首頁 微控制器 (MCU) 與處理器 Microcontrollers 感測 MCU
首頁
微控制器 (MCU) 與處理器
Microcontrollers
感測 MCU

MSP430FR2522

現行

具有 8 個觸控 IO (16 個感測器)、8 KB FRAM、2 KB SRAM、15 個 IO、10 位元 ADC 的電容式觸控 MCU

立即訂購
產品規格表
使用指南

MSP430FR2522

現行
產品規格表 立即訂購

產品詳細資料

CPU MSP430 Frequency (MHz) 16 Flash memory (kByte) 8 RAM (kByte) 2 ADC type 10-bit SAR Features Advanced sensing, CapTIvate Touch I/O, Real-time clock UART 1 Security Secure debug Number of ADC channels 8 SPI 2 USB No Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI, UART Operating system BareMetal (No OS), TI RTOS Hardware accelerators 0 Nonvolatile memory (kByte) 8 Number of GPIOs 15 Number of I2Cs 1
CPU MSP430 Frequency (MHz) 16 Flash memory (kByte) 8 RAM (kByte) 2 ADC type 10-bit SAR Features Advanced sensing, CapTIvate Touch I/O, Real-time clock UART 1 Security Secure debug Number of ADC channels 8 SPI 2 USB No Operating temperature range (°C) -40 to 85 Rating Catalog Communication interface I2C, SPI, UART Operating system BareMetal (No OS), TI RTOS Hardware accelerators 0 Nonvolatile memory (kByte) 8 Number of GPIOs 15 Number of I2Cs 1
TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm) VQFN (RHL) 20 15.75 mm² (4.5 mm × 3.5 mm)
  • CapTIvate™ technology – capacitive touch
    • Performance
      • Fast electrode scanning with two simultaneous scans
      • Proximity sensing
    • Reliability
      • Increased immunity to power line, RF, and other environmental noise
      • Built-in spread spectrum, automatic tuning, noise filtering, and debouncing algorithms
      • Enables reliable touch solutions with 10-V RMS common-mode noise, 4-kV electrical fast transients, and 15-kV electrostatic discharge, allowing for IEC‑61000-4-6, IEC-61000-4-4, and IEC‑61000-4-2 compliance
      • Reduced RF emissions to simplify electrical designs
      • Support for metal touch and water rejection designs
    • Flexibility
    • Low power
      • <4 µA wake-on-touch with two sensors
      • Wake-on-touch state machine allows electrode scanning while CPU is asleep
      • Hardware acceleration for environmental compensation, filtering, and threshold detection
    • Ease of use
      • CapTIvate Design Center, PC GUI lets engineers design and tune capacitive buttons in real time without having to write code
      • CapTIvate software library in ROM provides ample FRAM for customer application
  • Embedded microcontroller
    • 16-bit RISC architecture
    • Clock supports frequencies up to 16 MHz
    • Wide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the SVS Specifications)
  • Optimized ultra-low-power modes
    • Active mode: 120 µA/MHz (typical)
    • Standby: <4 µA wake-on-touch with two sensors
    • Shutdown (LPM4.5): 36 nA without SVS
  • Low-power ferroelectric RAM (FRAM)
    • Up to 7.5 KB of nonvolatile memory
    • Built-in error correction code (ECC)
    • Configurable write protection
    • Unified memory of program, constants, and storage
    • 1015 write cycle endurance
    • Radiation resistant and nonmagnetic
    • High FRAM-to-SRAM ratio, up to 4:1
  • High-performance analog
    • Up to 8-channel 10-bit analog-to-digital converter (ADC)
      • Internal 1.5-V reference
      • Sample-and-hold 200 ksps
  • Intelligent digital peripherals
    • Two 16-bit timers with three capture/compare registers each (Timer_A3)
    • One 16-bit timer associated with CapTIvate™ technology
    • One 16-bit counter-only RTC
    • 16-bit cyclic redundancy check (CRC)
  • Enhanced serial communications with support for pin remap feature (see Device Comparison)
    • One eUSCI_A supports UART, IrDA, and SPI
    • One eUSCI_B supports SPI and I2C
  • Clock system (CS)
    • on-chip 32-kHz RC oscillator (REFO)
    • on-chip 16-MHz digitally controlled oscillator (DCO) with frequency-locked loop (FLL)
      • ±1% accuracy with on-chip reference at room temperature
    • On-chip very low-frequency 10-kHz oscillator (VLO)
    • On-chip high-frequency modulation oscillator (MODOSC)
    • External 32-kHz crystal oscillator (LFXT)
    • Programmable MCLK prescalar of 1 to 128
    • SMCLK derived from MCLK with programmable prescalar of 1, 2, 4, or 8
  • General input/output and pin functionality
    • Total of 15 I/Os on VQFN-20 package
