現在提供此產品的更新版本
功能相同,但引腳輸出與所比較的裝置不同
PCM1804-Q1
- Qualified for Automotive Applications
- AEC-Q100 Test Guidance With the Following Results:
- Device Temperature Grade 3: –40°C to 85°C
Ambient Operating Temperature Range - Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C3B
- Device Temperature Grade 3: –40°C to 85°C
- 24-Bit Delta-Sigma Stereo A/D Converter
- High Performance:
- Dynamic Range: 112 dB (Typical)
- SNR: 111 dB (Typical)
- THD+N: –102 dB (Typical)
- High-Performance Linear Phase Antialias Digital Filter:
- Pass-Band Ripple: ±0.005 dB
- Stop-Band Attenuation: –100 dB
- Fully Differential Analog Input: ±2.5 V
- Audio Interface: Master- or Slave-Mode Selectable
- Data Formats: Left-Justified, I2S, Standard 24-Bit, and DSD
- Function:
- Peak Detection
- High-Pass Filter (HPF): –3 dB at 1 Hz,
fS = 48 kHz
- Sampling Rate up to 192 kHz
- System Clock: 128 fS, 256 fS, 384 fS,
512 fS, or 768 fS - Dual Power Supplies:
- 5 V for Analog
- 3.3 V for Digital
- Power Dissipation: 225 mW
- Small 28-Pin SSOP
- DSD Output: 1 Bit, 64 fS
The PCM1804-Q1 device is a high-performance, single-chip stereo A/D converter with fully differential analog voltage input which uses a precision delta-sigma modulator and includes a linear-phase antialias digital filter and high-pass filter (HPF) that removes DC offset from the input signal. The PCM1804-Q1 device is suitable for a wide variety of mid- to high-grade consumer and professional applications, where excellent performance and 5-V analog supply and 3.3-V digital power-supply operation are required. The PCM1804-Q1 device can achieve both PCM audio and DSD format due to the precision delta-sigma modulator. The PCM1804-Q1 device is fabricated using an advanced CMOS process and is available in a small 28-pin SSOP package.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | FULL DIFFERENTIAL ANALOG INPUT 24 BIT, 192-kHz STEREO A/D CONVERTER datasheet (Rev. A) | 2012年 8月 9日 | |
Application note | Gain Scaling and Audio Performance of the PCM1804 | 2002年 5月 9日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SSOP (DB) | 28 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。