首頁 微控制器 (MCU) 與處理器 Microcontrollers Low-power MCUs
首頁
微控制器 (MCU) 與處理器
Microcontrollers
Low-power MCUs

MSPM0L1346

現行

具 64-KB 快閃記憶體、4-KB SRAM、12 位元 ADC、比較器、TIA 的 32-MHz Arm® Cortex®-M0+ MCU

立即訂購
產品規格表
使用指南
勘誤表

MSPM0L1346

現行
產品規格表 立即訂購

產品詳細資料

CPU Arm Cortex-M0+ Frequency (MHz) 32 Flash memory (kByte) 64 RAM (kByte) 4 ADC type 12-bit SAR Features 5-V-tolerant I/Os, Comparator, DMA, LIN, Zero-drift OpAmp supporting TIA UART 2 Number of ADC channels 9 SPI 1 Operating temperature range (°C) -40 to 105 Rating Catalog Operating system Not Applicable Nonvolatile memory (kByte) 64 Number of GPIOs 22 Number of I2Cs 2 Security Secure debug
CPU Arm Cortex-M0+ Frequency (MHz) 32 Flash memory (kByte) 64 RAM (kByte) 4 ADC type 12-bit SAR Features 5-V-tolerant I/Os, Comparator, DMA, LIN, Zero-drift OpAmp supporting TIA UART 2 Number of ADC channels 9 SPI 1 Operating temperature range (°C) -40 to 105 Rating Catalog Operating system Not Applicable Nonvolatile memory (kByte) 64 Number of GPIOs 22 Number of I2Cs 2 Security Secure debug
VSSOP (DGS) 28 34.79 mm² 7.1 x 4.9
  • Core
    • Arm 32-bit Cortex-M0+ CPU, frequency up to 32 MHz
  • Operating characteristics
    • Extended temperature: –40°C to 125°C
    • Wide supply voltage range: 1.62 V to 3.6 V
  • Memories
    • Up to 64KB of flash
    • Up to 4KB of SRAM
  • High-performance analog peripherals
    • One 12-bit 1.68-Msps analog-to-digital converter (ADC) with up to 10 total external channels
    • Configurable 1.4-V or 2.5-V internal ADC voltage reference (VREF)
    • Two zero-drift, zero-crossover chopper operational amplifiers (OPA)
      • 0.5-µV/°C drift with chopping
      • 6-pA input bias current (1)
      • Integrated programmable gain stage (1-32x)
    • One general-purpose amplifier (GPAMP)
    • One high-speed comparator (COMP) with 8-bit reference DAC
      • 32-ns propagation delay
      • Low power mode down to <1-µA
    • Programmable analog connections between ADC, OPAs, COMP, and DAC
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 71 µA/MHz (CoreMark)
    • STOP: 151 µA at 4 MHz and 44 µA at 32 kHz
    • STANDBY: 1.0 µA with 32-kHz 16-bit timer running, SRAM/registers fully retained, and 32MHz clock wakeup in 3.2µs
    • SHUTDOWN: 61 nA with IO wakeup capability
  • Intelligent digital peripherals
    • 3-channel DMA controller
    • 3-channel event fabric signaling system
    • Four 16-bit general-purpose timers, each with two capture/compare registers supporting low-power operation in STANDBY mode, supporting a total of 8 PWM channels
    • Windowed watchdog timer
  • Enhanced communication interfaces
    • Two UART interfaces; one supporting LIN, IrDA, DALI, Smart Card, Manchester and both supporting low-power operation in STANDBY
    • Two I2C interfaces; one supporting FM+ (1 Mbit/s) and both supporting SMBus, PMBus, and wakeup from STOP
    • One SPI supporting up to 16 Mbit/s
  • Clock system
    • Internal 4- to 32-MHz oscillator with ±1.2% accuracy (SYSOSC)
    • Internal 32-kHz low-frequency oscillator with ±3% accuracy (LFOSC)
  • Data integrity
    • Cyclic redundancy checker (CRC-16 or CRC-32)
  • Flexible I/O features
    • Up to 28 GPIOs
    • Two 5-V-tolerant open-drain IOs with fail-safe protection
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 32-pin VQFN (RHB)
    • 32-pin VSSOP (DGS)
    • 28-pin VSSOP (DGS)
    • 24-pin VQFN (RGE)
    • 20-pin VSSOP (DGS)
    • 16-pin SOT(DYY)
    • 16-pin WQFN (RTR)
  • Family members (also see Device Comparison)
    • MSPM0L13x3: 8KB of flash, 2KB of RAM
    • MSPM0L13x4: 16KB of flash, 2KB of RAM
    • MSPM0L13x5: 32KB of flash, 4KB of RAM
    • MSPM0L13x6: 64KB of flash, 4KB of RAM
  • Development kits and software (also see Tools and Software)
    • LP-MSPM0L1306 LaunchPad™ development kit
    • MSP Software Development Kit (SDK)

