
    • Fully integrated LDO with programmable regulated core supply voltage
    • Supply voltage supervision, monitoring, and brownout
  • Unified clock system
    • FLL control loop for frequency stabilization
    • Low-power low-frequency internal clock source (VLO)
    • Low-frequency trimmed internal reference source (REFO)
    • 32-kHz watch crystals (XT1)
    • High-frequency crystals up to 32 MHz (XT2)
  • 16-bit timer TA0, Timer_A with five capture/compare registers
  • 16-bit timer TA1, Timer_A with three capture/compare registers
  • 16-bit timer TA2, Timer_A with three capture/compare registers
  • 16-bit timer TB0, Timer_B with seven capture/compare shadow registers
  • Two universal serial communication interfaces (USCIs)
    • USCI_A0 and USCI_A1 each support:
      • Enhanced UART supports automatic baud-rate detection
      • IrDA encoder and decoder
      • Synchronous SPI
    • USCI_B0 and USCI_B1 each support:
      • I2C
      • Synchronous SPI
  • Full-speed universal serial bus (USB)
    • Integrated USB-PHY
    • Integrated 3.3-V and 1.8-V USB power system
    • Integrated USB-PLL
    • Eight input and eight output endpoints
  • 12-bit analog-to-digital converter (ADC) (MSP430F552x only) with internal reference, sample-and-hold, and autoscan features
  • Comparator
  • Hardware multiplier supports 32-bit operations
  • Serial onboard programming, no external programming voltage needed
  • 3-channel internal DMA
  • Basic timer with RTC feature
  • Development tools and software (also see Tools and Software)
  • Device Comparison summarizes the available family members

The Texas Instruments MSP430F55xx microcontrollers (MCUs) are part of the MSP430™ system control & communication family of ultra-low-power microcontrollers consists of several devices featuring peripheral sets targeted for a variety of applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The microcontroller features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in 3.5 µs (typical).

The MSP430F5529, MSP430F5527, MSP430F5525, and MSP430F5521 microcontrollers have integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance 12-bit analog-to-digital converter (ADC), two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 63 I/O pins. The MSP430F5528, MSP430F5526, MSP430F5524, and MSP430F5522 microcontrollers include all of these peripherals but have 47 I/O pins.

The MSP430F5519, MSP430F5517, and MSP430F5515 microcontrollers have integrated USB and PHY supporting USB 2.0, four 16-bit timers, two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 63 I/O pins. The MSP430F5514 and MSP430FF5513 microcontrollers include all of these peripherals but have 47 I/O pins.

Typical applications include analog and digital sensor systems, data loggers, and others that require connectivity to various USB hosts.

The MSP430F55xx MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits include the MSP430F5529 USB LaunchPad™ development kit and the MSP430F5529 experimenter’s board as well as the MSP-TS430PN80USB 80-pin target development board and the MSP-TS430RGC64USB 64-pin target development board. TI also provides free MSP430Ware™ software, which is available as a component of Code Composer Studio™ IDE desktop and cloud versions within TI Resource Explorer. The MSP430 MCUs are also supported by extensive online collateral, training, and online support through the TI E2E™ support forum.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User’s Guide.

The Texas Instruments MSP430F55xx microcontrollers (MCUs) are part of the MSP430™ system control & communication family of ultra-low-power microcontrollers consists of several devices featuring peripheral sets targeted for a variety of applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The microcontroller features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in 3.5 µs (typical).

The MSP430F5529, MSP430F5527, MSP430F5525, and MSP430F5521 microcontrollers have integrated USB and PHY supporting USB 2.0, four 16-bit timers, a high-performance 12-bit analog-to-digital converter (ADC), two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 63 I/O pins. The MSP430F5528, MSP430F5526, MSP430F5524, and MSP430F5522 microcontrollers include all of these peripherals but have 47 I/O pins.