    • 15 interrupt pins (P1 and P2) can wake MCU from low-power modes
  • Development tools and software
  • 12KB ROM library includes CapTIvate touch libraries and driver libraries
  • Family Members (Also See Device Characteristics)
    • MSP430FR2522: 7.25KB of program FRAM, 256B of information FRAM, 2KB of RAM
      up to 8 self-capacitive and 16 mutual-capacitive sensors
    • MSP430FR2512: 7.25KB of program FRAM, 256B of information FRAM, 2KB of RAM
      up to 4 self-capacitive or mutual-capacitive sensors
  • Package options
    • 20-pin: VQFN (RHL)
    • 16-pin: TSSOP (PW)
  • CapTIvate™ technology – capacitive touch
    • Performance
      • Fast electrode scanning with two simultaneous scans
      • Proximity sensing
    • Reliability
      • Increased immunity to power line, RF, and other environmental noise
      • Built-in spread spectrum, automatic tuning, noise filtering, and debouncing algorithms
      • Enables reliable touch solutions with 10-V RMS common-mode noise, 4-kV electrical fast transients, and 15-kV electrostatic discharge, allowing for IEC‑61000-4-6, IEC-61000-4-4, and IEC‑61000-4-2 compliance
      • Reduced RF emissions to simplify electrical designs
      • Support for metal touch and water rejection designs
    • Flexibility
    • Low power
      • <4 µA wake-on-touch with two sensors
      • Wake-on-touch state machine allows electrode scanning while CPU is asleep
      • Hardware acceleration for environmental compensation, filtering, and threshold detection
    • Ease of use
      • CapTIvate Design Center, PC GUI lets engineers design and tune capacitive buttons in real time without having to write code
      • CapTIvate software library in ROM provides ample FRAM for customer application
  • Embedded microcontroller
    • 16-bit RISC architecture
    • Clock supports frequencies up to 16 MHz
    • Wide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the SVS Specifications)
  • Optimized ultra-low-power modes
    • Active mode: 120 µA/MHz (typical)
    • Standby: <4 µA wake-on-touch with two sensors
    • Shutdown (LPM4.5): 36 nA without SVS
  • Low-power ferroelectric RAM (FRAM)
    • Up to 7.5 KB of nonvolatile memory
    • Built-in error correction code (ECC)
    • Configurable write protection
    • Unified memory of program, constants, and storage
    • 1015 write cycle endurance
    • Radiation resistant and nonmagnetic
    • High FRAM-to-SRAM ratio, up to 4:1
  • High-performance analog
    • Up to 8-channel 10-bit analog-to-digital converter (ADC)
      • Internal 1.5-V reference
      • Sample-and-hold 200 ksps
  • Intelligent digital peripherals
    • Two 16-bit timers with three capture/compare registers each (Timer_A3)
    • One 16-bit timer associated with CapTIvate™ technology
    • One 16-bit counter-only RTC
    • 16-bit cyclic redundancy check (CRC)
  • Enhanced serial communications with support for pin remap feature (see Device Comparison)
    • One eUSCI_A supports UART, IrDA, and SPI
    • One eUSCI_B supports SPI and I2C
  • Clock system (CS)
    • on-chip 32-kHz RC oscillator (REFO)
    • on-chip 16-MHz digitally controlled oscillator (DCO) with frequency-locked loop (FLL)
      • ±1% accuracy with on-chip reference at room temperature
    • On-chip very low-frequency 10-kHz oscillator (VLO)
    • On-chip high-frequency modulation oscillator (MODOSC)
    • External 32-kHz crystal oscillator (LFXT)
    • Programmable MCLK prescalar of 1 to 128
    • SMCLK derived from MCLK with programmable prescalar of 1, 2, 4, or 8
  • General input/output and pin functionality
    • Total of 15 I/Os on VQFN-20 package
    • 15 interrupt pins (P1 and P2) can wake MCU from low-power modes
  • Development tools and software
  • 12KB ROM library includes CapTIvate touch libraries and driver libraries
  • Family Members (Also See Device Characteristics)
    • MSP430FR2522: 7.25KB of program FRAM, 256B of information FRAM, 2KB of RAM
      up to 8 self-capacitive and 16 mutual-capacitive sensors
    • MSP430FR2512: 7.25KB of program FRAM, 256B of information FRAM, 2KB of RAM
      up to 4 self-capacitive or mutual-capacitive sensors
  • Package options
    • 20-pin: VQFN (RHL)
    • 16-pin: TSSOP (PW)