(1)MSPM0L134x only
  • Core
    • Arm 32-bit Cortex-M0+ CPU, frequency up to 32 MHz
  • Operating characteristics
    • Extended temperature: –40°C to 125°C
    • Wide supply voltage range: 1.62 V to 3.6 V
  • Memories
    • Up to 64KB of flash
    • Up to 4KB of SRAM
  • High-performance analog peripherals
    • One 12-bit 1.68-Msps analog-to-digital converter (ADC) with up to 10 total external channels
    • Configurable 1.4-V or 2.5-V internal ADC voltage reference (VREF)
    • Two zero-drift, zero-crossover chopper operational amplifiers (OPA)
      • 0.5-µV/°C drift with chopping
      • 6-pA input bias current (1)
      • Integrated programmable gain stage (1-32x)
    • One general-purpose amplifier (GPAMP)
    • One high-speed comparator (COMP) with 8-bit reference DAC
      • 32-ns propagation delay
      • Low power mode down to <1-µA
    • Programmable analog connections between ADC, OPAs, COMP, and DAC
    • Integrated temperature sensor
  • Optimized low-power modes
    • RUN: 71 µA/MHz (CoreMark)
    • STOP: 151 µA at 4 MHz and 44 µA at 32 kHz
    • STANDBY: 1.0 µA with 32-kHz 16-bit timer running, SRAM/registers fully retained, and 32MHz clock wakeup in 3.2µs
    • SHUTDOWN: 61 nA with IO wakeup capability
  • Intelligent digital peripherals
    • 3-channel DMA controller
    • 3-channel event fabric signaling system
    • Four 16-bit general-purpose timers, each with two capture/compare registers supporting low-power operation in STANDBY mode, supporting a total of 8 PWM channels
    • Windowed watchdog timer
  • Enhanced communication interfaces
    • Two UART interfaces; one supporting LIN, IrDA, DALI, Smart Card, Manchester and both supporting low-power operation in STANDBY
    • Two I2C interfaces; one supporting FM+ (1 Mbit/s) and both supporting SMBus, PMBus, and wakeup from STOP
    • One SPI supporting up to 16 Mbit/s
  • Clock system
    • Internal 4- to 32-MHz oscillator with ±1.2% accuracy (SYSOSC)
    • Internal 32-kHz low-frequency oscillator with ±3% accuracy (LFOSC)
  • Data integrity
    • Cyclic redundancy checker (CRC-16 or CRC-32)
  • Flexible I/O features
    • Up to 28 GPIOs
    • Two 5-V-tolerant open-drain IOs with fail-safe protection
  • Development support
    • 2-pin serial wire debug (SWD)
  • Package options
    • 32-pin VQFN (RHB)
    • 32-pin VSSOP (DGS)
    • 28-pin VSSOP (DGS)
    • 24-pin VQFN (RGE)
    • 20-pin VSSOP (DGS)
    • 16-pin SOT(DYY)
    • 16-pin WQFN (RTR)
  • Family members (also see Device Comparison)
    • MSPM0L13x3: 8KB of flash, 2KB of RAM
    • MSPM0L13x4: 16KB of flash, 2KB of RAM
    • MSPM0L13x5: 32KB of flash, 4KB of RAM
    • MSPM0L13x6: 64KB of flash, 4KB of RAM
  • Development kits and software (also see Tools and Software)
    • LP-MSPM0L1306 LaunchPad™ development kit
    • MSP Software Development Kit (SDK)