The MSP430F5519, MSP430F5517, and MSP430F5515 microcontrollers have integrated USB and PHY supporting USB 2.0, four 16-bit timers, two USCIs, a hardware multiplier, DMA, an RTC module with alarm capabilities, and 63 I/O pins. The MSP430F5514 and MSP430FF5513 microcontrollers include all of these peripherals but have 47 I/O pins.

Typical applications include analog and digital sensor systems, data loggers, and others that require connectivity to various USB hosts.

The MSP430F55xx MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits include the MSP430F5529 USB LaunchPad™ development kit and the MSP430F5529 experimenter’s board as well as the MSP-TS430PN80USB 80-pin target development board and the MSP-TS430RGC64USB 64-pin target development board. TI also provides free MSP430Ware™ software, which is available as a component of Code Composer Studio™ IDE desktop and cloud versions within TI Resource Explorer. The MSP430 MCUs are also supported by extensive online collateral, training, and online support through the TI E2E™ support forum.

For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User’s Guide.
filter 尋找其它 Low-power MCUs
下載 觀看有字幕稿的影片 影片

更多資訊

造訪 TI 開發人員區以開始進行評估及開發。

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
MSP430F5517 現行 具 96KB 快閃記憶體、6KB SRAM、比較器、DMA、UART/SPI/I2C、USB、定時器、HW 倍頻器的 25 MHz MCU Less memory size, no ADC

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 29
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 MSP430F552x, MSP430F551x Mixed-Signal Microcontrollers datasheet (Rev. P) PDF | HTML 2020/9/11
* 勘誤表 MSP430F5528 Device Erratasheet (Rev. AE) PDF | HTML 2021/6/9
應用說明 Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2025/6/2
應用說明 ESD Diode Current Specification (Rev. B) PDF | HTML 2021/8/23
應用說明 MSP430 System-Level ESD Considerations (Rev. B) PDF | HTML 2021/7/14
使用指南 MSP430 MCUs Development Guide Book (Rev. A) PDF | HTML 2021/5/13
應用說明 MSP430 System ESD Troubleshooting Guide PDF | HTML 2019/12/13
應用說明 Programming a Flash-Based MSP430 MCU Using the JTAG Interface (Rev. H) 2019/3/15
白皮書 The ultra-low-power USB revolution (Rev. A) 2019/2/26
應用說明 Starting a USB Design Using MSP430 MCUs (Rev. B) PDF | HTML 2018/10/19
應用說明 Understanding MSP430 Flash Data Retention (Rev. A) PDF | HTML 2018/8/24
應用說明 Using the TPS3619 With MSP430 Microcontrollers (Rev. B) PDF | HTML 2018/8/6
使用指南 MSP430x5xx and MSP430x6xx Family User's Guide (Rev. Q) 2018/3/15
應用說明 Software Coding Techniques for MSP430™ MCUs (Rev. B) 2018/3/14
應用說明 Solutions to Common eUSCI and USCI Serial Communication Issues on MSP430 MCUs (Rev. A) 2018/3/1
應用說明 Troubleshooting Guidelines for MSP Devices 2017/10/4
應用說明 MSP430 32-kHz Crystal Oscillators (Rev. D) PDF | HTML 2017/7/18
應用說明 Debugging Flash Issues on the MSP430 Family of Microcontrollers (Rev. A) 2017/3/16
應用說明 Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D) 2016/11/3
應用說明 Advanced Debugging Using the Enhanced Emulation Module (EEM) With CCS v6 (Rev. F) 2016/9/6
技術文章 Trends in building automation: connected sensors for user comfort PDF | HTML 2016/9/2
技術文章 Industrial stack lights get smarter with LEDs PDF | HTML 2016/8/9
應用說明 General Oversampling of MSP ADCs for Higher Resolution (Rev. A) PDF | HTML 2016/4/1
功能安全資訊 Safety Manual for MSP430G2xx, F5xx, and FR57xx in IEC 60730 Safety Applications (Rev. A) 2016/1/12
應用說明 MSP Code Protection Features PDF | HTML 2015/12/7
應用說明 Using the USCI I2C Master (Rev. A) 2015/3/11
應用說明 USB Field Firmware Updates on MSP430 MCUs (Rev. C) 2014/11/12
應用說明 Nine-Axis Sensor Fusion Using Direction Cosine Matrix Algorithm on MSP430F5xx (Rev. A) 2012/2/13
應用說明 Implementing a Thermocouple Interface With ADC12_A 2011/7/19

