首頁 微控制器 (MCU) 與處理器 Microcontrollers 即時數位電源 MCU
首頁
微控制器 (MCU) 與處理器
Microcontrollers
即時數位電源 MCU

TMS320F28051

現行

具 60 MHz、64 KB 快閃記憶體、PGA 和 2 MSPS ADC 的 C2000™ 32 位元 MCU

立即訂購
產品規格表
使用指南

TMS320F28051

現行
產品規格表 立即訂購

產品詳細資料

CPU 1 C28 Frequency (MHz) 60 Flash memory (kByte) 64 RAM (kByte) 20 ADC type 12-bit Total processing (MIPS) 60 Features 32-bit CPU timers, PGA, Single zone code security, Watchdog timer UART 3 CAN (#) 1 Sigma-delta filter 0 PWM (Ch) 14 Security Secure storage TI functional safety category Functional Safety Quality-Managed Number of ADC channels 16 Direct memory access (Ch) 0 SPI 1 QEP 1 USB No Hardware accelerators CPU only Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, I2C, SPI, UART Operating system BareMetal (No OS), FreeRTOS, SafeRTOS Nonvolatile memory (kByte) 64 Number of GPIOs 42 Number of I2Cs 1
CPU 1 C28 Frequency (MHz) 60 Flash memory (kByte) 64 RAM (kByte) 20 ADC type 12-bit Total processing (MIPS) 60 Features 32-bit CPU timers, PGA, Single zone code security, Watchdog timer UART 3 CAN (#) 1 Sigma-delta filter 0 PWM (Ch) 14 Security Secure storage TI functional safety category Functional Safety Quality-Managed Number of ADC channels 16 Direct memory access (Ch) 0 SPI 1 QEP 1 USB No Hardware accelerators CPU only Edge AI enabled Yes Operating temperature range (°C) -40 to 125 Rating Catalog Communication interface CAN, I2C, SPI, UART Operating system BareMetal (No OS), FreeRTOS, SafeRTOS Nonvolatile memory (kByte) 64 Number of GPIOs 42 Number of I2Cs 1
LQFP (PN) 80 196 mm² (14 mm × 14 mm)
  • High-efficiency 32-bit CPU (TMS320C28x)
    • 60 MHz (16.67-ns cycle time)
    • 16 × 16 and 32 × 32 Multiply and Accumulate (MAC) operations
    • 16 × 16 dual MAC
    • Harvard bus architecture
    • Atomic operations
    • Fast interrupt response and processing
    • Unified memory programming model
    • Code-efficient (in C/C++ and Assembly)
  • Programmable Control Law Accelerator (CLA)
    • 32-bit floating-point math accelerator
    • Executes code independently of the main CPU
  • Dual-zone security module
  • Endianness: Little endian
  • Low device and system cost:
    • Single 3.3-V supply
    • No power sequencing requirement
    • Integrated power-on reset and brownout reset
    • Low power
    • No analog support pins
  • Clocking:
    • Two internal zero-pin oscillators
    • On-chip crystal oscillator and external clock input
    • Watchdog timer module
    • Missing clock detection circuitry
  • Up to 42 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering
  • JTAG boundary scan support
    • IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
  • Peripheral Interrupt Expansion (PIE) block that supports all peripheral interrupts
  • Three 32-bit CPU timers
  • Independent 16-bit timer in each ePWM module
  • On-chip memory
    • Flash, SARAM, Message RAM, OTP, CLA Data ROM, Boot ROM, Secure ROM available
  • 128-bit security key and lock
    • Protects secure memory blocks
    • Prevents firmware reverse-engineering
  • Serial port peripherals
    • Three Serial Communications Interface (SCI) (Universal Asynchronous Receiver/Transmitter [UART]) modules
    • One Serial Peripheral Interface (SPI) module
    • One Inter-Integrated-Circuit (I2C) bus
    • One Enhanced Controller Area Network (eCAN) bus
  • Enhanced control peripherals