(1)MSPM0L134x only

MSPM0L134x and MSPM0L130x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MSPM0 MCU family based on the enhanced Arm Cortex-M0+ core platform operating at up to 32-MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62 V to 3.6 V.

The MSPM0L134x and MSPM0L130x devices provide up to 64KB embedded flash program memory with up to 4KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy up to ±1.2%, eliminating the need for an external crystal. Additional features include a 3-channel DMA, 16- and 32-bit CRC accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.68-MSPS ADC with configurable internal voltage reference, one high-speed comparator with built-in reference DAC, two zero-drift zero-crossover operational amplifiers with programmable gain, one general-purpose amplifier, and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as four 16-bit general purpose timers, one windowed watchdog timer, and a variety of communication peripherals including two UARTs, one SPI, and two I2Cs. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, Smart Card, SMBus, and PMBus.

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers find the MCU that meets their project’s needs. The architecture combined with extensive low-power modes are optimized to achieve extended battery life in portable measurement applications.

MSPM0L134x and MSPM0L130x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ development kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 L-Series 32-MHz Microcontrollers Technical Reference Manual.

MSPM0L134x and MSPM0L130x microcontrollers (MCUs) are part of the MSP highly-integrated, ultra-low-power 32-bit MSPM0 MCU family based on the enhanced Arm Cortex-M0+ core platform operating at up to 32-MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62 V to 3.6 V.

The MSPM0L134x and MSPM0L130x devices provide up to 64KB embedded flash program memory with up to 4KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy up to ±1.2%, eliminating the need for an external crystal. Additional features include a 3-channel DMA, 16- and 32-bit CRC accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.68-MSPS ADC with configurable internal voltage reference, one high-speed comparator with built-in reference DAC, two zero-drift zero-crossover operational amplifiers with programmable gain, one general-purpose amplifier, and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as four 16-bit general purpose timers, one windowed watchdog timer, and a variety of communication peripherals including two UARTs, one SPI, and two I2Cs. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, Smart Card, SMBus, and PMBus.

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration allowing for customers find the MCU that meets their project’s needs. The architecture combined with extensive low-power modes are optimized to achieve extended battery life in portable measurement applications.