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DRV3901-Q1EVM — DRV3901-Q1 評估模組

DRV3901-Q1 是一款完全整合的裝置，用於驅動 12V 車用系統中的高溫保險絲啟動器。DRV3901-Q1EVM 展示了兩個 DRV3901-Q1 裝置，可靈活測試平行或備援系統。裝置支援高達 28V 的輸入電壓，並在 5V 的邏輯電源電壓下運作。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DRV8214EVM — 適用於具有熄火偵測與漣波計數之有刷 DC 馬達驅動器的 DRV8214 評估模組

DRV8214 評估模組 (EVM) 可用於輕鬆評估 DRV8214 裝置。EVM 已編程並配置為可立即使用並開始轉動馬達。

DRV8214 是一款與 N 通道全橋、電荷泵、電流感測輸出、電流調節和保護電路整合的馬達驅動器。DRV8214 整合漣波計數技術，可進行無感測器馬達位置監控、熄火偵測，以及速度和電壓調節。三重電荷泵可讓裝置以最低 1.65 V 進行運作來配合 1.8-V 電源軌和低電池電力情況。電荷泵整合了所有電容器，並允許 100% 工作週期運作。EVM 附帶 GUI 以輕鬆控制馬達驅動器。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DRV8234EVM — 適用於具有熄火偵測與漣波計數之有刷 DC 馬達驅動器的 DRV8234 評估模組

DRV8234 評估模組 (EVM) 可用於輕鬆評估 DRV8234 裝置。EVM 已編程並配置為可立即使用並開始轉動馬達。

DRV8234 是一款與 N 通道全橋、電荷泵、電流感測輸出、電流調節和保護電路整合的馬達驅動器。DRV8234 整合漣波計數技術，可進行無感測器馬達位置監控、熄火偵測，以及速度和電壓調節。電荷泵整合了所有電容器，並允許 100% 工作週期運作。EVM 附帶 GUI 以輕鬆控制馬達驅動器。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DRV8235EVM — DRV8235 評估模組

DRV8235 評估模組 (EVM) 可用於輕鬆評估 DRV8235 裝置。EVM 已編程並配置為可立即使用並開始轉動馬達。

DRV8235 是一款與 N 通道全橋、電荷泵、電流感測輸出、電流調節和保護電路整合的馬達驅動器。DRV8235 整合了熄火偵測、速度調節與電壓調節。電荷泵整合了所有電容器，並允許 100% 工作週期運作。EVM 附帶 GUI 以輕鬆控制馬達驅動器。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DRV8242H-Q1EVM — 具硬體介面且適用於汽車 H 橋驅動器的 DRV8242-Q1 評估模組

DRV824x-Q1 系列裝置是完全整合的全橋驅動器，適用於各種汽車應用領域。DRV824x-Q1 裝置可配置為單一全橋驅動器和兩個獨立半橋驅動器。這款採用高效封裝的單體晶粒產品，以我們的高功率 BiCMOS 製程技術節點進行設計，可提供出色的電源處理及熱功能，同時提供精巧封裝尺寸、簡化配置、EMI 控制、準確電流感測、強固性及診斷功能。DRV824x Q1 具有相同的針腳功能和暫存器映射，具有可擴充電阻 (電流能力)，可在最少設計變更的情況下支援不同負載。

此裝置整合 N (...)

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DRV8242S-Q1EVM — 具 SPI 介面且適用於汽車 H 橋驅動器的 DRV8242-Q1 評估模組

DRV824x-Q1 系列裝置是完全整合的全橋驅動器，適用於各種汽車應用領域。DRV824x-Q1 裝置可配置為單一全橋驅動器和兩個獨立半橋驅動器。這款採用高效封裝的單體晶粒產品，以我們的高功率 BiCMOS 製程技術節點進行設計，可提供出色的電源處理及熱功能，同時提供精巧封裝尺寸、簡化配置、EMI 控制、準確電流感測、強固性及診斷功能。DRV824x Q1 具有相同的針腳功能和暫存器映射，具有可擴充電阻 (電流能力)，可在最少設計變更的情況下支援不同負載。

此裝置整合 N (...)

