首頁 音訊、觸覺和壓電 音訊放大器 喇叭、電視與條型音箱音訊放大器
首頁
音訊、觸覺和壓電
音訊放大器
喇叭、電視與條型音箱音訊放大器

TAS5802

現行

20W stereo, 40W mono, digital-input high-efficiency Class-D audio amplifier

立即訂購
產品規格表

TAS5802

現行
產品規格表 立即訂購

產品詳細資料

Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface I2C Output power (W) 22 Power stage supply (max) (V) 20 Power stage supply (min) (V) 4.5 RDS(on) (Ω) 0.12 THD + N at 1 kHz (%) 0.06 Load (min) (Ω) 4 Analog supply voltage (min) (V) 4.5 Analog supply voltage (max) (V) 20 Rating Catalog Operating temperature range (°C) to
Audio input type Digital Input Architecture Class-D Speaker channels (max) Stereo Control interface I2C Output power (W) 22 Power stage supply (max) (V) 20 Power stage supply (min) (V) 4.5 RDS(on) (Ω) 0.12 THD + N at 1 kHz (%) 0.06 Load (min) (Ω) 4 Analog supply voltage (min) (V) 4.5 Analog supply voltage (max) (V) 20 Rating Catalog Operating temperature range (°C) to
HTSSOP (PWP) 28 62.08 mm² 9.7 x 6.4
  • Supports multiple output configurations
    • 2 × 22.7W, BTL mode(8Ω, 20V, THD+N=1%)
    • 2 × 28W, BTL mode(6Ω, 20V, THD+N=1%)
  • Excellent audio performance:
    • 65uVrms Idle noise (typical)
    • THD+N ≤ 0.06% at 1W, 1kHz, PVDD = 12V
    • SNR ≥ 108dB (A-weighted)
  • High-efficiency class-D and better thermal performance:
    • > 90% Power efficiency, 120mΩ RDS(on)
  • Flexible audio I/O:
    • I2S, LJ, RJ, TDM
    • Supports 32, 44.1, 48, 88.2, 96kHz sample rates
    • SDOUT for Audio monitoring, sub-channel, echo cancellation
    • Supports stereo bridge-tied (BTL)
  • Enhanced audio processing
    • Multi-band advanced DRC+AGL
    • 2×15 BQs with smart EQ
    • Dynamic EQ and smart bass
    • DC Blocking
  • Excellent power consumption profile:
    • Non-latching over-current error (OCE)
    • Enhanced over-temperature protection
      • Over-temperature warn (OTW)
      • Over-temperature error (OTE)
    • Under/over-voltage lock-out (UVLO/OVLO)
  • Easy system integration
    • Flexible control strategy
      • Software control (full features)
    • Reduced solution size
      • Fewer passives required compare with open loop devices
      • Inductor-less operation (ferrite bead) for most cases where PVDD ≤ 12V
  • Supports multiple output configurations
    • 2 × 22.7W, BTL mode(8Ω, 20V, THD+N=1%)
    • 2 × 28W, BTL mode(6Ω, 20V, THD+N=1%)
  • Excellent audio performance:
    • 65uVrms Idle noise (typical)
    • THD+N ≤ 0.06% at 1W, 1kHz, PVDD = 12V
    • SNR ≥ 108dB (A-weighted)
  • High-efficiency class-D and better thermal performance:
    • > 90% Power efficiency, 120mΩ RDS(on)
  • Flexible audio I/O:
    • I2S, LJ, RJ, TDM
    • Supports 32, 44.1, 48, 88.2, 96kHz sample rates
    • SDOUT for Audio monitoring, sub-channel, echo cancellation
    • Supports stereo bridge-tied (BTL)
  • Enhanced audio processing
    • Multi-band advanced DRC+AGL
    • 2×15 BQs with smart EQ
    • Dynamic EQ and smart bass
    • DC Blocking
  • Excellent power consumption profile:
    • Non-latching over-current error (OCE)
    • Enhanced over-temperature protection
      • Over-temperature warn (OTW)
      • Over-temperature error (OTE)
    • Under/over-voltage lock-out (UVLO/OVLO)
  • Easy system integration
    • Flexible control strategy
      • Software control (full features)
    • Reduced solution size
      • Fewer passives required compare with open loop devices
      • Inductor-less operation (ferrite bead) for most cases where PVDD ≤ 12V

The TAS5802 is a 2×22 W digital input Class-D audio amplifier for driving loudspeakers used in consumer, commercial, and industrial electronics. The device is highly flexible, allowing operation with a range of control methods, power supply configurations, and audio I/O arrangements.

The TAS5802 high-performance closed-loop architecture and wide-switching frequency range reduce the solution size by reducing passive components and eliminating the inductor + capacitor (LC) filters in most applications. Advanced electromagnetic interference (EMI) reduction techniques allow excellent electromagnetic compliance (EMC) performance, even when used with ferrite bead + capacitor (BC) filters. Several power consumption methods have been implemented to minimize idle power consumption (IPC).

The TAS5802 is a 2×22 W digital input Class-D audio amplifier for driving loudspeakers used in consumer, commercial, and industrial electronics. The device is highly flexible, allowing operation with a range of control methods, power supply configurations, and audio I/O arrangements.

The TAS5802 high-performance closed-loop architecture and wide-switching frequency range reduce the solution size by reducing passive components and eliminating the inductor + capacitor (LC) filters in most applications. Advanced electromagnetic interference (EMI) reduction techniques allow excellent electromagnetic compliance (EMC) performance, even when used with ferrite bead + capacitor (BC) filters. Several power consumption methods have been implemented to minimize idle power consumption (IPC).
filter 尋找其它 喇叭、電視與條型音箱音訊放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet TAS5802 22W Stereo, Inductor-Less, Digital Input, Closed-Loop Class-D Audio Amplifier with 96Khz Extended Processing and Low Idle Power Dissipation datasheet (Rev. A) PDF | HTML 2025年 8月 21日
User guide TAS5815 and TAS5802 Process Flows PDF | HTML 2025年 1月 14日
Certificate TAS5802PWPEVM EU RoHS Declaration of Conformity (DoC) 2024年 11月 12日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TAS5802EVM — TAS5802 evaluation module

The TAS5802PWPEVM helps designers evaluate the operation and performance of the TAS5802PWP digital-input closed-loop Class-D amplifier. The TAS5802PWP is a stereo high-performance closed-loop Class-D amplifier with low power dissipation and advanced audio processing. The PurePath™ Console 3 (...)
使用指南: PDF | HTML
TI.com 無法提供
支援軟體

TAS5802-SW — TAS5802 PurePath™ Console 3 files

TAS5802 PurePath™ Console 3 files
支援產品和硬體

支援產品和硬體

產品
Speaker, TV & soundbar audio amplifiers
  • TAS5802 — 20W stereo, 40W mono, digital-input high-efficiency Class-D audio amplifier
硬體開發
開發板
要求
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HTSSOP (PWP) 28 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片