The MSP430FR25x2 is a family of ultra-low-power MSP430™ microcontrollers (MCUs) for capacitive touch sensing that feature CapTIvate™ touch technology for cost-sensitive applications featuring 1 to 16 capacitive buttons or proximity sensing. The MSP430FR25x2 MCUs offer value and performance for industrial applications exposed to electromagnetic disturbances, oil, water, and grease. The devices offer IEC-certified solutions with 5x lower power consumption than competition and support proximity sensing as well as touch through glass, plastic, and metal overlays.

TI capacitive touch sensing MSP430 MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. The BOOSTXL-CAPKEYPAD BoosterPack™ plug-in module can be used with the CAPTIVATE-PGMR programmer board (standalone or as part of the MSP-CAPT-FR2633 CapTIvate development kit) or with the LaunchPad development kit ecosystem. TI also provides free software including the CapTIvate Design Center, where engineers can quickly develop applications with an easy-to-use GUI and MSP430Ware™ software, and comprehensive documentation with the CapTIvate technology guide.

MSP430 MCUs with CapTIvate technology provide the most integrated and autonomous capacitive-touch solutions in the market with high reliability and noise immunity at the lowest power. For more information visit ti.com/captivate.

For complete module descriptions, see the MSP430FR4xx and MSP430FR2xx Family User’s Guide.

 
 

The MSP430FR25x2 is a family of ultra-low-power MSP430™ microcontrollers (MCUs) for capacitive touch sensing that feature CapTIvate™ touch technology for cost-sensitive applications featuring 1 to 16 capacitive buttons or proximity sensing. The MSP430FR25x2 MCUs offer value and performance for industrial applications exposed to electromagnetic disturbances, oil, water, and grease. The devices offer IEC-certified solutions with 5x lower power consumption than competition and support proximity sensing as well as touch through glass, plastic, and metal overlays.

TI capacitive touch sensing MSP430 MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. The BOOSTXL-CAPKEYPAD BoosterPack™ plug-in module can be used with the CAPTIVATE-PGMR programmer board (standalone or as part of the MSP-CAPT-FR2633 CapTIvate development kit) or with the LaunchPad development kit ecosystem. TI also provides free software including the CapTIvate Design Center, where engineers can quickly develop applications with an easy-to-use GUI and MSP430Ware™ software, and comprehensive documentation with the CapTIvate technology guide.