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DRV8262VEVM — 採用 DDV 封裝且適用於單或雙全橋馬達驅動器的 DRV8262 評估模組

DRV8262VEVM 展示了 DRV8262DDVR. 的功能和性能。它整合兩個全橋以驅動兩個 DC 馬達或雙極步進馬達。兩個全橋可並聯，以驅動一個具較高電流的 DC 馬達。

本裝置可透過 4.5V 至 65V 供電範圍運作，並能在並聯時驅動高達 10A 全刻度電流和 20A 電流。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DRV8462VEVM — 採用 DDV 封裝的步進馬達驅動器 DRV8462 評估模組

DRV8462VEVM 展示了 DRV8462DDVR. 的功能和性能。

DRV8462 是完全整合的工業應用步進馬達驅動器。本裝置可在 4.5-V 至 65-V 供電範圍中運作，並可驅動高達 10-A 全刻度電流。其具有許多進階功能，例如自動微型步進、失速檢測、自動扭矩和靜止節能模式。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DRV8962VEVM — 適用於採用 DDV 封裝的四路半橋馬達驅動器的 DRV8962 評估模組

DRV8962VEVM 展示了 DRV8962DDVR. 的功能和性能。對於此裝置，DDV 封裝的電流能力是 DDW 封裝的兩倍。

DRV8962 為四通道半橋式驅動器，每輸出運作範圍為 4.5 V 至 65 V 至 10 A，同時支援各種負載的廣泛負載電流。此裝置整合四個半橋輸出功率級。此裝置也整合充電幫浦穩壓器，可支援高效高壓側 N 通道 MOSFET 和 100% 工作週期運作。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
支援產品和硬體
開發套件

MSP-EXP430F5529LP — 適用 USB 的 MSP430F5529 LaunchPad™ 開發套件

MSP430™ LaunchPad™ 開發套件現在具有 USB。MSP-EXP430F5529LP 是具備成本效益且簡單的開發套件，適用於 MSP430F5529 USB 微控制器。其透過適用於編程與偵錯的板載模擬，以及可做為使用者介面的按鈕與 LED，提供了可輕鬆使用 MSP430 MCU 著手開發的方式。
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

MSP-TS430PN80USB — MSP-TS430PN80USB - 適用於 MSP430F5x MCU 的 80 針腳目標開發基板

The MSP-TS430PN80USB is a standalone 80-pin ZIF socket target board used to program and debug the MSP MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.

Device Support: The MSP-TS430PN80USB development kit supports MSP430F551x and MSP430F552x MCUs in an 80-pin LQFP (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
硬體程式設計工具

MSP-FET — MSP MCU 程式設計工具和偵錯器

MSP-FET 是一款強大的模擬開發工具，通常稱為偵錯探測器，可讓使用者快速展開 MSP 低功耗微控制器 (MCU) 的開始工作。

它支援透過 JTAG 和 SBW 介面進行編程和即時偵錯。此外，MSP-FET 也能在電腦 USB 介面與 MSP UART 間提供後通道 UART 連接。這為 MSP 程式設計工具提供了一種便利的方法，能在 MSP 和電腦上執行的終端之間進行串行通訊。它也支援透過 UART 和 I2C 通訊協定，使用 BSL（自舉式載入程式）將程式（通常稱為韌體）載入到 MSP 目標。

USB 介面可將 MSP-FET 連接至電腦，而 14 針腳連接器則可存取 MSP (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
支援產品和硬體
軟體開發套件 (SDK)