MSPM0L134x and MSPM0L130x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ development kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 L-Series 32-MHz Microcontrollers Technical Reference Manual.
filter 尋找其它 Low-power MCUs
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 47
重要文件 類型 標題 格式選項 日期
* Data sheet MSPM0L130x Mixed-Signal Microcontrollers datasheet (Rev. D) PDF | HTML 2024年 1月 5日
* Errata MSPM0L110x, MSPM0L13xx Microcontrollers Errata (Rev. D) PDF | HTML 2025年 8月 7日
* User guide MSPM0 L-Series 32-MHz Microcontrollers Technical Reference Manual (Rev. E) PDF | HTML 2025年 5月 23日
Application note Cybersecurity Enablers in MSPM0 MCUs (Rev. A) PDF | HTML 2025年 12月 10日
Application note EMC Improvement Guide for MSPM0 (Rev. A) PDF | HTML 2025年 12月 2日
Subsystem design ADC to I2C (Rev. A) PDF | HTML 2025年 9月 10日
Subsystem design ADC to UART (Rev. A) PDF | HTML 2025年 9月 9日
Subsystem design DMA Ping Pong With ADC (Rev. B) PDF | HTML 2025年 9月 9日
Subsystem design Thermistor Temperature Sensing (Rev. A) PDF | HTML 2025年 9月 9日
Application note MSPM0 Bootloader Implementation (Rev. D) PDF | HTML 2025年 9月 4日
Subsystem design ADC to SPI (Rev. A) PDF | HTML 2025年 8月 27日
User guide MSPM0 MCUs Development Guide (Rev. G) PDF | HTML 2025年 8月 27日
Subsystem design 5V Interface (Rev. A) PDF | HTML 2025年 8月 20日
Subsystem design Data Sensor Aggregator Subsystem Design (Rev. A) PDF | HTML 2025年 8月 20日
Subsystem design Emulate EEPROM with FLASH (Type A) (Rev. A) PDF | HTML 2025年 8月 13日
Subsystem design Common Amplifier Topologies: PGA (Rev. A) PDF | HTML 2025年 8月 12日
Subsystem design LED Driver With PWM (Rev. A) PDF | HTML 2025年 8月 12日
Subsystem design Transimpedance Amplifier (Rev. A) PDF | HTML 2025年 8月 12日
Subsystem design Emulate EEPROM With FLASH (Type B) (Rev. A) PDF | HTML 2025年 8月 6日
Subsystem design Frequency Counter: Tone Detection (Rev. A) PDF | HTML 2025年 8月 6日
Subsystem design MCU Design Techniques: ADC to PWM (Rev. A) PDF | HTML 2025年 8月 1日
Application note Migration Guide From MSP430 MCUs to MSPM0 MCUs (Rev. B) PDF | HTML 2025年 6月 2日
White paper MSPM0L134x Transimpedance Amplifier (TIA) Empowers Future Sensing Applications PDF | HTML 2025年 3月 13日
Application note LIN Basics and Implementation on MSPM0 PDF | HTML 2025年 2月 21日
Application note Laser Speckle Reduction Solution in Projector based on MSPM0 MCU PDF | HTML 2025年 2月 20日
User guide Migration Guide From NXP to MSPM0 PDF | HTML 2025年 2月 3日
Application note Closed Loop Constant Power Drive to Simplify Heater Element Control and Extend Battery Life PDF | HTML 2025年 1月 29日
Application note Realization of Password-Protected Debug Based on Software PDF | HTML 2024年 3月 6日
Design guide Smart Analog Sensor Interface for Smoke Detection With Ambient Light Cancellation Reference Design PDF | HTML 2023年 12月 12日
Application note Operating Time of MSPM0 Powered by a Capacitor PDF | HTML 2023年 10月 3日
Application brief Build Scalability in Cordless Power and Garden Tools Using Low-Cost MSPM0 MCUs (Rev. A) PDF | HTML 2023年 9月 27日
Application note PIR Motion Detection With MSPM0 PDF | HTML 2023年 9月 19日
Application brief Using MSPM0 MCUs to Design Trapezoidal-Based BLDC Motor Controllers (Rev. A) PDF | HTML 2023年 9月 14日
Application brief Optimized H-Bridge Driver Control for Stepper and BDC Motors Using MSPM0 MCUs (Rev. A) PDF | HTML 2023年 9月 6日
Application note Dual-Ray Smoke Detector with the TPS8802 and MSPM0 MCUs PDF | HTML 2023年 8月 22日
Application note EEPROM Emulation Type A Solution PDF | HTML 2023年 4月 18日
Application note EEPROM Emulation Type B Design PDF | HTML 2023年 4月 11日
Application brief Increasing Flexibility in Your Battery Management Designs With a Low-Cost MSPM0 PDF | HTML 2023年 3月 2日
Application brief Increasing Flexibility in Your Electrical Thermometer Designs With Low-Cost MSPM PDF | HTML 2023年 3月 2日
Application brief Optimizing Field Sensor and Transmitter Applications With MSPM0 MCUs PDF | HTML 2023年 3月 2日
Application brief Simplifying Design in True Wireless Stereo Control With a Low-Cost MSPM0 MCU PDF | HTML 2023年 3月 2日
Application brief Simplifying Pulse Oximeter Designs With Low-Cost Highly Integrated MSPM0 MCUs PDF | HTML 2023年 3月 2日
Application brief Streamlining Smoke Detector Designs With Highly Integrated MSPM0 MCUs PDF | HTML 2023年 3月 2日
Application note MSPM0 L-Series MCUs Power Optimization Guide PDF | HTML 2023年 2月 22日
White paper MSPM0: Idea to Product With Easy-to-Use Tools, Software, and Academy PDF | HTML 2023年 2月 22日
Application note Make System Design Easy With MSPM0 Precision Analog PDF | HTML 2023年 2月 22日
Application note MSPM0L or MSPM0G: How to Pick the Right MSP Microcontroller for Your Application PDF | HTML 2022年 12月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LP-MSPM0L1306 — 適用於 32-MHz Arm® Cortex®-M0+ MCU 的 MSPM0L1306 LaunchPad™ 開發套件