    • Enhanced Pulse Width Modulator (ePWM)
    • Enhanced Capture (eCAP) module
    • Enhanced Quadrature Encoder Pulse (eQEP) module
  • Analog peripherals
    • One 12-bit Analog-to-Digital Converter (ADC)
    • One on-chip temperature sensor for oscillator compensation
    • Up to seven comparators with up to three integrated Digital-to-Analog Converters (DACs)
    • One buffered reference DAC
    • Up to four Programmable Gain Amplifiers (PGAs)
    • Up to four digital filters
  • Advanced debug features
    • Analysis and breakpoint functions
    • Real-time debug through hardware
  • 80-pin PN Low-Profile Quad Flatpack (LQFP)
  • Temperature options
    • T: –40°C to 105°C
    • S: –40°C to 125°C
    • Q: –40°C to 125°C (AEC Q100 qualification for automotive applications)
  • High-efficiency 32-bit CPU (TMS320C28x)
    • 60 MHz (16.67-ns cycle time)
    • 16 × 16 and 32 × 32 Multiply and Accumulate (MAC) operations
    • 16 × 16 dual MAC
    • Harvard bus architecture
    • Atomic operations
    • Fast interrupt response and processing
    • Unified memory programming model
    • Code-efficient (in C/C++ and Assembly)
  • Programmable Control Law Accelerator (CLA)
    • 32-bit floating-point math accelerator
    • Executes code independently of the main CPU
  • Dual-zone security module
  • Endianness: Little endian
  • Low device and system cost:
    • Single 3.3-V supply
    • No power sequencing requirement
    • Integrated power-on reset and brownout reset
    • Low power
    • No analog support pins
  • Clocking:
    • Two internal zero-pin oscillators
    • On-chip crystal oscillator and external clock input
    • Watchdog timer module
    • Missing clock detection circuitry
  • Up to 42 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering
  • JTAG boundary scan support
    • IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
  • Peripheral Interrupt Expansion (PIE) block that supports all peripheral interrupts
  • Three 32-bit CPU timers
  • Independent 16-bit timer in each ePWM module
  • On-chip memory
    • Flash, SARAM, Message RAM, OTP, CLA Data ROM, Boot ROM, Secure ROM available
  • 128-bit security key and lock
    • Protects secure memory blocks
    • Prevents firmware reverse-engineering
  • Serial port peripherals
    • Three Serial Communications Interface (SCI) (Universal Asynchronous Receiver/Transmitter [UART]) modules
    • One Serial Peripheral Interface (SPI) module
    • One Inter-Integrated-Circuit (I2C) bus
    • One Enhanced Controller Area Network (eCAN) bus
  • Enhanced control peripherals
    • Enhanced Pulse Width Modulator (ePWM)
    • Enhanced Capture (eCAP) module
    • Enhanced Quadrature Encoder Pulse (eQEP) module
  • Analog peripherals
    • One 12-bit Analog-to-Digital Converter (ADC)
    • One on-chip temperature sensor for oscillator compensation
    • Up to seven comparators with up to three integrated Digital-to-Analog Converters (DACs)
    • One buffered reference DAC
    • Up to four Programmable Gain Amplifiers (PGAs)
    • Up to four digital filters
  • Advanced debug features
    • Analysis and breakpoint functions
    • Real-time debug through hardware
  • 80-pin PN Low-Profile Quad Flatpack (LQFP)
  • Temperature options
    • T: –40°C to 105°C
    • S: –40°C to 125°C
    • Q: –40°C to 125°C (AEC Q100 qualification for automotive applications)