MSP430-SDK — 適用於 MSP430 微控制器的 MSP430-SDK

MSP430-SDK 資源集可協助使用者為 MSP430 微控制器 (MCU) 編寫有效程式碼。這些資源支援所有 MSP430 微控制器。就像有位使用者提到的，「基本上就是讓開發人員擁有成為 MSP430 微控制器專家所需的一切！」

此設計資源集合包括各式各樣的高度抽象軟體函式庫任君選擇，內容包含裝置和週邊設備專用函式庫 (如 MSP430 驅動器函式庫)，乃至圖形與電容式觸控函式庫等應用程式專用函式庫。MSP430 驅動器函式庫尤為重要，其可協助軟體開發人員運用便利的 API 來控制低階複雜的硬體週邊設備，讓產生的程式碼更容易讀取及維護。MSP (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

ENERGYTRACE — EnergyTrace 技術

EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.

As most developers know, it is difficult (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

IAR-KICKSTART — IAR Embedded Workbench

IAR Embedded Workbench delivers a complete development toolchain for building and debugging embedded applications for your selected target microcontroller. The included IAR C/C++ Compiler generates highly optimized code for your application, and the C-SPY Debugger is a fully integrated debugger for (...)

從：IAR Systems
支援產品和硬體
線上培訓

MSP430-ACADEMY — MSP430™ academy

MSP430™ Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSP430 MCU portfolio.
支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
作業系統 (OS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 預先認證的安全 RTOS

SAFERTOS® 是專為嵌入式處理器設計的獨特即時作業系統。經 TÜV SÜD 預先認證，符合 IEC 61508 SIL3 與 ISO 26262 ASILD 標準。SAFERTOS® 是由 WHIS 專家團隊專為安全而打造，適用於全球重要安全應用。WHIS 與德州儀器的合作已經超過十年。在此期間，WHIS 已將 SAFERTOS® 移植至各種 TI 處理器，支援所有熱門核心，並可依要求提供其他架構。SAFERTOS® 專為您的特定處理器/編譯器組合量身打造，隨附完整的原始程式碼與設計保證包，可完全一目了然整個設計生命週期。許多 WHIS 客戶開始使用 FreeRTOS (...)

從：WITTENSTEIN High Integrity Systems
支援產品和硬體
應用軟體及架構

MSP430-IEC60730-SW-PACKAGE — IEC60730 Software Package

The IEC60730 MSP430 software package was developed to be useful in assisting customers in complying with IEC 60730-1:2010 (Automatic Electrical Controls for Household and Similar Use – Part 1: General Requirements) for up to Class B products, which includes home appliances, arc detectors, (...)

支援產品和硬體
應用軟體及架構

MSP430USBDEVPACK — MSP430 USB Developers Package

The USB Developers Package for MSP430 is a software package containing all necessary source code and sample applications required for developing a USB-based MSP430 project. The package only supports MSP430 USB devices.

Note: This software is available as part of MSPWare. If you have downloaded and (...)

支援產品和硬體
程式碼範例或展示

SLAC300 — MSP430F552x C Examples (IAR and CCSv4)

支援產品和硬體
軟體程式設計工具

MSP-GANG-SOFTWARE — MSP-GANG Software

The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
支援產品和硬體
軟體程式設計工具

MSP430-FLASHER — Command Line Programmer for MSP430™ and SimpleLink™ MSP432™ MCUs

MSPFlasher 是開放原始碼、殼層式（命令行）介面，用於透過 JTAG 編程 MSP430™ 和 MSP432™ 微控制器 (MCU)，並提供最常見的編程功能。MSP Flasher 可用於將二進位檔案直接下載至記憶體，無需 CCS 或 IAR 等 IDE。它還可用於擷取韌體和永久鎖定 JTAG 存取。

支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
設計工具

MSP-3P-SEARCH — MSP 第三方搜尋工具

TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

(...)

支援產品和硬體

許多 TI 參考設計包含 MSP430F5528

使用我們的參考設計選擇工具，以檢視並找出最適合您的應用和參數的設計。
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGC) 64 Ultra Librarian
NFBGA (ZXH) 80 Ultra Librarian
DSBGA (YFF) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片