LP-MSPM0L1306 LaunchPad™ 開發套件是基於 MSPM0L1306 的易用型評估模組 (EVM)。其包含開始在 MSPM0L1306 M0+ MCU 平台上開發所需的一切，包括用於編程、偵錯和能源量測的板載偵錯探測器。電路板包含三個按鈕、兩個 LED (一個是 RGB LED)、一個類比溫度感測器和光感測器。

使用指南: PDF | HTML
TI.com 無法提供
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
造訪合作夥伴網站
偵錯探測器

TMDSEMU110-U — XDS110 JTAG 偵錯探測器

德州儀器 XDS110 是一種全新的偵錯探測器 (模擬器) 類別，適用於 TI 嵌入式處理器。XDS110 取代 XDS100 系列，可在單一 Pod 中支援更廣泛的標準 (IEEE1149.1、IEEE1149.7、SWD)。同時，所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。  對於針腳上的核心追蹤，則需要 XDS560v2 PRO TRACE。

德州儀器 XDS110 透過 TI 20 針腳連接器（具有用於 TI 14 針腳和 Arm 10 針腳和 Arm 20 針腳的多轉接器）連接到目標電路板，並透過 USB2.0 (...)

使用指南: PDF
TI.com 無法提供
偵錯探測器

TMDSEMU200-U — XDS200 USB 偵錯探測器

XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。

XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)

TI.com 無法提供
偵錯探測器

LB-3P-TRACE32-ARM — 適用於 Arm® 架構微控制器和處理器的 Lauterbach TRACE32® 偵錯和追蹤系統

Lauterbach 的 TRACE32® 工具是一套先進的軟硬體元件，可讓開發人員分析、最佳化及認證各種 Arm® 架構微控制器和處理器。全球知名的嵌入式系統和 SoC 偵錯和追蹤解決方案是完美的解決方案，適用於從早期的矽前 (pre-silicon) 開發，到產品認證和現場故障排除等所有開發階段。Lauterbach 工具的直覺模組化設計為工程師提供現今最高的可用性能，以及可隨需求變化而調整和成長的系統。藉由 TRACE32® 偵錯器，開發人員也可透過單一偵錯介面，同時偵錯和控制 SoC 中的任何 C28x/C29x/C6x/C7x DSP 核心及所有其他 Arm (...)

從：Lauterbach GmbH
View Options
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
造訪合作夥伴網站
Third-party accessory

VCTR-3P-VX1000 — VX1000 量測與校準介面硬體

VX1000 硬體能讓 CANape 等量測與校準工具以高效能且對執行階段影響極小的方式存取 ECU。此硬體專為車用設計，但亦可應用於測試平台與實驗室環境。憑藉其高度擴展性與廣泛的產品組合，VX1000 硬體能為各種應用場景提供合適的解決方案。
該系統由兩大主要元件組成：基礎模組與插接裝置。VX1000 系列支援多種控制器，包括 Sitara 系列（AM263、AM263P、AM275）、Jacinto 系列 (TDA4)、AWR1843、AWR2944、MSPM0x 及 TM4C129。JTAG、SWD、Aurora 與 Nexus-Aux 是 VX1000 可直接支援的主流控制器介面。