C2000™ real-time control MCUs are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The F2805x family of microcontrollers (MCUs) provides the power of the C28x core and CLA coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration.

An internal voltage regulator allows for single-rail operation. Analog comparators with internal 6-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3-V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency.

The Analog Front End (AFE) contains up to seven comparators with up to three integrated DACs, one VREFOUT-buffered DAC, up to four PGAs, and up to four digital filters. The PGAs can amplify the input signal in three discrete gain modes. The actual number of AFE peripherals will depend upon the TMS320F2805x device number. See Device Comparison for more details.

To learn more about the C2000 MCUs, visit the C2000™ real-time control MCUs page.

C2000™ real-time control MCUs are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The F2805x family of microcontrollers (MCUs) provides the power of the C28x core and CLA coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration.

An internal voltage regulator allows for single-rail operation. Analog comparators with internal 6-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3-V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency.

The Analog Front End (AFE) contains up to seven comparators with up to three integrated DACs, one VREFOUT-buffered DAC, up to four PGAs, and up to four digital filters. The PGAs can amplify the input signal in three discrete gain modes. The actual number of AFE peripherals will depend upon the TMS320F2805x device number. See Device Comparison for more details.

To learn more about the C2000 MCUs, visit the C2000™ real-time control MCUs page.
filter 尋找其它 即時數位電源 MCU
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
TMS320F280023 現行 具有 100 MHz、FPU、TMU、64 kb 快閃記憶體的 C2000™ 32 位元 MCU This product is from the latest generation of real-time controllers with similar attributes.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 38
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TMS320F2805x Real-Time Microcontrollers datasheet (Rev. F) PDF | HTML 2021/9/13
* 使用指南 TMS320x2805x Microcontrollers Technical Reference Manual (Rev. E) PDF | HTML 2022/6/10
* 勘誤表 TMS320F2805x Real-Time MCUs Silicon Errata (Rev. F) PDF | HTML 2021/10/1
使用指南 C2000 Real-Time Control Peripheral Reference Guide (Rev. V) PDF | HTML 2026/7/6
應用說明 C2000™ MCU JTAG Connectivity Debug (Rev. D) PDF | HTML 2026/4/29
應用說明 Serial Flash Programming of C2000 Microcontrollers (Rev. I) PDF | HTML 2025/8/14
Product overview Safety Package for Automotive and Industrial Real-Time Microcontrollers (Rev. E) PDF | HTML 2025/6/23
應用說明 Development Tool Versions for C2000™ Support (Rev. A) PDF | HTML 2024/6/26
應用說明 Power Supply and Monitoring Solution for C2000 MCU Automotive Applications PDF | HTML 2024/4/17
應用說明 Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/3/25
Product overview C2000™ Safety Mechanisms (Rev. B) 2023/11/9
應用說明 Migrating Software From 8-Bit (Byte) Addressable CPU’s to C28x CPU (Rev. A) PDF | HTML 2023/4/19
應用說明 Enhancing the Computational Performance of the C2000™ Microcontroller Family (Rev. C) PDF | HTML 2021/12/14
應用說明 C2000™ Unique Device Number (Rev. B) PDF | HTML 2020/9/17
應用說明 EEPROM Emulation for Gen 2 C2000 Real-Time MCUs (Rev. A) PDF | HTML 2020/7/23
白皮書 Taking charge of electric vehicles – both in the vehicle and on the grid (Rev. A) 2020/6/17
使用指南 SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. V) 2020/6/1
應用說明 Configurable Error Generator for Controller Area Network PDF | HTML 2019/12/19
應用說明 C2000 ADC (Type-3) Performance Versus ACQPS PDF | HTML 2019/10/7
應用說明 Calculating Useful Lifetimes of Embedded Processors (Rev. B) PDF | HTML 2019/5/7
功能安全資訊 C2000™ MCU SafeTI™ control solutions: An introduction to ASIL decomposition 2019/4/10
應用說明 MSL Ratings and Reflow Profiles (Rev. A) 2018/12/13
白皮書 Exploring the evolution and optimization of wireless power transfer 2018/7/27
證書 Certificate of Compliance 2018/7/6
證書 Certificate of Compliance E352502-20130316 2018/7/6
功能安全資訊 VDE Safety Certification Document 2018/6/22
應用說明 Programming Examples for the TMS320x28xx eCAN (Rev. B) PDF | HTML 2017/9/12
應用說明 Calculator for CAN Bit Timing Parameters PDF | HTML 2016/3/22
應用說明 Using the CAN Piccolo Bootloader at High Temperature 2015/6/29
使用指南 TMS320C28x DSP CPU and Instruction Set (Rev. F) 2015/4/10
應用說明 Calculating FIT for a Mission Profile 2015/3/24
更多文件說明 controlSUITE Getting Started Guide (Rev. C) 2015/2/9
功能安全資訊 Safety Manual for C2000 MCUs in IEC60730 Safety Applications (Rev. A) 2013/8/21
白皮書 Developing a multi-channel wireless inductive charger 2012/8/24
應用說明 InstaSPIN(tm) BLDC Lab 2011/11/15
應用說明 Oscillator Compensation Guide (Rev. A) 2010/6/18
白皮書 HVAC Dual AC Motor Control with Active PFC Implementation Using Piccolo™ MCUs 2010/4/15
應用說明 Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices 2009/11/16

