MSPM0C1103
- Core
- Arm 32-bit Cortex-M0+ CPU, frequency up to 24MHz
- Operating characteristics
- Extended temperature: –40°C to 125°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 16KB of flash
- 1KB of SRAM
- High-performance analog peripherals
- One analog-to-digital converter (ADC) with up to 10 total external channels, 1.7Msps at 10 bit or 1.5Msps at 12 bit with VDD as the voltage reference
- Configurable 1.4V or 2.5V internal ADC voltage reference (VREF)
- Integrated temperature sensor
- Integrated supply monitor
- Optimized low-power modes
- RUN: 87µA/MHz
- STOP: 609µA at 4MHz, 311µA at 32kHz
- STANDBY: 5µA with SRAM retention
- SHUTDOWN: 200nA
- Intelligent digital peripherals
- 1-channel DMA controller dedicated for ADC
- Three timers supporting up to 14 PWM channels
- One 16-bit advanced timers with deadband support up to 8 PWM channels
- One 16-bit general purpose timer with 4 capture/compares
- One 16-bit general purpose timer with 2 capture/compares
- Windowed watchdog timer
- BEEPER generating 1kHz, 2kHz, 4kHz, or 8kHz square wave to drive the external beeper
- Enhanced communication interfaces
- One UART interface supporting LIN, IrDA, DALI, smart card, Manchester and low-power operation in STANDBY mode
- One I2C interface supporting FM+ (1Mbps), SMBus, PMBus, and wakeup from STOP mode
- One SPI supporting up to 12Mbps
- Clock system
- Internal 24MHz oscillator with an accuracy from -2% to +1.2% (SYSOSC)
- Internal 32kHz low-frequency oscillator (LFOSC)
- Data integrity
- Cyclic redundancy checker (CRC-16)
- Flexible I/O features
- Up to 18 GPIOs
- Two 5V-tolerant open-drain IOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 20-pin TSSOP (PW)
- 20-pin VSSOP (DGS)
- 20-pin WQFN (RUK)
- 16-pin SOT (DYY)
- 8-pin SOT (DDF)
- 8-pin WSON (DSG)
- 8-pin DSBGA (YCJ)
- Family members (also see Device Comparison)
- MSPS003F4: 16KB of flash, 1KB of RAM
- MSPS003F3: 8KB of flash, 1KB of RAM
- MSPM0C1104: 16KB of flash, 1KB of RAM
- MSPM0C1103: 8KB of flash, 1KB of RAM
- Development kits and software (also see Tools and Software)
- LP-MSPM0C1104 LaunchPad™ development kit
- MSP Software Development Kit (SDK)
MSPM0C110x microcontrollers (MCUs) are part of the MSP highly-integrated ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ core platform operating at up to 24MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 1.62V to 3.6V.
The MSPM0C110x devices provide up to 16KB embedded flash program memory with 1KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy from -2% to +1.2%, eliminating the need for an external crystal. Additional features include a 1-channel DMA, CRC-16 accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.5Msps ADC with VDD as the voltage reference, and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced timer, two 16-bit general purpose timer, one windowed watchdog timer, and a variety of communication peripherals including one UART, one SPI, and one I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration let customers find the MCU that meets their project needs. The architecture combined with extensive low-power modes is optimized to achieve extended battery life in portable measurement applications.
MSPM0C110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 C-Series 24MHz Microcontrollers Technical Reference Manual.
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
LP-MSPM0C1104 — 適用於 24-MHz Arm® Cortex®-M0+ MCU 的 MSPM0C1104 LaunchPad™ 開發套件
LP-MSPM0C1104 LaunchPad™ 開發套件是基於 MSPM0C1104 的易用型評估模組 (EVM)。其包含開始在 MSPM0C1104 M0+ MCU 平台上開發所需的一切，包括用於在更小的外形尺寸中進行編程和偵錯的板載偵錯探測器。電路板包含兩個按鈕和一個 LED。
ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器
μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。
在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。
其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。
TMDSEMU200-U — XDS200 USB 偵錯探測器
XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。
XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)
LB-3P-TRACE32-ARM — 適用於 Arm® 架構微控制器和處理器的 Lauterbach TRACE32® 偵錯和追蹤系統
Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證各種 Arm® 架構微控制器和處理器。全球知名的嵌入式系統和 SoC 偵錯和追蹤解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。藉由 TRACE32® 偵錯器，開發人員也可透過單一偵錯介面，同時偵錯和控制 SoC 中的任何 C28x/C29x/C6x/C7x DSP 核心及所有其他 Arm (...)
TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger
TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)
ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具
WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。
STM8S-TO-MSPS-MIGRATION-TOOL — Simplify migrating your application code from STM8S003 to MSPS003
The STM8S003 to MSPS003 migration tool provides a collection of software, tools, and documentation to simplify the process of migrating applications from the STM8S003 device family to the pin compatible MSPS003 (MSPM0C110x) devices.
支援產品和硬體
LP-MSPM0C1104-OOBE — Out-of-box experience GUI for LP-MSPM0C1104
支援產品和硬體
CCSTUDIO-STARTHUB — Example application browser
支援產品和硬體
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
支援產品和硬體
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ IDE is part of TI's extensive CCStudio™ development tool ecosystem. It is an integrated development environment (IDE) for TI's microcontrollers, processors, wireless connectivity devices and radar sensors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize (...)
支援產品和硬體
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio is a visual design environment that simplifies firmware development, making it possible to configure, develop, and run microcontroller applications in minutes with zero coding and no IDE required. Available as a standalone download or on the cloud.
支援產品和硬體
SYSCONFIG — Standalone desktop version of SysConfig
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
支援產品和硬體
GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.
UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)
支援產品和硬體
TIDA-010268 — 具有低壓側 MOSFET 控制的 5s 至 7s 電池組監控器參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YCJ) | 8 | Ultra Librarian |
| SOT-23-THN (DDF) | 8 | Ultra Librarian |
| SOT-23-THN (DYY) | 16 | Ultra Librarian |
| TSSOP (PW) | 20 | Ultra Librarian |
| VSSOP (DGS) | 20 | Ultra Librarian |
| WQFN (RUK) | 20 | Ultra Librarian |
| WSON (DSG) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。