MSP430 MCUs with CapTIvate technology provide the most integrated and autonomous capacitive-touch solutions in the market with high reliability and noise immunity at the lowest power. For more information visit ti.com/captivate.

For complete module descriptions, see the MSP430FR4xx and MSP430FR2xx Family User’s Guide.

 
 
filter 尋找其它 感測 MCU
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 23
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 MSP430FR25x2 Capacitive Touch Sensing Mixed-Signal Microcontrollers datasheet (Rev. C) PDF | HTML 2019/12/10
* 使用指南 MSP430FR4xx and MSP430FR2xx Family User's Guide (Rev. I) 2019/3/13
* 勘誤表 MSP430FR2522 Device Erratasheet (Rev. H) PDF | HTML 2021/5/27
應用說明 Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2025/6/2
應用說明 Low-Power Battery Voltage Measurement With MSP430FR MCU On-Chip VREF and ADC (Rev. B) PDF | HTML 2021/8/2
應用說明 Migration from MSP430 FR58xx, FR59xx, and FR6xx to FR4xx and FR2xx (Rev. B) PDF | HTML 2021/8/2
應用說明 Designing With the MSP430FR4xx and MSP430FR2xx ADC (Rev. A) PDF | HTML 2021/8/2
應用說明 MSP430 System-Level ESD Considerations (Rev. B) PDF | HTML 2021/7/14
使用指南 CapTIvate™ Touch MCUs Getting Started Guide (Rev. A) PDF | HTML 2021/7/12
使用指南 MSP430 MCUs Development Guide Book (Rev. A) PDF | HTML 2021/5/13
應用說明 MSP430FR2xx and MSP430FR4xx DCO+FLL Application Guide 2020/12/7
白皮書 Capacitive Sensing Technology, Products, and Applications 2020/5/19
技術文章 The capacitive touch trend is rising rapidly. Can you keep up? PDF | HTML 2020/5/15
應用說明 Automating Capacitive Touch Sensor PCB Design Using OpenSCAD Scripts (Rev. B) PDF | HTML 2020/2/26
應用說明 MSP430 System ESD Troubleshooting Guide PDF | HTML 2019/12/13
應用說明 Capacitive Touch Design Flow for MSP430™ MCUs With CapTIvate™ Technology (Rev. B) PDF | HTML 2019/8/14
應用說明 Sensitivity, SNR, and design margin in capacitive touch applications (Rev. A) PDF | HTML 2019/3/25
技術文章 Adding imagination to your next-generation appliances PDF | HTML 2018/11/12
技術文章 Embedding more sensing and measurement at embedded world PDF | HTML 2018/2/28
技術文章 Thinking that capacitive touch is too expensive or complicated to include in your PDF | HTML 2018/2/27
白皮書 Simplify smart speaker human machine interface with capacitive-touch technology 2018/2/15
應用說明 Capacitive Touch Through Metal Using MSP430™ MCUs With CapTIvate™ Technology (Rev. A) 2017/10/31
技術文章 Why knock on wood when touch will do? PDF | HTML 2017/5/25

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
支援產品和硬體
開發套件

BOOSTXL-CAPKEYPAD — MSP430 CapTIvate™ MCU 觸控鍵盤 BoosterPack 插入式模組

BOOSTXL-CAPKEYPAD 是一套使用簡單的評估模組 (EVM)，適用於採用 CapTIvate™ 技術的 MSP430FR2522 電容式觸控感應微控制器 (MCU)。BOOSTXL-CAPKEYPAD 可以三種不同方法使用 — 與 LaunchPad™ 開發套件、CapTIvate 開發套件 (MSP-CAPT-FR2633) 或 CapTIvate 程式設計器板 (CAPTIVATE-PGMR) 搭配使用。

BOOSTXL-CAPKEYPAD 讓您透過新增具有 LED 背光和近距喚醒功能的 12 鍵電容式觸控數位鍵盤來擴展您的 LaunchPad™ 開發套件設計。沒有 (...)