從：Vector Informatik GmbH
造訪合作夥伴網站
軟體開發套件 (SDK)

MSPM0-SDK — MSPM0 Software Development Kit (SDK)

The MSPM0 SDK provides the ultimate collection of software, tools and documentation to accelerate the development of applications for the MSPM0 MCU platform under a single software package.

支援產品和硬體

支援產品和硬體
瀏覽 下載選項
開發模組 (EVM) 的 GUI

LP-MSPM0L1306-OOBE — Out-of-box experience GUI for LP-MSPM0L1306

Out-of-box experience GUI for LP-MSPM0L1306
支援產品和硬體

支援產品和硬體
啟動
開發模組 (EVM) 的 GUI

MSPM0-ANALOG-CONFIGURATOR — Analog Configurator for MSPM0

The MSPM0 analog configurator is a graphical configuration tool designed to simplify and accelerate the design and enablement of an analog signal chain using a MSPM0 device with no traditional coding development necessary.

The tool uses an intuitive GUI to configure a signal chain using the high (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
快速入門

CCSTUDIO-STARTHUB — Example application browser

Explore a vast library of example projects, categorized by application type, with support for multiple development environments
支援產品和硬體

支援產品和硬體
啟動 下載選項
快速入門

MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications

MSP Motor Control is a collection of software, tools and examples to spin motors in 30 minutes or less with MSPM0 Arm® Cortex® M0+ MCUs and popular motor driver solutions.

MSP Motor Control provides examples for supported hardware kits to spin brushed, stepper, and three-phase motors with sensored (...)

支援產品和硬體

支援產品和硬體
開始使用 下載選項
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體

支援產品和硬體
開始使用
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.

(...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
IDE、配置、編譯器或偵錯程式

MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers

MSP Zero Code Studio is a visual design environment that simplifies firmware development, making it possible to configure, develop, and run microcontroller applications in minutes with zero coding and no IDE required. Available as a standalone download or on the cloud.

支援產品和硬體

支援產品和硬體
啟動 下載選項
IDE、配置、編譯器或偵錯程式

SYSCONFIG — Standalone desktop version of SysConfig

SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.

SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
線上培訓

MSPM0-ACADEMY — MSPM0 Academy

MSPM0 Academy delivers easy-to-use training modules that span a wide range of topics and LaunchPads in the MSPM0 MCU portfolio.
支援產品和硬體

支援產品和硬體
瀏覽
作業系統 (OS)

GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS

The µ-velOSity™ Safety RTOS is the smallest of Green Hills Software's real-time operating systems and was designed especially for microcontrollers. It supports a wide range of TI processor families using the Arm® Cortex-M or Cortex-R cores as a main CPU or as a co-processors (...)
從：Green Hills Software
造訪合作夥伴網站
軟體程式設計工具

MSP-GANG-SOFTWARE — MSP-GANG Software

The MSP Gang Programmer (MSP-GANG) is a MSPM0/MSP430/MSP432 device programmer that can program up to eight identical devices at the same time.
支援產品和硬體

支援產品和硬體
下載選項
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash is a software tool for programming on-chip flash on TI microcontrollers and wireless connectivity devices and on-board flash for TI processors. UniFlash provides both graphical and command-line interfaces.

UniFlash can be run from the cloud on the TI Developer Zone or downloaded and used (...)

支援產品和硬體

支援產品和硬體
啟動 下載選項
設計工具

MSP-3P-SEARCH — MSP 第三方搜尋工具

TI has partnered with multiple companies to offer a wide range of solutions and services for TI MSP devices. These companies can accelerate your path to production using MSP devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your needs.

(...)

下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGS) 28 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片