TRF1305C2

Name: TRF1305C2
Brand: TI
SKU: TRF1305C2
Price: 19.49 USD

現行

具有共模控制的 DC 至 >6.5GHz、5dB 增益、全差動 RF 放大器

立即訂購

產品規格表

document-pdfAcrobat TRF1305C2 5dB-Gain, Dual-Channel, DC to > 6.5GHz BW, RF Fully Differential Amp datasheet (英文) PDF | HTML

TRF1305C2

現行

產品規格表

立即訂購

產品詳細資料

Type

RF FDA

Frequency (min) (MHz)

0

Frequency (max) (MHz)

6600

Gain (typ) (dB)

5

Noise figure (typ) (dB)

13.3

OIP3 (typ) (dBm)

31.5

P1dB (typ) (dBm)

14.6

Frequency of harmonic distortion measurement (GHz)

2

3rd harmonic (dBc)

-54

OIP2 (typ) (dBm)

63

2nd harmonic (dBc)

-62

Supply voltage (V)

5

Current consumption (mA)

180

Number of channels

2

Operating temperature range (°C)

-40 to 105

Rating

Catalog

Output enable

Yes

Type

RF FDA

Frequency (min) (MHz)

0

Frequency (max) (MHz)

6600

Gain (typ) (dB)

5

Noise figure (typ) (dB)

13.3

OIP3 (typ) (dBm)

31.5

P1dB (typ) (dBm)

14.6

Frequency of harmonic distortion measurement (GHz)

2

3rd harmonic (dBc)

-54

OIP2 (typ) (dBm)

63

2nd harmonic (dBc)

-62

Supply voltage (V)

5

Current consumption (mA)

180

Number of channels

2

Operating temperature range (°C)

-40 to 105

Rating

Catalog

Output enable

Yes

VQFN-FCRLF (RYP)

16

7.5 mm² 3 x 2.5

Three performance-optimized power gain variants:
- 15dB (TRF1305A2)
- 10dB (TRF1305B2)
- 5dB (TRF1305C2)
Fixed gain can be reduced with external resistors
Wide large-signal RF bandwidth:
- D2D: 6.6GHz (3dB), 5.5GHz (1dB)
- S2D: 6.6GHz (3dB), 4.9GHz (1dB)
OP1dB (differential 100Ω load):
- D2D: 14.6dBm (2GHz), 11.4dBm (4GHz)
- S2D: 14.5dBm (2GHz), 11.4dBm (4GHz)
OIP3 (PO = 1dBm/tone):
- D2D: 31.5dBm (2GHz), 23dBm (4GHz)
- S2D: 30.5dBm (2GHz), 21dBm (4GHz)
Noise Figure:
- D2D: 13.3dB (2GHz), 15.3dB (4GHz)
- S2D: 13.8dB (2GHz), 16.9dB (4GHz)
Slew rate: 25kV/µs
Large input (±1V) and output (±0.5V) common-mode voltage ranges
Flexible configurations and modes:
- Single-ended input, differential output (S2D)
- Differential input, differential output (D2D)
- AC- or DC-coupled input/output
- Adjustable output common-mode voltage
- Input common-mode range extension mode
Supports 5V, single or split supplies
Active power dissipation: 447.5mW per channel
Power-down for each channel

Three performance-optimized power gain variants:
- 15dB (TRF1305A2)
- 10dB (TRF1305B2)
- 5dB (TRF1305C2)
Fixed gain can be reduced with external resistors
Wide large-signal RF bandwidth:
- D2D: 6.6GHz (3dB), 5.5GHz (1dB)
- S2D: 6.6GHz (3dB), 4.9GHz (1dB)
OP1dB (differential 100Ω load):
- D2D: 14.6dBm (2GHz), 11.4dBm (4GHz)
- S2D: 14.5dBm (2GHz), 11.4dBm (4GHz)
OIP3 (PO = 1dBm/tone):
- D2D: 31.5dBm (2GHz), 23dBm (4GHz)
- S2D: 30.5dBm (2GHz), 21dBm (4GHz)
Noise Figure:
- D2D: 13.3dB (2GHz), 15.3dB (4GHz)
- S2D: 13.8dB (2GHz), 16.9dB (4GHz)
Slew rate: 25kV/µs
Large input (±1V) and output (±0.5V) common-mode voltage ranges
Flexible configurations and modes:
- Single-ended input, differential output (S2D)
- Differential input, differential output (D2D)
- AC- or DC-coupled input/output
- Adjustable output common-mode voltage
- Input common-mode range extension mode
Supports 5V, single or split supplies
Active power dissipation: 447.5mW per channel
Power-down for each channel

The TRF1305C2 is a very high performance, closed-loop, dual-channel RF amplifier that has an operational bandwidth from true-dc to >6.5GHz. The device has excellent performance to drive high-speed, high-performance ADCs, such as the ADC12DJ5200RF and ADC32RF5x with a dc- or ac-coupled interface. The amplifier is optimized for use in RF, zero and complex IF, and high-speed time-domain applications. The device is optimized for performance in the fixed gain configuration. If lower gain is desired, use external resistors.

The TRF1305C2 features a VOCM pin that allows setting different output common-mode and input common-mode voltages; for example, level-shifting or for most IQ down-converter ADC-interface applications that have differing dc common-mode voltages. The TRF1305C2 also features a floating two-rail split or single-supply option, and a MODE pin that allows extending the input common-mode range closer to the supplies. The device also has a power-down feature to turn-off each channel individually.

The device uses TI’s proprietary advanced BiCMOS process and is available in a space-saving, 2.5mm × 3mm, 16-pin, WQFN-FCRLF package.

The TRF1305C2 is a very high performance, closed-loop, dual-channel RF amplifier that has an operational bandwidth from true-dc to >6.5GHz. The device has excellent performance to drive high-speed, high-performance ADCs, such as the ADC12DJ5200RF and ADC32RF5x with a dc- or ac-coupled interface. The amplifier is optimized for use in RF, zero and complex IF, and high-speed time-domain applications. The device is optimized for performance in the fixed gain configuration. If lower gain is desired, use external resistors.

The TRF1305C2 features a VOCM pin that allows setting different output common-mode and input common-mode voltages; for example, level-shifting or for most IQ down-converter ADC-interface applications that have differing dc common-mode voltages. The TRF1305C2 also features a floating two-rail split or single-supply option, and a MODE pin that allows extending the input common-mode range closer to the supplies. The device also has a power-down feature to turn-off each channel individually.

The device uses TI’s proprietary advanced BiCMOS process and is available in a space-saving, 2.5mm × 3mm, 16-pin, WQFN-FCRLF package.

filter

尋找其它 RF 全差動放大器 (FDA)

下載觀看有字幕稿的影片影片