使用指南: PDF
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

MSP-TS430RHL20 — 適用於 20 針腳 MSP430FR2422 與 MSP430FR25x2 MCU 的目標開發基板 (不包括微處理器)

附註：  此套件不包含 MSP430™ 微控制器 (MCU) 樣品。  若要索取相容裝置的樣品，請造訪產品頁面，或在將工具新增至 TI Store 購物車後選擇相關 MCU：MSP430FR2522、MSP430FR2512 或 MSP430FR2422。

MSP-TS430RHL20 微控制器開發板是一個獨立的 ZIF 插座目標板，用於透過 JTAG 介面或 Spy Bi-Wire (2 線 JTAG) 協定對 MSP430 在系統進行程式設計和偵錯。  此開發電路板支援採用 20 針腳 QFN 封裝的所有 MSP430FR25x2 和 MSP430FR2422 FRAM 裝置（TI (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
硬體程式設計工具

CAPTIVATE-PGMR — MSP430 CapTIvate MCU 編程器

MSP430 CapTIvate MCU 編程器可獨立使用，或做為 MSP CapTIvate™ MCU 開發套件的一部分提供。這是一個全面，易用的平台，可評估採用電容式觸控技術的 MSP430FR2633 微控制器。  編程器/偵錯器電路板可搭配 BOOSTXL-CAPKEYPAD BoosterPack™ 模組和透過金屬附加電路板的 CAPTIVATE-METAL 電容式觸控使用。  編程器採用 EnergyTrace™ 技術，可透過 Code Composer Studio™ IDE 測量能耗。  搭載 CapTIvate 技術的 MSP MCU 是業界最低功耗的電容式觸控 (...)
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
硬體程式設計工具

MSP-FET — MSP MCU 程式設計工具和偵錯器

MSP-FET 是一款強大的模擬開發工具，通常稱為偵錯探測器，可讓使用者快速展開 MSP 低功耗微控制器 (MCU) 的開始工作。

它支援透過 JTAG 和 SBW 介面進行編程和即時偵錯。此外，MSP-FET 也能在電腦 USB 介面與 MSP UART 間提供後通道 UART 連接。這為 MSP 程式設計工具提供了一種便利的方法，能在 MSP 和電腦上執行的終端之間進行串行通訊。它也支援透過 UART 和 I2C 通訊協定，使用 BSL（自舉式載入程式）將程式（通常稱為韌體）載入到 MSP 目標。

USB 介面可將 MSP-FET 連接至電腦，而 14 針腳連接器則可存取 MSP (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

ENERGYTRACE — EnergyTrace 技術

EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.

As most developers know, it is difficult (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

IAR-KICKSTART — IAR Embedded Workbench

IAR Embedded Workbench delivers a complete development toolchain for building and debugging embedded applications for your selected target microcontroller. The included IAR C/C++ Compiler generates highly optimized code for your application, and the C-SPY Debugger is a fully integrated debugger for (...)

從：IAR Systems
支援產品和硬體
線上培訓

MSP430-ACADEMY — MSP430™ academy

MSP430™ Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSP430 MCU portfolio.
支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
作業系統 (OS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 預先認證的安全 RTOS

SAFERTOS® 是專為嵌入式處理器設計的獨特即時作業系統。經 TÜV SÜD 預先認證，符合 IEC 61508 SIL3 與 ISO 26262 ASILD 標準。SAFERTOS® 是由 WHIS 專家團隊專為安全而打造，適用於全球重要安全應用。WHIS 與德州儀器的合作已經超過十年。在此期間，WHIS 已將 SAFERTOS® 移植至各種 TI 處理器，支援所有熱門核心，並可依要求提供其他架構。SAFERTOS® 專為您的特定處理器/編譯器組合量身打造，隨附完整的原始程式碼與設計保證包，可完全一目了然整個設計生命週期。許多 WHIS 客戶開始使用 FreeRTOS (...)