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

XDS110ISO-EVM — 適用於 C2000 和 Sitara™ controlSOM 的 XDS110 隔離插入式評估模組

XDS110 隔離插入式電路板是一款適用於 C2000 和 Sitara controlSOM 的即時偵錯及 Flash 編程評估模組。可透過非隔離式 120 針腳連接器或電氣隔離式 16 針腳連接器連接 C2000 及 Sitara controlSOM。兩種接頭皆具備 JTAG/cJTAG/SWD 支援和全雙工 UART 埠。電路板支援兩個額外功能，可在目標電路板偵錯中使用：序列周邊介面 (SPI) 至四個隔離式數位類比轉換器 (DAC) 通道，以及最多六個數位和四個類比非隔離通道。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

ALGO-3P-UISP1-TI — 適用於德州儀器裝置的 Algocraft μISP1 編程器

μISP 可以連接到主機 PC (內建 RS-232、USB、LAN 連接) 或獨立模式工作。

在單機模式下，只要按下「開始」按鈕或透過一些 TTL 控制線，就可以執行編程週期。

其緊湊的尺寸和多功能性可輕鬆整合到生產環境、手動和自動化程序中。

從：Algocraft
支援產品和硬體
子卡

TMDXCNCD28055ISO — Piccolo F2805x 隔離式 USB controlCARD

TMDXCNCD28055ISO 為適用於 Piccolo F2805x 系列之 DIMM100 controlCARD 式評估和開發工具。controlCARD 是利用兩個標準外型規格之一 (100 針腳 DIMM 或 180 針腳 HSEC) 的完整電路板級模組，可提供小巧型單板控制器解決方案。

對於首次評估，controlCARD 通常搭配擴充站或應用套件一起購買。TMDXCNCD28055ISO 控制卡需要 DIMM100 基板才能正常運作。

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU200-U — XDS200 USB 偵錯探測器

XDS200 是為 TI 嵌入式裝置偵錯的偵錯探測器（模擬器）。對於大多數裝置，建議使用較新、成本較低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 支援單一 Pod 中廣泛的標準（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 偵錯探針在所有配備嵌入式追蹤緩衝器 (ETB) 的 Arm® 與 DSP 處理器中均支援核心與系統追蹤。

XDS200 透過 TI 20 接腳連接器（配備適用 TI 14 接腳、Arm Cortex® 10 接腳和 Arm 20 接腳的多重轉接器）連接到目標電路板，並透過 USB2.0 高速 (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU560V2STM-U — XDS560™ 軟體 v2 系統追蹤 USB 偵錯探測器

XDS560v2 是 XDS560™ 系列偵錯探測器中性能最高的，且同時支援傳統 JTAG 標準 (IEEE1149.1) 與 cJTAG (IEEE1149.7)。  請注意，其不支援序列線偵錯 (SWD)。

所有 XDS 偵錯探測器均在所有配備嵌入式追蹤緩衝器 (ETB) 的 ARM 與 DSP 處理器中支援核心與系統追蹤。  對於針腳上的追蹤，則需要 XDS560v2 PRO TRACE。

XDS560v2 透過 MIPI HSPT 60 針腳接頭 (具有用於 TI 14 針腳、TI 20 針腳和 ARM 20 針腳的多轉接器) 連接到目標電路板，並透過 USB2.0 高速 (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
偵錯探測器

TMDSEMU560V2STM-UE — XDS560v2 System Trace USB 與乙太網路偵錯探測器

The XDS560v2 is the highest performance of the XDS560™ family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors (...)

