IDE、配置、編譯器或偵錯程式
TAS5815-SW — TAS5815 Software GUI
TAS5815 Software GUI
支援產品和硬體
產品
Speaker, TV & soundbar audio amplifiers
- TAS5815 — 具有 H 類控制的 30W 立體聲、60W 單聲道數位輸入高效率 D 類音訊放大器
硬體開發
開發板
- TAS5815EVM — TAS5815 評估模組
TAS5815
- Support multiple output configurations
- 2 × 30W in 2.0 mode (6Ω, 21V, THD+N=1%)
- 58W in Mono mode (3Ω, 21V, THD+N=1%)
- Excellent audio performance:
- THD+N ≤ 0.03% at 1W, 1kHz, PVDD = 12V
- SNR ≥ 110dB (A-weighted), ICN ≤ 45µVRMS
- Efficient class-D operation:
- > 90% Power efficiency, 120mΩ RDS(on)
- Flexible power supply configurations
- PVDD: 4.5V to 26.4V
- DVDD and I/O: 1.8V or 3.3V
- Flexible audio I/O:
- Supports 32, 44.1, 48, 88.2, 96kHz sample rates
- I2S, LJ, RJ, TDM
- SDOUT for audio monitoring, sub-channel or echo cancellation
- Support 3-wire digital audio interface (no MCLK required)
- Supports stereo bridge-tied or mono parallel bridge-tied loads (BTL and PBTL)
- Supports 8 steps Class-H DC-DC control.
- Enhanced audio processing:
- Sample rate convertor
- 96kHz processor sampling
- DC blocking, 2 ×15 BQs, DPEQ, THD manager
- 4th Order 2-band DRC + AGL
- Over temperature fold back
- 8 Class-H DC-DC control steps with 2.5ms look ahead buffer for BTL mode and 5ms for PBTL mode at 48k sample rate.
- Excellent integrated self-protection:
- Over-current error (OCE)
- Over-temperature warning (OTW)
- Over-temperature error (OTE)
- Under or over-voltage lock-out (UVLO/OVLO)
- Easy system integration
- I2C Software Control
- Reduced solution size
- Less passives required compare to open loop devices
- Ultra low EMI with latest EMI technology
- No large inductors required for most applications
The TAS5815 is a high efficiency digital input Class-D audio amplifier with integrated audio processor with up to 96kHz architecture, adaptive modulation schemes based on output power and low RDS(on)= 120mΩ. It also supports DPEQ process for easy tuning.
The DPEQ is used to mix the audio signals through two signal paths (low level and high level). These 2 paths are used with separate equalization properties. A third path monitors the incoming audio and determines the thresholds and mixing characteristics between these two parts. Thus, the mix between the two high- and low-level channels is dynamic in nature and depends on the incoming audio.
The high-performance closed loop architecture and wide-switching frequency range reduces the solution size by reducing passive components and minimizing the inductor size in most applications. TAS5815 has an integrated audio processor with up to 96kHz architecture to support an advanced process flow. The device has an integrated a proprietary algorithm called Class-H. The Class-H algorithm detects the upcoming audio power demand and provides a PWM control signal for the former DC-DC converter via the feedback pin (FB). This feature used to increase the system-level efficiency and reduce total power consumption. The TAS5815 supports up to 2.5ms of delay buffer to look ahead at the audio signal and prevents audio clipping distortion.
This device also supports speaker load open/short detection and report detection result with register report.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TAS5815 30-W, Digital Input, Stereo, Closed-loop Class-D Audio Amplifier with 96 kHz Enhanced Processing datasheet (Rev. A) | PDF | HTML | 2026年 1月 30日 |
| User guide | TAS5815 and TAS5802 Process Flows | PDF | HTML | 2025年 1月 14日 | |
| Certificate | TAS5815PWPEVM EU Declaration of Conformity (DoC) | 2024年 5月 24日 | ||
| Certificate | TAS5815EVM EU Declaration of Conformity (DoC) | 2023年 10月 30日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TAS5815EVM — TAS5815 評估模組
TAS5815 評估模組 (EVM) 可協助設計人員評估 TAS5815PWP 數位輸入閉迴路 D 類放大器的操作和性能。TAS5815PWP 為一款立體聲高性能閉迴路 D 類放大器，具低功耗和進階音訊處理能力。名為 PurePath™ Control Console 3 的圖形使用者介面 (或稱 GUI) 用於透過 USB 連接到 EVM。該 EVM 具有光纖和 SPDIF 輸入、I2S、TDM 和透過 USB 介面的音訊輸入。
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTSSOP (PWP) | 28 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。