從：WITTENSTEIN High Integrity Systems
支援產品和硬體
應用軟體及架構

MSP430-IEC60730-SW-PACKAGE — IEC60730 Software Package

The IEC60730 MSP430 software package was developed to be useful in assisting customers in complying with IEC 60730-1:2010 (Automatic Electrical Controls for Household and Similar Use – Part 1: General Requirements) for up to Class B products, which includes home appliances, arc detectors, (...)

支援產品和硬體
應用軟體及架構

MSPCAPTDSNCTR — MSP CapTIvate™ design Center GUI

CapTIvate™ Design Center GUI 是一站式資源，提供整合在 TI MSP430™ 微控制器中之 CapTIvate 電容式感測技術所有相關資訊。其包括可簡化並加速電容式觸控設計的工具、文件和軟體範例。首先將電容感測元件 (即按鈕、滑桿、滾輪和近距感測器) 拖放至 GUI 工作區，並使用 GUI 以即時進行配置與調整設計。完成調整後，GUI 就會針對所選的電容式觸控元件，產生所需的原始程式碼。

支援產品和硬體
程式碼範例或展示

SLAC750 — MSP430FR2522 Code Examples

支援產品和硬體
驅動程式或資料庫

MSP-FRAM-UTILITIES — FRAM embedded software utilities for MSP ultra-low-power microcontrollers

The Texas Instruments FRAM Utilities is designed to grow as a collection of embedded software utilities that leverage the ultra-low-power and virtually unlimited write endurance of FRAM. The utilities are available for MSP430FRxx FRAM microcontrollers and provide example code to help start (...)

支援產品和硬體
韌體

MSPFRBOOT — MSPFRBOOT

MSP430™ 微控制器 (MCU) 上的開機載入程式 (BSL) 允許使用者在原型設計階段、最終生產和實際運作中，與 MSP MCU 內的嵌入式記憶體進行通訊。這可透過 UART、I2C、SPI 和 USB 等標準介面進行。可編程記憶體 (快閃記憶體/FRAM) 和資料記憶體 (RAM) 皆可視需要修改。

以下是在 MSP 產品組合中了解和有效使用 MSPBSL 所需的步驟。如需了解您裝置上的 BSL 支援哪些功能，或是與 BSL 通訊所需介面方法的最新資訊，請參閱「表 1.BSL 功能概覽」，其包含在步驟 1 中連結的 BSL 使用者指南中。

 

STEP 1：了解 MSP 開機載入程式 (...)

支援產品和硬體
軟體程式設計工具

MSP-GANG-SOFTWARE — MSP-GANG Software

The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
設計工具

MSP-3P-SEARCH — MSP 第三方搜尋工具

TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

(...)

支援產品和硬體
參考設計

TIDA-01559 — 具有近接感測與 LED 動畫的電容式觸控使用者介面參考設計

TIDA-01559 為一款使用 MSP430FR2522 MCU 和 LP5569 裝置的人機介面 (HMI) 參考設計，可實現超低待機功耗，並可透過 LED 引擎控制卸載 MCU 資源。此解決方案可用於任何需要使用具有良好 EMI 性能和防潮功能的低功耗 HMI 之處，  例如廚房排氣罩、爐台和冰箱。
支援產品和硬體
參考設計

TIDM-02004 — 手勢型電容觸控喇叭介面參考設計

手勢型電容式觸控喇叭介面參考設計展示了用於控制喇叭系統的超低功耗面板。此設計使用 MSP430™ 微控制器及 CapTIvate™ 技術，以辨識電容式觸控事件。此設計利用感測器的自電容配置來偵測近距，輕觸，拖曳和滑動手勢，可強化喇叭系統介面，並改善使用者體驗。MSP430FR2633 MCU 驅動所有電容式感測功能。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 16 Ultra Librarian
VQFN (RHL) 20 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片