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
硬體程式設計工具

ALGO-3P-WRITENOW — Algocraft WriteNow！程式設計工具

WriteNow! 系統內編程器系列是可編程產業的一大突破。此編程器支援多家製造商的眾多裝置 (例如微控制器、記憶體、CPLD 與其他可編程裝置)。其尺寸精巧，便於整合至 ATE 與固定裝置。編程器可單機運作，或透過內建的 RS-232、LAN 與 USB 連接埠與主機電腦連線，並隨附操作簡易的工具軟體。

從：Algocraft
支援產品和硬體
軟體開發套件 (SDK)

C2000WARE — C2000Ware for C2000 Microcontrollers

C2000Ware 是一套完整的軟體和文件，可將開發時間縮至最短。其中包括裝置專用驅動程式，程式庫和週邊設備範例。

  • C2000 controlCARD、實驗套件及 LaunchPad 的硬體設計電路圖、BOM、Gerber 檔案和文件。
  • 裝置專用支援檔案、位元欄位標頭、位元欄位裝置週邊設備範例 (包括 LaunchPad™ 示範) 及裝置開發使用指南。
  • 裝置專用驅動程式庫和以驅動程式為基礎的週邊設備範例。
  • FreeRTOS 核心、C28x 與 Cortex-M4(CM) 連接埠與示範範範例。
  • 裝置專用與核心程式庫，例如：
    • (...)
支援產品和硬體
IDE、配置、編譯器或偵錯程式

C2000_CLA_SAFETI_CQKIT_RV — C2000™ and CLA safety compiler qualification kit (leverages compiler release validations)

開發安全編譯器資格認證套件是為了協助客戶對 TI ARM、C6000、C7000 或 C2000/CLA C/C++ 編譯器的使用進行認證，以確保符合功能安全標準，如 IEC 61508 和 ISO 26262。

安全編譯器資格認證套件：

  • 對 TI 客戶免費
  • 不需要使用者進行資格測試
  • 支援編譯器覆蓋範圍分析*
    • * 覆蓋範圍資料收集的說明可從每個 QKIT 下載頁面下載。
  • 不包括 Validas 諮詢

如需存取安全編譯器資格認證套件，請按一下上面其中一個索取按鈕。

如需進一步了解功能安全產品，請造訪 (...)

支援產品和硬體
IDE、配置、編譯器或偵錯程式

CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

支援產品和硬體
快速入門

TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud

From evaluation to deployment the TI Developer Zone provides a comprehensive range of software, tools and training to ensure that you have everything you need for each stage of the development process.
支援產品和硬體
作業系統 (OS)

WHIS-3P-SAFERTOS — WITTENSTEIN SAFERTOS 預先認證的安全 RTOS

SAFERTOS® 是專為嵌入式處理器設計的獨特即時作業系統。經 TÜV SÜD 預先認證，符合 IEC 61508 SIL3 與 ISO 26262 ASILD 標準。SAFERTOS® 是由 WHIS 專家團隊專為安全而打造，適用於全球重要安全應用。WHIS 與德州儀器的合作已經超過十年。在此期間，WHIS 已將 SAFERTOS® 移植至各種 TI 處理器，支援所有熱門核心，並可依要求提供其他架構。SAFERTOS® 專為您的特定處理器/編譯器組合量身打造，隨附完整的原始程式碼與設計保證包，可完全一目了然整個設計生命週期。許多 WHIS 客戶開始使用 FreeRTOS (...)

從：WITTENSTEIN High Integrity Systems
支援產品和硬體
應用軟體及架構

INSTASPIN-BLDC — InstaSPIN™-BLDC 解決方案

In keeping with TI’s philosophy of making motor control more accessible and easier to use by design engineers, TI is proud to announce the release of its newest motor control technology, InstaSPIN-BLDC. Targeted at low cost BLDC applications, InstaSPIN-BLDC is a sensorless control technique based (...)

支援產品和硬體
驅動程式或資料庫

C2000-DIGITAL-CONTROL-LIBRARY — C2000 數位控制函式庫

C2000 數位控制函式庫 (DCL) 為使用德州儀器 C2000 MCU 平台的數位控制應用程式開發人員提供一套穩健的軟體函式。函式庫中的所有函式均以 C 或組合語言原始碼形式提供。DCL 版本 3.0 包含 167 項控制器和支援功能。代表十種不同類型的控制器：五種 PID 類型與五種「直接形式」類型。函式庫也包含線性與非線性增益排程器。支援功能可分為三類：資料記錄、性能測量和暫態擷取。函式庫包含一組範例專案，說明 DCL 函式如何應用於使用者專案中，以及一個 Simulink 區塊集。
支援產品和硬體
驅動程式或資料庫

CONTROLSUITE — controlSUITE™ 套裝軟體：適用於 C2000™ 微控制器的軟體和開發工具

適用於 C2000™ 微控制器的 controlSUITE™ 是一系列軟體基礎架構、工具和文件，專為大幅縮短系統開發時間而設計。從裝置專用驅動器和支援軟體，到複雜系統應用的完整範例，controlSUITE™ 可在開發與評估的每個階段提供所需資源。

目前包含適合數位電源設計人員的 powerSUITE 及適合工業驅動器設計人員的 DesignDRIVE！

注意：僅可透過 C2000Ware 獲得全新 Piccolo F28004x 系列的軟體支援

lock = 需要匯出核准 (1 分鐘)
支援產品和硬體
驅動程式或資料庫

IEC60730SWPACKAGES — C2000 SafeTI™ 60730 軟體套件

C2000 MCU SafeTI-60730 軟體套件包含 UL 認證的認可元件，SafeTI™ 軟體套件有助於更輕易且更快速的透過 C2000™ 即時控制微控制器 (MCU) 完成功能安全消費者應用軟體設計。在這些 SafeTI 軟體套件中的軟體皆為經 UL 認證的認可元件，除符合 UL 1998:2008 Class 1 標準外，亦遵循 IEC 60730-1:2010 Class B 標準，且兩者都包括家用電器、電弧偵測器、電源轉換器、電動工具、電動自行車等其他應用。在 SafeTI 軟體套件中可選擇 TI C2000 MCU，並可利用這些 MCU (...)

支援產品和硬體
軟體程式設計工具

UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors

UniFlash 是 TI 龐大 CCStudio™ 開發生態系統的一部分，是一款用於在 TI 微控制器與無線連線裝置上對晶片內快閃記憶體進行燒錄，以及在 TI 處理器上對板載快閃記憶體進行燒錄的軟體工具。UniFlash 提供圖形化介面與命令行介面，並可在桌面上或雲端中執行。

UniFlash 可從 CCStudio™ 開發人員區上的雲端執行，或在下載後於 Windows®、Linux® 和 macOS® 電腦中使用。

請注意，mmWave、AMx、K2G 和 J7 裝置不支援 macOS。AMx、K2G 和 J7 裝置僅於命令列上支援。

支援產品和硬體
模擬型號

F28055, F28054, F28053, F28052, F28051, F28050 PN BSDL Model

SPRM741.ZIP (1 KB) - BSDL 模型
支援產品和硬體
設計工具

C2000-3P-SEARCH — C2000 第三方搜尋工具

TI has partnered with multiple companies to offer a wide range of solutions and services for TI C2000 devices. These companies can accelerate your path to production using C2000 devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your (...)

支援產品和硬體
參考設計

TIDM-1AXISMTR-PFC-5X — 具有整合式功率因數修正功能的單軸馬達控制參考設計

此參考設計展示了將單軸馬達控制和功率因數校正 (PFC) 整合至單一微控制器的最佳做法。這種做法在設計變頻壓縮機時很受歡迎，在 HVAC 系統中尤其受用。此實作經過最佳化後，可利用無感測器磁場定向控制 (FOC) 演算法在 TMS320F2805x 微控制器上驅動永磁同步馬達 (PMSM) 和雙相交錯式 PFC。FOC 演算法可在廣泛速度中維持效率，並藉由處理馬達的動態模型，將瞬態相位的扭力變化納入考量。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
LQFP (PN) 80 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片